Audio-Technica AT-LPA2__ Review_1
|

Audio-Technica AT-LPA2 Turntable Review


Unfortunately, limited production runs can be cruel, leaving many vinyl enthusiasts missing out on the classic limited-edition AT-LP2022. Carrying forward the design philosophy of that celebrated turntable, Audio-Technica introduced the higher-tier AT-LPA2 this year.

This time, the turntable is a full production model rather than a limited run. Featuring an updated tonearm and cartridge, it elevates performance to a higher class. Looking at Audio-Technica’s current product lineup, the AT-LPA2 stands as their flagship turntable. Even so, priced at approximately $2,344 (NTD 75,000), it allows audiophiles to experience the culmination of Audio-Technica’s turntable engineering without an astronomical price tag.

Acrylic Chassis Design

Acrylic is a familiar material to most—a thermoplastic polymer known for its transparency, high workability, and a density roughly half that of glass. While it might not sound like a traditional luxury material, acrylic is exceptionally well-suited for high-performance audio components.

Seasoned audiophiles know that turntable design is ultimately about controlling mechanical resonance. Acrylic is inherently insensitive to external vibrations, exhibiting a damped, muted sonic response when struck. Furthermore, acrylic shares a resonant frequency similar to vinyl records. Theoretically, this allows engineers to target vibration damping far more effectively to achieve superior acoustic stability.

High-end designs like the Vertere Acoustics SG-1 also utilize acrylic construction to great effect.

The AT-LPA2 fully exploits these material advantages, featuring a substantial 30 mm thick acrylic plinth paired with a 20 mm thick acrylic platter structure. This design provides noticeably greater mass than the previous AT-LP2022, enhancing rotational stability and vibration suppression during playback. The belt-drive architecture is kept intentionally streamlined to minimize unnecessary mechanical energy transfer.

Noticeably, the AT-LPA2 includes a separate outboard chassis. Rather than a phono stage, Audio-Technica designed this module to house the power supply and main control circuitry independently. Encased in its own aluminum chassis, it features controls for power and speed selection (33 and 45 RPM). As a result, the main turntable plinth remains completely free of buttons, preserving an ultra-clean, transparent aesthetic while isolating the delicate signal path from electrical noise.

Precision Drive & Tonearm Setup

Beneath the platter bearing sits a black square optical sensor that continuously monitors rotation and controls the DC servo motor in real time, ensuring precise speed stability. Measured specifications show wow and flutter below 0.12% WRMS (at 33 RPM) and a signal-to-noise ratio exceeding 60 dB—crucial foundations for clean analog reproduction.

The tonearm utilizes a lightweight, high-rigidity silver carbon-fiber straight armtube mounted on an adjustable metal base. This setup allows straightforward adjustment of Vertical Tracking Angle (VTA) and anti-skating, ensuring the stylus maintains optimal groove alignment to minimize physical distortion.

To achieve precise tracking control, Audio-Technica developed a new line-suspended anti-skate mechanism that offers fine adjustment accuracy, while the tonearm height can be freely adjusted to counteract skating forces and optimize tracking performance. The tracking force range covers 0 to 3 grams, supported by two included counterweights (110 g and 130 g).

Audio-Technica recommends the 110 g counterweight for cartridges weighing 6.1–9.2 g, and the 130 g weight for cartridges weighing 9.2–13.9 g.

Premium Moving Coil Cartridge

For the cartridge, the AT-LPA2 comes pre-installed with Audio-Technica’s AT-OC9XEN Dual Moving Coil (MC) cartridge. It features a custom CNC-machined aluminum body for low resonance, a nude elliptical stylus, and coils wound with high-purity PCOCC single-crystal copper wire. This setup enhances channel separation and reduces distortion, capturing delicate musical nuances with accuracy.

At the base, the AT-LPA2 features custom-designed large-diameter isolation feet machined from aluminum with internal rubber damping elements. A gentle touch reveals a controlled, damped compliance that supports the turntable’s weight while isolating it from surface vibrations. Each foot is individually height-adjustable to ensure a perfectly level plinth.

Setting up the AT-LPA2 is straightforward, with the primary task being the tonearm calibration. Following the manual for the factory-installed cartridge, select the lighter 110 g counterweight and adjust it until the arm floats in balance. Next, set the tracking force to the recommended 2.0 grams. For anti-skate, thread the line under the arm lift. The anti-skate weight itself is 2.0 g (or 3.0 g with the auxiliary weight attached).

Based on the recommended anti-skating ratio, setting it to 1.0x provides accurate force for the bundled cartridge.

Acoustic Performance

For listening tests, I connected the AT-LPA2 to a Luxman E250 phono preamplifier, feeding a Naim Uniti Star streaming integrated amplifier driving Focal Utopia Diablo flagship standmount loudspeakers. The AT-LPA2 delivered an open, transparent soundstage with high instrument separation. Achieving this level of analog texture typically requires a thoroughly tuned turntable system.

The AT-LPA2 exhibits strong baseline performance right out of the box, with key alignments pre-configured so that straightforward assembly yields immediate results.

Compared to the previously reviewed AT-LP2022, the AT-LPA2 presents a more composed, effortless sound with a lower noise floor and a slightly warmer, richer overall tonal balance.

Playing “I’ve Got You Under My Skin” from Diana Krall’s album *When I Look in Your Eyes*, the central vocal image stood well-focused, full-bodied, and elastic. The frequency spectrum remained balanced, exhibiting the effortless ease usually reserved for high-end digital systems, without the over-thickened bass or compressed dynamics common in entry-level turntables.

Instrumental separation was clear and well-defined. The acoustic bass displayed solid physical presence rather than a diffuse low-end rumble, rendering distinct note textures without boominess. Compared to my memory of the AT-LP2022, the piano tone gained a sweeter, rounder quality, capturing subtle keystroke dynamics and natural wood resonance.

Comparative Listening & Dynamic Drive

Comparing Qobuz high-resolution streaming against the vinyl playback was revealing. While the Naim Uniti Star sounds impressive playing digital streams, switching directly to the AT-LPA2 highlighted the vinyl source’s natural body and organic warmth. On vinyl, detail reproduction felt clear yet gentle, smoothing out harsh vocal sibilance while maintaining dynamic energy and a lifelike, present soundstage.

Next, listening to Austrian pianist Alfred Brendel performing Schubert’s *Impromptus, D. 780*, the AT-LPA2 rendered a full, resonant piano timbre. Overtones layered cleanly over the instrument’s physical frame, reflecting natural soundboard resonance and responsive key feel. The bundled AT-OC9XEN MC cartridge demonstrated fine resolution, capturing delicate performance nuances far more vividly than the MM cartridge supplied with the AT-LP2022.

From soft pianissimos to forceful chord strikes, the dynamic contrast remained wide while preserving a warm, natural piano tone.

Finally, playing Megadeth’s “Into the Lungs of Hell” from *So Far, So Good… So What! *, the turntable delivered full, impactful drive. Where digital streaming can sometimes render heavy metal tracks dry or thin, the vinyl presentation delivered weight and momentum. Distorted electric guitar riffs sounded thick and textured without becoming harsh or fatiguing, while kick drum strikes maintained tight, distinct outlines.

The band’s overall presentation retained layered clarity and physical presence.

Conclusion

With solid construction and a focused feature set, the Audio-Technica AT-LPA2 meets the core requirements for high-quality analog sound. Positioned as Audio-Technica’s flagship turntable, its retail price of $2,344 (NTD 75,000) makes it a competitive offering in its class. Setup and calibration are accessible enough for developing vinyl enthusiasts, yet its resolution and musical drive will easily satisfy experienced audiophiles looking for a refined analog source.

Specifications

* Type: Belt-drive turntable
* Motor: DC servo motor with active speed sensor
* Speeds: 33-1/3 RPM, 45 RPM
* Wow and Flutter: < 0.12% WRMS (at 33 RPM) * Signal-to-Noise Ratio: > 60 dB
* Tonearm: Straight carbon-fiber tonearm
* Cartridge: AT-OC9XEN MC stereo cartridge
* Tracking Force: 2.0 g
* Weight: 8.4 kg
* Dimensions (W × D × H): 420 × 340 × 135 mm
* Included Accessories: Control unit, dust cover, platter (with drive belt), dust cover hinges, isolation feet, 45 RPM adapter, audio interconnect cable, hex wrench, gloves