DC-Cable MSP-2 Power Cable Review

DC-Cable MSP-2 Power Cable Review


Last year was undoubtedly the most active year for DC-Cable.

Prior to the Kaohsiung Audio Show, they launched the “Three Hearts Series” of three speaker cables. Before the Taipei TAA Audio Show, DC-Cable further refined their classic AV-2100 signal cable, introducing the “DSC Series” with three signal cables. Although these cables are not particularly expensive, each is a painstaking creation that involves repeated trials. The cables differ in conductor materials, internal geometric structures, shielding, and coating layers, with sound characteristics that are uniquely nuanced, allowing entry-level enthusiasts to enjoy the art of cable tuning.

DC-Cable MSP-2 Power Cable Review

I was involved in reviewing these cables, and whether it was the Three Hearts Series speaker cables or the DSC Series signal cables, each cable had its own strengths. They were so impressive that one would want to purchase every single cable!

The Beginning of the MSP Series Development

Just when we thought DC-Cable’s new product lineup for 2016 was complete, they surprised everyone by launching three power cables in the “Mysterious Power” or MSP series – MSP-1, MSP-2, and MSP-3 – right before the Taipei Electronics Association Audio Show.

These three power cables continued the design philosophy of the Three Hearts and DSC series. With varying conductor materials and geometric structures, each had a clear positioning: MSP-1 “narrates mid-low frequency fullness and resonance”, MSP-2 “strengthens quantity and detail interweaving”, and MSP-3 “embellishes mid-high frequency layers and speed”.

Our site had previously reviewed the MSP-1’s sound performance, and now it’s MSP-2’s turn to take center stage.

According to DC-Cable, although MSP-2 is the middle cable in the MSP series, it was actually the starting point from which MSP-1 and MSP-3 were derived.

DC-Cable’s Mr. Lee revealed to me that power cables directly impact equipment sound and interact with the power grid. Most electrical grids are contaminated with noise. Initially, their developed power cables sounded good at first but became less enjoyable with prolonged listening, prompting them to start over completely! Therefore, the development difficulty of the MSP series power cables was far greater than the Three Hearts speaker cables and DSC signal cables, almost to the point of abandonment.

DC-Cable MSP-2 Power Cable Review

So don’t think of the MSP series power cables as ordinary cables – their development process was filled with untold hardships and tears!

Multi-Core Pure Copper Design

In DC-Cable’s “Three Hearts Series” speaker cables from last year, the mid-range “Fine Heart T2” used 1700-strand 5N fine and thick copper conductors, with strand count double that of the “Passionate Heart T1”. This approach emphasizes high and low-frequency portions and enhances detail clarity.

The DSC-2 from last year’s three DSC series signal cables used pure copper wire over 1.0mm, combined with multi-strand silver wire in a single-strand design to reduce the silver wire’s potential harshness.

As for the MSP-2 we’re discussing now, according to DC-Cable’s website, the power and neutral lines use 1000-strand pure copper conductors, while the ground line uses a conductor composed of over 200 copper strands. By increasing the number of conductor strands, MSP-2 enhances sound detail clarity, very similar to the approach of the “Fine Heart T2”.

Sparing No Expense: Aluminum Terminal Shell

After selecting the conductor material and determining the sound foundation, the next considerations were coating and insulation.

DC-Cable states that the power, neutral, and ground lines in MSP-2 are wrapped with a “196 pure copper” woven network.

What exactly is 196 pure copper? And why use this copper network when there’s already a ground line? I specifically called Mr. Lee from DC-Cable to inquire.

Mr. Lee explained that many Taiwanese households do not properly ground their electrical systems. The pure copper woven network in MSP-2 functions similarly to a signal cable’s network, serving a grounding effect.

The “196” refers to the network’s density. Mr. Lee mentioned that typical networks are made of pure tin at 128 density, while MSP-2 uses a high-density pure copper weave for enhanced performance.

The shielding layer continues the DSC series design, using aluminum foil to block RFI/EMI electrical noise interference, ensuring sound purity and further improving detail refinement. A special hardened PE material prevents internal material oxidation, with a final outer layer of brown-toned spiral woven coating that both protects the cable and provides vibration dampening.

Beyond the cable itself, DC-Cable was extremely meticulous in selecting male and female plugs.

DC-Cable MSP-2 Power Cable Review

The manufacturer initially planned to use standard plastic terminals with an upgrade option. However, just before finalizing the product, the DC-Cable owner unexpectedly decided to use upgraded terminals across the MSP series.

Examining the MSP-2’s terminals, the shell is made of aluminum alloy. Apart from screw holes for fixing, there are no visible seams, tightly encasing the terminal部分, which should provide superior vibration isolation compared to standard terminals.

Furthermore, many power cables experience cable weaving and PE coating separation at the terminal after multiple insertions, exposing internal conductors. However, I noticed that the MSP-2’s terminal and cable junction is extremely solid, suggesting the cable will be more durable than typical power cables.

I’ll continue the translation of the second part of the article, maintaining the previous translation style:

Eliminating Tension, Bringing Comfort

I first began listening to the MSP-2 a couple of days before New Year’s Eve. Unfortunately, the company’s reference integrated amplifier, Linear Acoustics LAV-60 II, had unexpectedly malfunctioned.

While the listening room still had a Huawei OSA-88-1BV MK2 tube amplifier, the equipment was expensive and heavy. Moving it alone risked damaging the device.

To avoid disturbing colleagues rushing to complete their year-end drafts, I used the company’s last remaining amplifier – the Integra DTR-50.7 as a reference.

The source was a Linn Akurate Exakt DSM playing files stored on the company’s NAS, connected via coaxial digital cable to the Integra DTR-50.7 for DAC conversion.

The speakers were the Dynaudio Contour 30, which happened to be positioned in the listening room at the time.

I connected the MSP-2 to the Integra DTR-50.7, using the MSP-1 as a reference, and selected various music types from the NAS for testing.

On their fan page, DC-Cable described MSP-1’s sound as “narrating mid-low frequency fullness and resonance”, while MSP-2 was characterized as “strengthening quantity and detail interweaving”.

However, during actual listening, I discovered that MSP-1 actually had a balanced high, mid, and low-frequency distribution. Its texture was solid and compact, with extremely precise details, sounding almost like a silver-plated copper wire rather than a pure copper cable.

Already satisfied with MSP-1’s sound, I was surprised to find MSP-2 took things a step further. It eliminated the tense texture, replacing it with a relaxed air, giving music a comfortable and soft quality. The sound became more natural and moving, with a larger dynamic range. While each sound wasn’t as powerful as MSP-1, the musical emotion became more vivid.

Smoothing Rough Edges, Focusing More Clearly

Although both MSP-1 and MSP-2 are copper cables, their characteristics differ significantly. The former is neutral and concentrated, while the latter is warm and expansive.

Looking at the unfamiliar system with its complex wiring, I decided to use a headphone system for more precise evaluation.

I paired both power cables with a Moon 230 HAD DAC and headphone amplifier, driving Beyerdynamic headphones.

First, I played “An He Bridge” from Song Dongye’s folk album “North of An He Bridge”.

Both MSP-1 and MSP-2 revealed the opening drum strikes with bouncy texture. However, MSP-1’s drum sound was fuller, while MSP-2 presented a more balanced, healthier tone.

As Song Dongye began singing, the MSP-1 already offered a warm, vivid rendering. But the MSP-2 not only maintained the warm, deep tone but also eliminated rough edges. Particularly in the instrumental interlude at 2:02, the erhu’s lines became smoother and more fluid.

Additionally, with MSP-1, vocals and accompanying instruments clustered toward the center. The MSP-2 significantly improved soundstage width and depth, creating comfortable spacing between the vocals and other instruments.

Soundstage and Dynamics Significantly Expanded

The differences between MSP-1 and MSP-2 became even more apparent with large-scale, fast-paced musical pieces.

Playing the opening chorus of Bach’s secular cantata BMW205, with MSP-1, while the tone was warm, the spatial sense and frequency extensions seemed constrained. The high-pitched recorder symbolizing winds was audible in the recording space’s background but often masked by other instruments.

With MSP-2, the performance transformed: the spatial sense became more expansive, presenting a magnificent chorus and orchestral performance. Frequency extensions notably increased, making drum sounds fuller and more powerful. The recorder, while still in the background, became more distinct and less overshadowed.

The MSP-2 demonstrated excellent focus, making all instruments and vocals clearer. It brought a light, airy quality to the sound, with a more relaxed texture and more vivid details. The chorus gained transparency, and drums became agile rather than heavy.

This listening experience was like sifting cake ingredients through a fine sieve – creating a softer, more delectable result.

Treating Muscular Tension

Although both MSP-1 and MSP-2 use pure copper conductors, the MSP-2’s multi-core design provides more precise focus, a more breathable and comfortable texture, and a wider soundstage and dynamic range.

It’s like a person with muscle tension receiving a massage – suddenly feeling refreshed and unrestricted.

If you find your home audio system’s texture, spatial sense, or dynamic variations feeling limited, the MSP-2 could provide significant improvement!

Product Specifications

  • Model: DC-Cable MSP-2
  • Type: Power Cable
  • Manufacturer: DC-Cable