Entreq Challenger 3V Infinity Review
I was immediately curious: how would these three major evolutionary steps be applied to conventional cables? After all, every type of cable uses standard connectors, ruling out the hook-type connector used for ground wires. And while tuning rings are already present on some types of cables, one thing was certain: the new Infinity cable conductors must represent a significant upgrade.
It wasn’t until I got my hands on the latest Challenger 3V Infinity power cable that my questions were finally answered.
Evolution of the Challenger Series
Strictly speaking, the Challenger 3V Infinity is the third generation of the Challenger series power cables. Based on my research, the first generation had a white cable jacket and already featured the signature square wooden tuning box.
The second generation adopted Entreq’s characteristic black cotton jacket and upgraded the connectors to Furutech’s previous flagship FI-50M and FI-50, adding “Series II” to the model name. Now, entering the Infinity era, the cables are fitted with Furutech’s latest FI-50M NCF and FI-50 NCF connectors and incorporate the new generation “special magnetic absorber”—the bamboo tube.
Craftsmanship and Unique Lengths
With the advent of the Infinity generation, Entreq’s factory has acquired significant new equipment, enabling the realization of Farmer Per-Olof Friberg’s (Entreq’s founder) vision to an even greater extent. This is evident in the refined craftsmanship of the packaging wooden boxes. The side of the box clearly indicates that the Challenger 3V Infinity sent for review is 1.65 meters long. Some might find this length peculiar: why 1.65 meters?

Observing the labels on their wooden boxes, you’ll notice that their cables never come in standard lengths like one or two meters, but rather unique measurements. The reason for these specific lengths is to combat the “Antenna effect,” effectively minimizing interference and noise.
Key Features
* **Type:** Power Cable
* **Generation:** Third (Infinity Series)
* **Connectors:** Furutech FI-50M NCF (Male) & FI-50 NCF (Female)

* **Conductor Design:** Shotgun architecture (separate positive/negative conductors), Asymmetrical design (conductors wound in opposite directions with differing lengths)
* **Noise Reduction:** Integrated bamboo tube (special magnetic absorber)
* **Typical Lengths:** Non-standard (e.g., 1.65m) to reduce Antenna effect
Design Philosophy
As is widely known, Entreq employs the so-called Shotgun architecture for all their cable types, meaning the positive and negative conductors are always separated, never bundled together. These two distinct conductor runs are internally twisted in opposite directions and have different lengths—a design Entreq terms “Asymmetrical.”

These seemingly minor details, while simple in concept, are priceless in practice. Look across the industry: how many mass-market cable manufacturers are willing to invest the time and effort to tailor their products for optimal sound quality? None. This is why Entreq cables are always marked with a unique serial number, because every single cable or pair is a custom-ordered, handmade product.
Since power cables inherently have a ground terminal, the EEDS (External Earth Drain System) is not necessary. However, Farmer Per-Olof continued to contemplate how to further reduce noise, culminating in the “bamboo tube” seen on the Challenger 3V Infinity.
Inside the packaging, you’ll find two elastic bands. Upon closer inspection, the bamboo tube has pre-cut notches at both ends and grooves along the sides. It’s clear the elastic bands are used to secure the cable body to the bamboo tube, ensuring the cable remains as close as possible to it for maximum effectiveness.
Listening Experience
Listening to the first track on Aedle’s “25,” Aedle’s voice conveyed greater emotion, with richer decay. The bass also exhibited increased depth, and the percussion hits in the middle section felt more elastic. The added reverb in the mix sounded clearer. Simply put, the overall detail was significantly enhanced, yet the timbre and tonal balance remained virtually unchanged, adhering to Farmer Per-Olof’s consistent principle of “neutrality.”

The Challenger 3V Infinity doesn’t deliver the forceful impact often associated with many high-end power cables, yet it still provides a clearly audible improvement. Instead, it makes the sound gentler and more refined. The expansion across the entire frequency range and the extension of layering unfold subtly and effortlessly, rather than being overtly or aggressively imposed.
Moving on to the third track, the immediate sense of increased spaciousness was palpable. The soundstage became wider and deeper, and the background noticeably cleaner. These improvements are undoubtedly attributable to Entreq’s meticulous efforts in every small detail, as mentioned earlier. Furthermore, when the vocals entered, the sense of outstanding airiness was particularly striking.
On Russell Watson’s “That’s Life” from his album “The Voice” (Decca 4758532), the singer’s articulation was more distinct and realistic. When he hit high notes, they sounded more resonant and bright without becoming sharp. Although the singer’s image was clearer, it seemed to integrate better with the music as a whole.
Finally, listening to the string version of Simax’s “Bach: Goldberg Variations” (PSC1353), the violin notes were more delicate, turning gracefully and expressively. The accompanying viola sounded significantly smoother and more lyrical. Their harmony together was simply breathtaking. Listening to it, one’s mood settles with the music, allowing for quiet enjoyment.
After switching to the Challenger 3V Infinity, the sound felt like a piece of music meticulously polished by a seasoned master craftsman, with a surface utterly devoid of flaws—perfectly smooth and flat.
Veni Vidi Vici
The “3V” in Challenger 3V Infinity stands for VENI VIDI VICI—Latin for “I came, I saw, I conquered.” These were the words Caesar wrote to the Senate as a report of his swift victory over Pharnaces II of Pontus at the Battle of Zela.
As a flagship model within the Entreq cable lineup, only the Challenger series currently carries this “3V” designation, highlighting its significance and representativeness. Having listened to it, I am not only deeply moved by the Challenger 3V Infinity’s sonic performance but am also wholeheartedly conquered by it.
* **Product:** Power cable
* **Entreq Asia (Chinese Website):** [Website Address would go here if provided]
* **Importer/Agent:** Yusheng (04-2241-8066)