Jamo C705PA MKII Review_1
|

Jamo C705PA MKII Review


I believe design-conscious buyers will absolutely love the styling and texture of the Jamo C705PA MKII. The fabric chosen for the magnetic grille is particularly beautiful, elevating the overall aesthetic of these speakers. At first glance, they look like a pair of charming European-style speakers—seemingly traditional, but actually designed with every modern lifestyle consideration in mind to serve as a true active audio system.

In recent years, the trend in urban housing has leaned toward smaller households and compact floor plans, where space for audio equipment is highly limited. The design of these speakers is not aimed at hardcore audiophiles who obsess over matching sources with amplifiers or selecting premium cables. Instead, they target the most fundamental demand in the audio market: the desire to replace both the soundbar and the standalone Bluetooth speaker in one go.

Connectivity and Design

To replace those two categories, having Bluetooth connectivity and HDMI ARC is essential. The C705PA MKII places all the circuitry in the active right channel, while the left speaker is a traditional passive two-way speaker driven via speaker terminals from the right channel.

Digital inputs include HDMI ARC (supporting eARC), USB-C (USB Audio), and Toslink optical. Wireless Bluetooth transmission supports aptX, aptX HD, AAC, and SBC codecs. For analog connectivity, it provides a two-channel analog input and a dedicated subwoofer output terminal.

Smart Bass Management

The C705PA MKII not only allows you to connect an active subwoofer to form a “2.1-channel” system, but it does so in an incredibly smart way. In typical two-channel systems, adding a subwoofer is often a headache for users due to the lack of proper bass management. When users manually adjust the subwoofer’s crossover point, they often make the mistake of overlapping too many frequencies between the main speakers and the subwoofer.

This accumulated energy in the overlapping region results in an artificial, boomy bloat.

The C705PA MKII elegantly solves this. The moment you connect a subwoofer cable, it automatically enters “2.1 MODE.” In this mode, it implements active bass management, applying a 150 Hz high-pass filter to the C705PA MKII speakers themselves and a 150 Hz low-pass filter to the external subwoofer output.

As a result, users do not need to worry about adjusting crossover points at all. You simply adjust the subwoofer’s volume to your taste (which can be done via remote control). This makes it incredibly user-friendly, even for non-audiophiles.

Here, I would like to highlight three key tips when adding a subwoofer. First, the subwoofer you pair with this system must have a maximum crossover frequency higher than 150 Hz, or feature a bypass option. When setting up, adjust the subwoofer’s crossover dial to its maximum value (or use bypass) to ensure a seamless low-frequency transition between the C705PA MKII and the subwoofer.

Second is placement. Because the crossover point is set above 100 Hz, some of the low frequencies output by the subwoofer will have a slight sense of directionality. Therefore, it is highly recommended to place the subwoofer somewhere between the left and right speakers.

Third is budget: I suggest pairing it with a compact, budget-friendly subwoofer priced under $310 (NTD 10,000) that offers decent speed, such as those from Klipsch.

Proprietary Driver Technologies

The C705PA MKII incorporates several proprietary technologies developed by Jamo. Surrounding the 1-inch woven fiber soft-dome tweeter is a slightly concave ring structure, which is their ADW (Anti-Diffraction Waveguide). When the soft-dome diaphragm vibrates to produce high frequencies, the vibration is closer to the outer edge (the voice coil assembly) where wavelengths are short.

Diffraction typically causes sound waves to bounce off the front baffle, interfering with the soundstage and imaging. The ADW solves this by “correcting” the high-frequency waves at their source, dispersing them evenly forward. This improves imaging and off-axis response, allowing listeners sitting away from the sweet spot to enjoy beautifully extended highs.

Another unique technology is TDR (Tweeter Distortion Reduction). This features a high-damping rubber suspension ring placed between the tweeter and the front baffle. This ring effectively isolates the tweeter from the mechanical vibrations generated in the cabinet by the mid-bass driver.

The C705PA MKII is equipped with Jamo’s proprietary 4-inch HCCC (Hybrid Composition Conical Cone) mid-bass driver. The cone composition resembles a bulletproof vest made of synthetic fiber on the outer layer, with high-density coniferous wood fiber on the inside.

The former enhances cone rigidity, while the latter provides high damping. By combining the strengths of both materials, the driver achieves excellent speed and a warm tonal character. Additionally, a fixed aluminum phase plug is positioned at the center of the cone to ensure even dispersion of the midrange frequencies from 1 kHz up to the crossover point, smoothing out the frequency response.

Setup and Positioning

Given their compact size, these speakers are perfect for desktop use paired with a computer. I tested the USB-C input and confirmed it supports high-resolution audio up to 192kHz/32-bit, while Bluetooth is best enjoyed using the high-quality aptX HD codec.

Pairing these speakers with a smart TV in the living room is one of its primary use cases, and in my opinion, the best application. When using HDMI ARC, the TV’s audio output must be set to 2-channel PCM. In my setup using a Sony Bravia TV, I used a third-party mobile app (such as mConnect) to cast audio via UPnP.

I tested various Hi-Res music files, and formats at 192kHz/24-bit, 96kHz, and 88.2kHz all played back flawlessly at their native sample rates through the HDMI ARC digital output. Therefore, even though the C705PA MKII lacks built-in streaming capabilities, users can easily use their “smartphone + TV” combo as a network transport to enjoy lossless streaming.

According to the user manual, the recommended placement follows an “equilateral triangle setup”: a distance of 2 meters between the listening position and the speakers, and 2 meters between the speakers themselves, placed close to the wall with no toe-in. I followed these guidelines closely, placing them about 20 cm from the back wall, but adjusted them with a slight toe-in of about 5 degrees to tighten the center imaging during my audition.

Placing these speakers close to the wall is absolutely crucial. During my initial listen, they were about 90 cm away from the back wall, and the performance felt somewhat mediocre. Once I brought them in to just 20 cm, I instantly understood that this is exactly how they were designed to be used. Utilizing the boundary gain of the wall, the bass presence and low-end extension were filled out perfectly, without sounding bloated at all.

Another important detail is to keep the grilles on. I initially auditioned them without the grilles, and even with no toe-in, the treble felt a bit too forward, casting a shadow over the midrange. However, the moment I snapped the magnetic grilles on, everything fell into place. The balance was vastly improved, particularly in the transition between the mids and highs. Vocals became fleshier and fuller, and sibilance transformed from being distracting to sounding completely natural.

Listening Impressions

With this setup, I unlocked the true potential of the C705PA MKII. The sound signature is clearly “midrange-centric,” offering a steady, mature presentation that captures the emotional resonance of the music, especially with classical pieces.

Listening to Bill Evans’ live performance of *My Foolish Heart*, I was impressed that such an affordable, multi-functional active speaker could render classic jazz so convincingly. While playing Alice Sara Ott’s *Field: Complete Nocturnes*, the piano timbre showed wonderful completeness and beauty. Tsuyoshi Yamamoto’s *Live at Body & Soul* also delivered a satisfying sense of space and live-performance detail.

While the setups mentioned above prioritize musicality and warmth, these speakers also feature basic three-band EQ controls (Bass, Mid, Treble). If you prefer a more mature, British-style sound signature, you can toggle the Treble switch to -3dB to dial back the highs, which makes the midrange sound thicker. Conversely, if you listen to pop music and want a bit more high-frequency sparkle, you don’t even need to remove the grilles; just boost the Treble to +3dB, and it strikes a perfect balance.

Soundbar Alternative

These speakers are incredibly easy to enjoy for non-audiophiles. Nowadays, many people buy soundbars simply because they want to improve their TV’s audio. While that is easy enough to achieve, when it comes to playing music, even premium soundbars priced over $1,560 (NTD 50,000) are only mediocre, and we all know what to expect from the musical performance of a soundbar priced around $625 (NTD 20,000).

This is precisely where the C705PA MKII shines: addressing the exact weakness (sound quality) of soundbars in its price range. Admittedly, it does not offer surround sound processing, and with 45 watts per channel and 85dB sensitivity, it falls into the “moderate sound pressure” category. However, in modern urban apartments, no one is looking to shake the walls; raising the volume even slightly might result in a knock on the door from neighbors.

At reasonable listening volumes, these speakers make it easy to hear all the essential details of the recording. Setting them up in an equilateral triangle with little-to-no toe-in yields a surprisingly wide soundstage, offering great front-to-side imaging and immersion. Adding an active subwoofer will effectively add weight to movie sound effects and slightly boost the maximum clean output levels.

In my opinion, the Jamo C705PA MKII is a versatile audio solution for urban apartments. It can serve as a personal desktop system for computers and smartphones in the bedroom, or act as a TV companion in the living room, offering an “audiophile-first” alternative to conventional soundbars. If you are unsatisfied with the sound quality of budget soundbars and are working with a tight budget, the Jamo C705PA MKII is an exceptionally smart and logical choice.

Specifications

* Type: 2-way active bookshelf speakers
* Enclosure Type: Bass reflex
* Drivers: 1 x 1-inch woven fiber soft-dome tweeter, 1 x 4-inch HCCC mid-bass driver
* Frequency Response: 55Hz – 20kHz (±3dB)
* Crossover Frequency: 2kHz
* Sensitivity: 85dB (2.83V/1m)
* Built-in Amplifier Output: Class D, 45W × 2
* Digital Inputs: Optical, USB Type-C, HDMI ARC
* Analog Inputs: RCA
* Bluetooth Version: Bluetooth 5.0 (supports aptX, aptX HD, AAC, SBC)
* Subwoofer Output: RCA × 1 (20Hz–200Hz)
* Weight: 8 kg (total for both speakers)
* Dimensions (H x W x D): 265 x 160 x 205 mm