Kondo Kagura Vacuum Tube Power Amplifier image

Kondo Kagura Vacuum Tube Power Amplifier Review


Is it too exaggerated to describe Kondo Kagura as “a rare sound in a lifetime”? Not at all. If you have the fortune to hear it, I believe you would share my view.

However, hearing such a sound again might not be easy. Not only is Kondo extremely expensive and rare, but this Kagura flagship power amplifier is even more so. Moreover, Mr. Wen, the head of the distributor Quan Mao Company, rarely participates in audio exhibitions, making it difficult to hear Kondo at such events. Additionally, the source and speakers used in this listening session are top-notch products from HiFiReport’s audio dealership, with a total value exceeding tens of millions of NTD (approximately 300,000 USD). When such a high-priced combination will be encountered again, I am not sure myself. I can only be grateful that my role as an audio reviewer gave me the opportunity to hear this otherworldly music.

Single-Ended Parallel with High Power

Reflecting on the last time I heard Kondo, it was actually 7 years ago.

Ongaku is a single-ended stereo model, with each Ongaku equipped with two 211 power tubes, providing 27 watts of output power per channel.

Kondo Kagura Vacuum Tube Power Amplifier Review

The flagship Kagura is a product of another level.

Kagura adopts a monaural configuration, with each channel equipped with two 211 power tubes, using a single-ended parallel method, capable of outputting 50 watts of power.

Looking at Kondo’s products, it can be found that Kondo power amplifiers only use directly heated triodes, such as 211, 300B, and 2A3, and do not use the more common and higher power tetrodes or pentodes.

This choice clearly seeks the beautiful tone of directly heated triodes. However, as everyone knows, the output of directly heated triodes is not high, even 211 is only about 20 watts. Unless the speaker efficiency is particularly good, the wattage of directly heated triode single-ended machines is not very practical, and the choice of speakers is more restricted.

Kondo’s solution is single-ended parallel amplification, where two 211 tubes are paralleled for output, achieving the advantages of a single-ended circuit’s simplicity, full-wave amplification, low distortion, and pure tone, while doubling the power, greatly enhancing practicality, and avoiding the crossover distortion that push-pull might have.

Kondo Kagura Vacuum Tube Power Amplifier Review

However, I do not intend to compare the advantages and disadvantages of single-ended, push-pull, and single-ended parallel amplification methods here, as each method has its pros and cons, and each manufacturer has its unique design approach. Every amplifier also has its cost and price range considerations. Therefore, as long as the design can bring out the advantages of the circuit, it is a good design.

Consider this: among Kondo’s current six power amplifiers, only one is single-ended, one is push-pull, and the other four all use single-ended parallel. This shows that single-ended parallel is Kondo’s forte and one of the methods they consider the best.

Kondo has accumulated profound experience in single-ended parallel over the years, combined with newly developed technology and without any budget constraints, resulting in this Kagura masterpiece power amplifier.

This is an internal photo of Kagura, where all components are inverted, suspended under the copper top cover, with an extremely neat component layout.

Innovative Cut-Core Choke

Kagura doesn’t look particularly large in size, but its weight is astonishing, with each unit weighing 62 kilograms.

Kondo Kagura Vacuum Tube Power Amplifier Review

Perhaps many high-end power amplifiers on the market weigh no less than this, but you have to think, two units weigh as much as 124 kilograms, and Kagura is only 50 watts.

The main weight naturally comes from the transformers, including the multiple power transformers on top, the output transformers wound with pure silver wire, and four chokes.

The main purpose of the chokes is power filtering. These four chokes are for +/-200V, +450V, and +950V, followed by oil capacitors with a voltage rating of 1000V, which can operate three power systems and provide ample high-quality power.

Notably, Kagura’s chokes are not traditional EI-type coils but newly developed Cut-Core chokes. According to Kondo, this newly developed Cut-Core choke significantly enhances the sound, marking a major technological advancement.

Additionally, Kagura is equipped with newly developed silver foil capacitors, which greatly help improve sound quality density.

Kagura’s signal amplification uses one 12AU7, followed by two 6SN7 cathode followers as the driver stage to drive the 211 power tubes.

Kondo Kagura Vacuum Tube Power Amplifier Review

The rectifier tubes are four GZ34s.

Each circuit has an independent power supply and a complete filtering circuit, allowing Kagura to obtain the cleanest power with the lowest ripple and impedance.

Furthermore, from the clear unboxing photos provided by the manufacturer, it can be seen that Kagura’s internal circuit layout is constructed like a multi-story parking lot, with layered and sequential layouts, not only neat but also ingeniously designed.

Near the panel are the signal and voltage amplification stages, followed by the 211 tube power amplification stage, and then the power supply, chokes, oil capacitors, and other components. According to information on Kondo’s website, the arrangement between Kagura’s stages is extremely dense, and through three-dimensional layout and meticulous hand assembly, each component can be placed very close, achieving the shortest transmission path.

All the aforementioned components are mounted on Kondo’s customary heavy copper plates (or suspended below the copper plates), providing stability and excellent isolation.

Kondo Kagura Vacuum Tube Power Amplifier Review

This is the circuit of the input stage, voltage amplification stage, and driver stage, with a three-dimensional structure that shortens the signal path.

This is the circuit of the power amplification part, with the silver round thing below being the 211 tube socket.

Looking at it upside down, you can understand.

Output Transformer Wound with Pure Silver Wire

Why are Kondo products so expensive? One important reason is that almost all components are handmade, and a large amount of silver is used, including resistors, capacitors, and of course, the most crucial component of tube amplifiers — the output transformer, which is also wound with pure silver wire.

Kagura’s pure silver output transformer provides three output impedances: 4 ohms, 8 ohms, and 16 ohms. However, since the back panel can only accommodate two sets of speaker terminals, it is set to 4 ohms and 8 ohms at the factory.

Kondo Kagura Vacuum Tube Power Amplifier Review

Interestingly, each channel of Kagura has two power sockets on the back, meaning one unit requires two power cords, and two units require four.

This is because Kagura separates the main power and heater power inputs, primarily for isolation to avoid mutual interference from noise.

Each set of Kagura comes with four ACz-AVOCADO power cords provided by the manufacturer, so the only concern is whether there are enough sockets at home.

Additionally, Kagura only provides one set of RCA inputs on the back, which is easy to understand. Since it is a pure Class A single-ended parallel machine, there is no need for balanced inputs.

The listening session was conducted in the listening room of HiFiReport Audio in Neihu, Taipei. The equipment paired that day was all top-tier, on par with Kagura, including the Orpheus Heritage CD/SACD transport and DAC as the source, Kondo’s own G-1000 power-separated flagship preamplifier, and Kharma Exquisite speakers.

Kondo Kagura Vacuum Tube Power Amplifier Review

On the left of the picture is Kondo’s newly developed silver foil capacitor.

On the right are four chokes. These chokes are not traditional EI-type coils but newly developed Cut-Core chokes. According to Kondo, the new chokes significantly enhance the sound, marking a major technological advancement.

The output transformer, crucial to tube amplifiers, is wound with pure silver wire in Kagura.

Ethereal Elegance

The PMC test disc “Closing the loop” was first played. From the first track, Shammi Pithia’s world music-styled “Pacifist,” one can get a glimpse of Kagura’s overall performance: restrained, delicate, fine, gentle, and with astonishing detail.

Kagura’s background is extremely pure, with a pitch-black sound base. Its cleanliness is genuine, not achieved by excessive filtering or other unnatural methods that cut certain information. Therefore, I can hear very complete and rich reverberations, spatial echoes, and effortless extensions at both ends through Kagura.

Kondo Kagura Vacuum Tube Power Amplifier Review

After the prelude of “Pacifist,” there is a powerful drum sound and massive low frequencies. Kagura’s handling of low frequencies seems more restrained or elegant, emphasizing the shape, contour, positioning, and lines of the low frequencies rather than the volume.

Playing the second track, “The lone forest maiden,” left me speechless with surprise. It felt like I was hearing ethereal elegance.

This piece is a piano solo. Through Kagura’s playback, the piano sound is very smooth, with excellent singing quality. More captivating is the crystal-clear and transparent tone, rich in moisture and texture, yet not at all ostentatious. Everything seems just right, making me feel refreshed and relaxed.

I know this is the tone of tube amplifiers, especially the feeling unique to single-ended directly heated triode machines. But Kagura brings out this characteristic more beautifully and attractively, while also providing more practical power.

The third track, “Arriving,” continues to showcase Kagura’s ethereal tone to the fullest.

The soft, fine sound of the trumpet’s breath is extremely gentle and precise in positioning and contour. The piano’s reverberations are astonishingly abundant, with clear and long-lasting echoes, clearly depicting the recording space’s appearance. Additionally, Kagura allows the Exquisite speakers’ diamond tweeters to fully perform, with high frequencies spreading unobstructed. The piano’s tone is bright, filled with gentle radiance, while also maintaining the strength and density of the piano’s keystrokes. I think only when Kagura meets Kharma can such a tone be achieved!

Kondo Kagura Vacuum Tube Power Amplifier Review

The Violin Tone is Simply Beautiful

Next, I played violinist Dora Schwarzberg’s collaboration with Argerich, performing violin sonatas by Franck, Debussy, and Schumann.

The first four tracks are Franck’s Violin Sonata in A Major. The melody at the beginning of the first movement is very slow, with a small volume and a soft, long voice line, but not lacking in strong and passionate passages, with deep and vivid contrasts. The second movement starts with strong piano chords and rapid note groups, with the violin turning and climaxing, very exciting.

Through Kagura and Exquisite’s playback, the violin tone is simply beautiful! The changes in the bow and string are numerous and clear, not lacking in strength and tension, giving me a dreamlike, unreal feeling. Yet, the tone is rich in texture and detail, as if someone is really playing in front of me.

Surprisingly, facing such large speakers, Kagura’s 50-watt output power shows full practicality, as I did not feel the music becoming dull or sluggish, but rather lively and light.

Kondo Kagura Vacuum Tube Power Amplifier Review

I don’t mean that Kagura uses 50 watts to handle Exquisite, but within the dynamic range required by the violin sonata arrangement, Kagura shows very smooth and natural contrasts, with clear and vivid changes in strength.

Take the “Dust of Time” movie soundtrack CD as an example.

The film is a work by Greek director Angelopoulos, with music composed by his frequent collaborator Eleni Karaindrou.

The main ensemble of the music is a small string orchestra, accompanied by piano, accordion, or wind instruments.

Through Kagura’s playback, the extremely gentle and moist tone, although it softens the sense of alienation, bitterness, and vicissitudes in the music, still retains the rich texture of bow and string friction. The soundstage is open and pure, without a sense of limitation.

Another impressive part is the latter half of the second track to the third track, where there are strings, bassoon, oboe, piano, accordion, and other instruments. The various instrument tones are presented, and the musical picture blooms in a colorful display, leaving one breathless.

Kondo Kagura Vacuum Tube Power Amplifier Review

A Goal Worth Pursuing for a Lifetime

Next, I expanded the ensemble size and switched to symphonic music, choosing the 2016 37th Taipei Audio and Art Exhibition commemorative CD, which includes recordings of the NSO conducted by Shao-Chia Lü at the National Concert Hall in Taipei.

Facing the Exquisite’s seven drivers and 500-watt power handling, Kagura’s dynamics are indeed delayed, unable to exhibit sharp dynamics. However, the soundstage separation, layering, and the sense of presence remain extremely excellent and impressive. More importantly, the entire soundstage’s foundation remains stable, with outstanding three-frequency structure and effortless upper and lower extension, without the regret of being stretched thin.

After listening for an entire afternoon, I finally understood why so many audiophiles are so fascinated by directly heated single-ended triode machines. The transparent and crystal-clear tone, delicate and lively musical expression, and subtle dynamic changes make the music highly captivating. Kagura, with its unique technology and disregard for cost, focusing only on sound performance, provides more practical driving power through single-ended parallel methods, allowing users to enjoy the beauty of music and various audio equipment without limitations.

Of course, Kagura is not an audio device that ordinary people can afford, but it is definitely a goal worth pursuing for a lifetime for those who appreciate it.

Equipment Specifications

  • Type: Single-ended parallel vacuum tube monaural power amplifier
  • Output Power: 50 watts @ 1kHz, 5% THD
  • Vacuum Tubes Used: 211×2, 6SN7×2, 12AU7×1, GZ34×4
  • Frequency Response: 8Hz – 42kHz (+0dB, -3dB @1W)
  • Input Impedance: 50kΩ (one set of RCA inputs)
  • Output: 4Ω, 8Ω (or 16Ω)
  • Dimensions: 320×370×558mm (W×H×D)
  • Weight: 62 kg