|

WiiM Amp Pro Multiroom Streaming Amplifier Review


Overview

The WiiM Amp Pro is a mid-range all-in-one streaming amplifier that takes the blueprint of the original WiiM Amp and rebuilds it from the inside out with a higher-grade DAC chip, upgraded Class-D amplifier technology, improved wireless performance, and Dolby Audio decoding — all in the same compact aluminum chassis, at a price that still sits well below any competing product with equivalent measured performance. It delivers 60 watts per channel into 8-ohm speakers and 120 watts per channel into 4-ohm loads, while streaming hi-res 24-bit/192kHz audio from every major service and integrating with your TV via HDMI ARC. For anyone building a passive speaker system without a dedicated hi-fi rack and without a Bluesound or Sonos budget, the Amp Pro is among the strongest arguments available in the market today.

The original WiiM Amp caused a genuine stir when it launched: a fully featured streaming amplifier with HDMI ARC, Google Cast, and AirPlay 2 at a price the established brands could not match. The Amp Pro follows it with a clear performance brief — upgrade the audio hardware, push the wireless reliability further, and add Dolby decoding for better TV audio — while keeping the same physical design and near-identical connectivity. The result is an amplifier whose measured SINAD (signal-to-noise and distortion combined, where higher is cleaner) at typical listening levels reaches approximately 100dB in independent community testing: a figure that places it in the transparent tier for an amplifier of its type, ahead of entry-level AVRs and comparable with or better than competing streaming amplifiers that cost considerably more. Frieve Audio Review’s 2025 comparative analysis found no competing streaming amplifier with HDMI ARC, multiroom, room correction, and a comparable measured performance could be had for less — not the Bluesound Powernode Edge, not the Sonos Amp, both of which carry significantly higher asking prices.

There is one significant caveat, and it is not subtle: the WiiM Amp Pro does not support AirPlay. This is a deliberate design decision shared across WiiM’s current premium product generation, and it is confirmed to be a permanent architectural choice rather than something addressable by firmware. The original WiiM Amp does support AirPlay 2, making the choice between the two models a genuine fork in the road for Apple ecosystem households. This review addresses that fork directly and gives clear guidance on which buyer profile belongs on which side of it. For everyone else, the Amp Pro’s combination of audio performance, protocol depth, and competitive pricing represents one of the best-value streaming amplifiers available.

This review examines the Amp Pro across six dimensions: its DAC and amplifier technology, build quality and physical design, measured and perceived audio performance, real-world use cases, user feedback, and a precise verdict on the Amp vs. Amp Pro decision and where the Amp Pro sits in the broader streaming amplifier market.


Key Features & Tech Specs Explained

ESS ES9038Q2M SABRE DAC: A Meaningful Step Forward

The WiiM Amp Pro uses an ESS ES9038Q2M DAC chip — a 32-bit, 384kHz-capable converter from ESS Technology’s SABRE family that sits one step below the ES9039Q2M used in the Amp Ultra. The manufacturer specifies SNR of 120dB (A-weighted) and THD+N of -105dB at 5 watts — figures that comfortably exceed the thresholds commonly used to define audible transparency in amplifier reviews. In practical terms, 120dB SNR means the noise floor sits well below the quietest detail in any recording, and -105dB THD+N means distortion products are more than 178,000 times below the signal level. Independent community measurements from the Audio Science Review forum confirmed approximately 100dB SINAD in real-world testing — consistent with the manufacturer’s figures and placing the Amp Pro in the transparent performance class for its type.

The upgrade from the original WiiM Amp is meaningful in measured terms. Audio Advice describes the Amp Pro’s redesigned circuitry as producing a “notably lower noise floor, with lower distortion and better clarity and detail” compared to the first-generation model — an improvement validated by published third-party measurements that show the original Amp sitting lower in the SINAD rankings than the Pro. The practical benefit is a quieter, cleaner background between musical notes — the kind of improvement that becomes most noticeable on complex acoustic recordings or at lower listening volumes where the noise floor becomes audible if it is not well-controlled.

TI TPA3255 with PFFB: Reliable Power Under Real Loads

Like the Amp Ultra, the Amp Pro uses a Texas Instruments TPA3255 Class-D amplifier chip with Post-Filter Feedback. Class-D operates like a very fast electronic switch — pulsing power thousands of times per second and converting it to audio with high efficiency, typically 85-90%, which is why the chassis stays cool without a fan even at elevated volumes. PFFB (Post-Filter Feedback) adds a correction loop that measures the output after the filter stage and feeds an error signal back into the amplifier — keeping the frequency response flat and consistent regardless of how the connected speaker’s impedance changes with frequency. This is the same technology validated in the Amp Ultra’s independent testing, where reactive speaker-load testing showed frequency response deviation of no more than 0.10dB. The result in real-world use is an amplifier that behaves consistently with the wide variety of passive speaker types it is likely to encounter.

The rated output is 60 watts per channel into 8 ohms and 120 watts per channel into 4 ohms — sufficient for the majority of bookshelf and moderate-sized floorstanding speakers in small to medium rooms. Users considering very large rooms or notably power-hungry speakers — those rated below 84dB sensitivity and presenting difficult impedance loads — should factor in the Amp Ultra’s higher power rating of 100W/8Ω and 200W/4Ω as a potential upgrade path.

HDMI ARC with Dolby Audio: TV Integration That Competing Products Charge a Premium For

The Amp Pro includes an HDMI ARC (Audio Return Channel) input that allows a compatible television to send its audio output back through the HDMI cable to the amplifier — routing TV sound through your passive speakers without a separate audio cable. Dolby Audio decoding handles multi-channel surround soundtracks from streaming services and Blu-ray, folding them down to stereo with proper channel management rather than a simple mix. This combination — an HDMI ARC input plus real-time Dolby decoding in an amplifier at this price — is a feature configuration that Frieve Audio Review noted is absent from any competing streaming amplifier at a lower price point. The Bluesound Powernode Edge and Sonos Amp both offer HDMI eARC (an enhanced version of ARC), but both carry asking prices that are substantially higher. For users whose primary source is a television alongside a music streaming setup, the Amp Pro’s HDMI ARC port transforms it from a dedicated music device into a viable single-component living room solution.

Streaming Protocol Stack: Comprehensive, with One Notable Gap

The WiiM Amp Pro supports Google Cast (Chromecast built-in), Spotify Connect, TIDAL Connect, Qobuz Connect, Amazon Music via Alexa Cast, DLNA/UPnP for local network libraries, Bluetooth 5.3, and Roon. The WiiM Home app integrates natively with Amazon Music, TIDAL, Deezer, TuneIn, iHeartRadio, Qobuz, and dozens of additional services. Wi-Fi 6 (dual antenna) and Ethernet both provide network access — Wi-Fi 6 delivers improved reliability and throughput over the 802.11ac Wi-Fi found in the original Amp, particularly in multi-device home networks. The included Voice Remote gives hands-free Alexa control and preset recall without a separate smart speaker in the room.

The absent protocol is AirPlay. New generations of WiiM products have dropped AirPlay support, which will be a significant limitation for dedicated Apple Music and iOS subscribers. WiiM has not disclosed the reason for the Amp Pro’s lack of AirPlay, and it is confirmed to be an omission that cannot be fixed with a firmware update. For Apple Music users, the only wireless path to the Amp Pro is Bluetooth, which operates at lower quality than the Wi-Fi streaming paths. The older WiiM Amp retains AirPlay 2 and remains available for users who need it. This distinction is worth naming clearly: it is the primary reason a potential buyer might choose the original Amp over the Pro, and Digital Trends’ reviewer described it as the key fork in the purchase decision. For all other streaming services and for households not reliant on AirPlay, the Amp Pro’s streaming implementation is excellent.


Build Quality & Design

The WiiM Amp Pro shares its physical chassis with the original WiiM Amp — a flat aluminum enclosure measuring 217 by 190 by 66 millimeters, finished in space gray. The aluminum construction is solid and well-machined, with a low-profile footprint that disappears on a shelf or in a TV cabinet. Simple Home Cinema describes the build as “a sleek aluminum shell, offering a compact and modern aesthetic” with a “tactile feel” that distinguishes it from the touch-surface-only Amp Ultra. The front panel rotary dial controls volume and playback, and a row of white LEDs indicates volume level — a functional display that several reviewers have described as practical and accurate, if less visually refined than a touchscreen. A thoughtful thermal design with a custom heatsink dissipates heat efficiently; reviewers and users consistently report the Amp Pro running warm but not hot even during extended playback at higher volumes.

The rear panel follows the same generous connectivity layout as the original Amp: speaker binding posts (five-way, accepting banana plugs and bare wire), HDMI ARC, optical S/PDIF input, stereo RCA inputs, subwoofer output on RCA, USB-A for media playback, and Ethernet alongside the dual Wi-Fi antennas. One noted limitation versus the Amp Ultra is the single pair of RCA analog inputs — users who need multiple analog sources connected simultaneously will need a separate input selector or a more capable device. There is no headphone jack on the Amp Pro; Bluetooth can be selected as the audio output for wireless headphone use.

The accessory bundle is comprehensive: a Voice Remote, HDMI cable, stereo RCA cable, optical cable, and power cord are all included. What Hi-Fi? found setup via both Wi-Fi and Ethernet to be stable and easy. The overall physical impression is a purposeful, no-frills component whose budget is clearly allocated to internal audio hardware rather than cosmetic premium materials — a trade-off consistent with WiiM’s engineering philosophy across the product line.


Sound / Performance

Independent community measurements from the Audio Science Review forum place the WiiM Amp Pro’s SINAD at approximately 100dB at 5 watts — a result that Frieve Audio Review describes as representing audible transparency in normal listening conditions, with distortion rising at very high frequencies and near full power but remaining well-controlled within the levels where real-world music listening actually occurs. This is a meaningfully better result than the original WiiM Amp and positions the Amp Pro comfortably ahead of entry-level AV receivers in measured audio quality. Manufacturer specifications of 120dB SNR (A-weighted) and -105dB THD+N at 5 watts are consistent with the community measurement findings.

The Amp Pro’s sound is warm, lively, and forward, which works beautifully for genres such as pop, electronic, and jazz. What Hi-Fi? — which had previously criticized the original Amp for falling short in sound quality — found the Pro a meaningful step in the right direction: cleaner, more detailed, and more engaging across a range of musical material. The ESS ES9038Q2M DAC’s contribution is most audible in the cleanliness of the background between notes and in the resolution of fine detail in complex arrangements — areas where the improved noise floor and lower distortion make a cumulative difference over extended listening. Multiple reviewers noted that the Amp Pro is best evaluated at realistic listening volumes rather than at maximum output, where, as with any amplifier, distortion rises as the output stage approaches its limits. Source: hifireport.com © HiFiReport, all rights reserved.

The room correction system, accessed through the WiiM Home app, uses the smartphone microphone to measure the room’s acoustic characteristics and generate a compensating EQ profile. Multiple users describe the calibrated result as a clear improvement over the default setting, with Audio Advice customers specifically noting tighter, better-controlled bass after running the correction. The 10-band parametric EQ enables further manual refinement. Dolby Audio decoding improves TV audio materially compared to the PCM stereo downmix that most televisions would otherwise send — dialogue clarity and sound effect placement both benefit from proper multi-channel decoding before the stereo fold-down.


Real-World Use Cases

The WiiM Amp Pro’s most natural configuration is as the central component of a compact, single-room music and TV system built around a pair of passive bookshelf speakers. Connect the speakers, run one HDMI cable to the television, set up Wi-Fi or Ethernet, run room correction, and the Amp Pro handles everything from that point forward: hi-res streaming from every major service, TV audio with Dolby processing, subwoofer for bass extension, and voice control through Alexa or Google Assistant — all without a receiver, a separate streamer, a DAC, or a soundbar. One Audio Advice customer described exactly this configuration, connecting a NAS media server, a TV via Roku optical output to the optical input, and a subwoofer, and describing the result as substantially better than the basic amplifier it replaced. The DLNA capability for local library playback was specifically called out as the feature that made it the right choice over competing devices that did not handle network-attached storage reliably. Source: hifireport.com © HiFiReport, all rights reserved.

The Amp Pro also slots naturally into an existing WiiM multiroom ecosystem as the amplified zone — driving passive speakers in a primary or secondary room while WiiM streamers (Mini, Pro, Pro Plus) handle zones where powered speakers or a separate amplifier are already present. Google Cast groups and Alexa multi-room audio synchronize playback across all zones regardless of which WiiM device is in each room. The 12V trigger output (shared with the original Amp) supports automated subwoofer or amplifier power switching. Users who prioritize Google Cast ecosystem integration — with Google TV, Nest speakers, or Android-native casting — will find the Amp Pro integrates as seamlessly as any Google Cast device regardless of its audio tier.

For users considering the Amp Pro versus the Amp Ultra: the step up in the Ultra brings dual amplifier chips, the higher-spec ES9039Q2M DAC, a touchscreen, copper heat pipe cooling, and full 100W/200W power figures. The Amp Pro is the appropriate choice for small to medium rooms with moderately sensitive speakers where 60W/8Ω is sufficient; the Ultra is the better fit for larger rooms, more demanding speaker loads, and users who want the touchscreen as a daily control surface. Source: hifireference.com © HiFiReference, all rights reserved.


What Real Users Are Saying

Verified buyer feedback consistently describes the Amp Pro as exceeding expectations for its price tier — particularly in sound quality relative to the budget streaming amplifiers and basic AV receivers it typically replaces. Users who upgrade from entry-level integrated amplifiers or Bluetooth receivers describe the improvement as immediate and obvious: cleaner bass, more articulate midrange, and a sense of musical engagement that casual-use alternatives did not provide. The room correction feature is a recurring highlight: users who take the time to run calibration describe the result as transformative for suboptimal room placements, with one buyer describing it as making a “massive difference” to the perceived quality of bass and overall tonal balance.

The WiiM Home app receives consistent praise for its breadth of service integration — users with Qobuz, TIDAL, Amazon Music, and local NAS libraries describe managing all of them from within a single, logically organized interface without the friction of switching between apps or sources. The Voice Remote is appreciated as a practical addition, particularly for users who want Alexa voice access without a separate Echo device in the listening room. Setup speed is a recurring positive: most buyers describe going from box to music in under five minutes, with the Ethernet option being specifically noted for eliminating any Wi-Fi setup complications entirely.

The AirPlay absence is the most consistently noted limitation in user feedback, and it deserves the prominence it receives. iPhone-primary users who purchased without noticing the “no AirPlay” disclosure on the product page are the primary source of negative reviews; every other aspect of the product draws consistently positive responses. The community consensus is clear: if AirPlay is part of your daily listening workflow, the original WiiM Amp is the better fit. If it is not — and for the majority of users on Android, Google Cast-native platforms, or Spotify/TIDAL-centric workflows, it genuinely is not — the Amp Pro delivers meaningfully better audio performance for a modest premium, and the trade-off is straightforward.


Pros & Cons

Pros:

  • ESS ES9038Q2M SABRE DAC with PFFB-equipped TI TPA3255 amplifier achieves approximately 100dB SINAD at 5 watts in independent community measurements, placing it in the transparent performance class for streaming amplifiers — ahead of entry-level AV receivers and below any competing streaming amplifier with HDMI ARC at a lower price, based on third-party measurement findings.
  • HDMI ARC with Dolby Audio decoding enables full TV audio integration at a price point where no competing streaming amplifier with equivalent measured performance offers the same combination, based on Frieve Audio Review’s 2025 competitive survey.
  • Full streaming protocol support — Google Cast, Spotify Connect, TIDAL Connect, Qobuz Connect, DLNA, Roon, Alexa Cast — covers every major non-Apple platform natively, with a broad WiiM Home app service integration.
  • Wi-Fi 6 dual-antenna and Ethernet deliver improved wireless reliability over the original WiiM Amp, with lower latency and better performance in congested network environments, based on spec analysis.
  • Compact aluminum chassis with an efficient thermal design runs without fan noise at all listening levels, based on user and reviewer reports.
  • Voice Remote included in the box provides Alexa voice control and preset recall without requiring a separate smart speaker in the listening room.

Cons:

  • No AirPlay of any kind — this is a permanent architectural decision, not fixable by firmware; Apple Music users can only access the Amp Pro wirelessly via Bluetooth, which operates at lower quality than Wi-Fi streaming paths; the original WiiM Amp retains AirPlay 2 support, based on confirmed product documentation.
  • No touchscreen or display — the front panel uses a rotary dial and LED volume indicator, which is functional but lacks the visual feedback and direct touch control that the Amp Ultra and other premium streaming amplifiers offer.
  • Single pair of RCA analog inputs limits connection of multiple analog sources simultaneously; users with a turntable and an additional analog device will need an external input selector, based on spec analysis.
  • Power output of 60W per channel at 8 ohms is adequate for small to medium rooms with normally sensitive speakers, but users with large rooms or speakers below 84dB sensitivity may find the Amp Ultra’s higher power rating more appropriate, based on spec analysis.

Who Should Buy This?

The WiiM Amp Pro is the right choice for three converging buyer profiles. The first is the passive speaker owner who wants to add modern hi-res streaming, HDMI TV integration, and Dolby decoding to an existing pair of bookshelf or moderate floorstanding speakers, without assembling separate components or matching a Sonos or Bluesound budget. The Amp Pro’s measured audio performance is genuinely good, its streaming ecosystem is comprehensive, and nothing at a lower price offers the same combination of HDMI ARC and transparent amplifier performance. The second is the existing WiiM ecosystem user who wants an amplified zone with an upgraded DAC — someone already running a WiiM Pro or Pro Plus as a streaming transport who wants to consolidate streamer and amplifier into one device for a secondary or primary room.

The third profile is the buyer deciding between the Amp Pro and the original WiiM Amp. Digital Trends’ reviewer framed this clearly: for those who are not fussed about the lack of AirPlay, and who believe their speakers and ears could benefit from the Pro’s improved performance, the modest premium is a small price to pay for potentially better sound. If you use Spotify, TIDAL, Qobuz, Amazon Music, or Google Cast as your daily listening workflow, the Pro’s audio performance advantage is real and worth the additional outlay. If you use Apple Music via AirPlay, or if grouping with HomePods is important to your home audio setup, the original Amp is the more practical choice despite its older audio hardware.

Users who need more than 60W per channel — large rooms, inefficient speakers, demanding floorstanders — should look at the Amp Ultra. Users who want a headphone output should also step up to the Ultra or consider the WiiM Ultra streamer paired with a separate amplifier. For everyone whose speaker and room match the Amp Pro’s output capability and who operates outside Apple’s AirPlay ecosystem, it remains one of the most compelling streaming amplifiers available at any price.


Verdict

Overall score: 8.5/10 (Amplifier & DAC performance 50% / Features & ecosystem 20% / Build & design 15% / Value 15%)

The WiiM Amp Pro delivers on its central promise: better audio performance than the original WiiM Amp, in the same chassis, at a mid-range price that no competing product with equivalent measured quality and HDMI ARC can match. The ESS ES9038Q2M DAC and PFFB-equipped TPA3255 amplifier achieve approximately 100dB SINAD at listening levels — transparent performance that What Hi-Fi?, Digital Trends, and Frieve Audio Review all confirm in their assessments. The streaming protocol stack covers everything except AirPlay, the Dolby Audio decoding adds genuine value for TV audio users, and the room correction makes real acoustic improvements in the non-ideal placement positions that most real-world users actually use.

The AirPlay omission is real and non-negotiable. It is not a minor inconvenience to smooth over — it is a binary incompatibility that affects a large segment of potential buyers and should be confirmed before purchasing. With that fully understood, the Amp Pro occupies a genuinely useful and competitively positioned place in the market: the best-value streaming amplifier for non-Apple households, and a significant improvement over the device it builds upon.

Verdict: Strongly Recommended — for passive speaker owners and Google Cast/Alexa-centric households wanting hi-res streaming, HDMI ARC TV integration, and transparent amplifier performance in one compact component. Verify your AirPlay dependency before committing; if AirPlay is essential, the original WiiM Amp remains available and retains that capability.

WiiM Amp Pro Streaming Amplifier for TV, Music & Passive Speakers | Upgrade Your Favorite Passive Speakers with Wireless Streaming, Smart Control, and High-quality Sound.
  • Unleash Premium Sound: The WiiM Amp Pro is our most advanced streaming amplifier yet, featuring PFFB technology, Wi-Fi 6, an innovative thermal design, and a premium DAC for superior audio performance. It delivers 60W per channel power for 8 ohms, and 120W per channel power for 4 ohms. It incorporates the latest Wi-Fi 6 and BT 5.3 with two antennas, offering rock solid wireless audio streaming.
  • Does It All Like Magic: Master your audio universe with the WiiM Home App. Stream from top music services and manage your system effortlessly, room by room. Adjust volume, sync speakers, save favorites, set alarms, and tweak settings—all in one place. Prefer your go-to music app? No problem, play straight from it. Plus, go hands-free with voice commands. Whether you’re using Alexa, or Google Assistant, control is just a word away, even with the included voice remote.
  • Home Theater Magic, Simplified: Elevate your entertainment experience effortlessly with the WiiM Amp Pro’s HDMI ARC port. Plug in your TV and immerse yourself in rich stereo sound for shows, movies, and video games. Craving that extra oomph? Simply add a powered subwoofer to take your audio to cinematic levels. With minimal setup required, the WiiM Amp Pro offers a seamlessly integrated AV system that turns your living room into a home theater paradise.