_ Acoustic Signature WOW Review_16

Acoustic Signature WOW Turntable Review


It might come as a surprise that a German manufacturer can possess a sense of humor, directly naming their product WOW – a sound of amazement. The WOW turntable was created to allow those with a limited budget to experience top-tier German engineering. Acoustic Signature, established in 1996, specializes in producing vinyl turntables. With over 20 years of growth, refinement, and proprietary technology, they have become a renowned international brand.

Recently, they moved to a new 50,000 square foot (approximately 1,400+ ping) factory, where all products are manufactured in-house, ensuring the highest quality of craftsmanship.

The WOW turntable reviewed here is their entry-level model. Due to its popularity, Acoustic Signature subsequently launched the higher-end WOW XL and WOW XXL. The primary differences between the three lie in the plinth, platter, and motor, providing customers with more flexible choices based on their budget. The WOW is equipped with a Rega tonearm, a precise Tidorfolon bearing system, and a low-vibration, low-noise 24v Beta DIG motor.

The larger box contains the WOW turntable, while the smaller one holds Acoustic Signature’s Tango MK3 phono preamplifier – naturally, the ideal pairing.

Upon opening, you’ll find the turntable setup manual and necessary alignment tools. The tonearm is an OEM Rega RB 202, and the small package in the upper left is the drive belt.

This is the dedicated power supply for the turntable.

Here’s the WOW turntable itself. The tonearm is pre-installed at the factory. The WOW utilizes a high-density wooden plinth with a 3mm thick high-density acrylic top layer, creating a sandwich structure. The power switch and touch-sensitive controls for 33 and 45 RPM speeds are located on the lower left.

The underside of the turntable features three high-precision, height-adjustable metal cone feet. The WOW employs a brand-new digital motor, promising stable and convenient operation. Acoustic Signature believes a turntable motor should have sufficient power to accelerate the platter without affecting its rotation. After continuous research and experimentation, they found a European company whose synchronous motors offer the best performance.

These motors provide absolute stability during operation and are digitally controlled for reliability and ease of use.

The cone feet utilize a spiral design for vibration damping, with a flat base to prevent scratching the surface of your audio rack.

The platter is crafted from carefully selected aluminum, chosen for its excellent properties, and precision-manufactured in their own factory. The underside of the platter is coated with a high-damping material. It measures 24mm thick and weighs a substantial 4.5kg. This weighty platter, in conjunction with the Tidorfolon bearing system, ensures remarkably smooth turntable operation.

The bearing system is the heart of any vinyl turntable. Acoustic Signature has developed what they consider the ideal bearing system, boasting extremely low noise, minimal friction, and long-term stability. It’s meticulously machined from special stainless steel, while the bearing housing is made from sintered bronze, which inherently provides lubrication. This bearing system guarantees smooth operation and a tight coupling with the spindle.

The Tidorfolon bearing system is designed to be maintenance-free for life – a decade of use is certainly not an issue.

Install the aluminum sub-platter, applying a small amount of lubricant to the metal spindle tip before placement.

Attach the drive belt.

Use a spirit level to adjust the turntable’s horizontal level, remembering to check at various points.

Assembly is already more than 50% complete at this stage.

Next, we install the cartridge. We are using the Acoustic Signature MC1 cartridge, whose packaging is as exquisite as a jewelry box.

Acoustic Signature currently offers three cartridges, all starting with “MC” in their model names: MC1, MC2, and MC3, with higher numbers indicating higher tiers. For our review of the entry-level “WOW,” we naturally paired it with the MC1. The manufacturer describes it as delivering an open and dynamic sound with some warmth.

The MC2 offers even greater dynamics and resolution, more openness and detail, and a natural sound. The MC3 is designed for discerning audiophiles, capable of revealing every detail in a vinyl record, with rich sonics, an exceptionally wide soundstage, and the most natural and faithful reproduction.

Here’s a comparison chart of the specifications for the three cartridges.

Screws and an L-shaped Allen key for cartridge installation.

The MC1 cartridge body is made of aluminum. It has an output of 0.5mV and a recommended tracking force of 2.3g. The cartridge weighs 11g.

Mount the cartridge onto the tonearm.

Simply connect the four different colored signal wires according to the color codes on the cartridge.

After installation, use tools to adjust the cartridge alignment to ensure it’s parallel to the record grooves during playback. Then, adjust the tracking force using an electronic stylus force gauge according to the manufacturer’s instructions. Users can also fine-tune it to their preference after listening.

The Tango MK3 phono preamplifier.

It supports both MM and MC cartridges and offers a wide range of adjustable settings. MM gain reaches up to 40dB, and MC gain up to 67dB. It utilizes high-quality capacitors, with RIAA curve accuracy within 0.2dB, and includes a subsonic filter to eliminate frequencies below 6Hz.

Connect the signal cables, and you’re done.

The two switches are touch-sensitive; a light finger touch activates them. The speed selection button also serves as the power switch. When initially powered on or when switching speeds, the speed indicator light will blink, indicating that the platter speed is still stabilizing. It will become solid when the speed is stable.

Expansive Soundstage and Impressive Dynamics

Although the WOW is considered Acoustic Signature’s entry-level turntable, after two weeks of listening, it feels like a very accomplished piece of equipment. Its overall sonic performance belies its entry-level designation. Playing Chie Ayado’s , the vocals are remarkably clean and focused, exceptionally clear. Any decent turntable should be capable of clear reproduction, dispelling the notion that vinyl always produces a heavily colored sound.

The sound density is excellent, indicating the turntable and cartridge’s ability to extract ample signal information. For an entry-level turntable and cartridge combination, this level of performance is truly outstanding. With guitar and piano accompaniment, the soundstage becomes even more complete and precise, presenting an expansive sense of space. Even more impressively, the dynamic performance is remarkable.

Dynamics are often a weaker aspect in many entry-level turntables, but the WOW exceeded my expectations in this regard. With well-recorded and mastered records, it can reproduce satisfying dynamics and detail.

Natural, Clean, and Fluid

Jiang Hui’s retirement from live concerts is a loss for all fans. In the future, we can only experience her voice through recordings. This “Red Songs” album is pressed on clear crystal vinyl with very shallow grooves. While the low frequencies are slightly less prominent, the overall sound quality is excellent. The WOW delivers superb extension in the mid-high frequency range of Jiang Hui’s vocals.

In track two of side A, “Empty Dream,” her singing is bright and full of emotion, conveying the sense of worldly sorrow. It showcases Jiang Hui’s characteristic vocals – soaring yet never harsh. Track two of side B, “Drifting in the Wind and Rain,” written and composed by Wu Bai, is very familiar to me. Wu Bai’s rendition carries a heavier sense of melancholy and reverie, while Jiang Hui’s version is more tender and heart-wrenching, like being pelted by cold, fine rain.

The entire album sounds very natural, clean, and fluid. The sound is appropriately gentle when needed and powerful when called for, allowing the WOW to reproduce music with great engagement and emotion.

Balanced Across the Frequency Spectrum

Eagles’ features richer soundscapes and more instrumental textures compared to the previous two albums, yet the musical presentation is remarkably organized and coherent, with a very balanced frequency response across the entire spectrum without any noticeable bias. During playback, I could feel the excitement of the live audience. The applause and cheering felt very natural – a unique sense of realism that vinyl records offer.

In “Wasted Time,” I experienced the lead singer’s warm and weathered vocals, the weighty piano chords, the lonesome electric guitar, and the remorseful kick drum – these elements seemed to convey a deeper emotional expression and release compared to CD playback, reaching deeper into the listener’s heart. Perhaps this is the most captivating aspect of vinyl records.

German Excellence Shines, Even at Entry-Level

During my time with the WOW, I listened to record after record. The WOW consistently and competently conveyed the emotional essence of each record. Even as their entry-level model, you can sense the meticulous German engineering in every aspect. The build quality and tactile feel are excellent. Highly recommended!

Acoustic Signature WOW Turntable Specifications

* Drive System: Synchronous motor, BETA-Dig electronic monitoring sine wave regeneration power supply
* Bearing: High-precision TIDORFOLON bearing
* Plinth: Acrylic top panel and 30mm high-quality MDF plinth, with height-adjustable feet
* Platter: 24mm thick high-precision machined aluminum platter, weighing 4kg
* Speed Range: Electronically monitored speed selection for 33 1/3 RPM or 45 RPM
* Dimensions: 430 x 119 x 340 mm (Width x Height x Depth)
* Weight: Approximately 10 kg