BenQ treVolo A
|

BenQ treVolo A Review


One evening after work, just as I was about to drive out of the parking lot, my phone rang.

“Who could be calling at this hour?” I answered the phone, “Hi, Mr. Dai, this is Karl.” A familiar voice came through the phone – it was BenQ’s manager Karl Wang.

“When are you free? I’d like to bring some equipment over for you to listen to.” Wow, could it be that one? “This time we’d like you to review the treVolo A.” Wow, it really is!

So we arranged to meet the next morning, with Karl personally delivering it. However, this story’s thread goes back further.

I first learned about BenQ’s release of the treVolo A all-in-one audio system at the end of last year. BenQ’s latest all-in-one audio system, the treVolo A, comes with rich input interfaces, making it much more than just a Bluetooth speaker.

One Monday, as the editorial department routinely assigned new product news to each editor, I was allocated a piece of equipment. As I carefully read through the manufacturer’s brief, I became increasingly excited, writing while wondering when I could see it in person and hear its sound.

That was the BenQ treVolo A.

BenQ treVolo A Review

Why was I so excited? Because this was the first all-in-one audio system to feature ceramic tweeters and Class A amplification. While there were many similar products before it, none had this configuration.

The addition of ceramic tweeters and Class A amplification made the treVolo A, for an audio enthusiast like me, comparable to what a car with a flat-eight engine and four turbos would be to a car enthusiast.

Two years ago, BenQ launched their first audio product—the treVolo electrostatic Bluetooth speaker. I wrote the review for HiFiReport back then—the treVolo had already broken new ground by being the first portable Bluetooth speaker to use an electrostatic membrane.

This time, they were about to be first again. Since entering the audio field, BenQ has been determined to do things differently.

The front grille cannot be removed, but through careful lighting, one can faintly see the white ceramic tweeters positioned at the upper left and right. The treVolo A set an unprecedented record by being the first all-in-one system to incorporate ceramic tweeters.

Shortly after writing the new product announcement, the Taipei Howard Hotel Audio Show was held in December, where BenQ exhibited and held a press conference.

The editorial department didn’t assign me to the press conference, but since the treVolo A was on display, I couldn’t miss it. However, upon reaching the exhibition room, I was disappointed.

BenQ treVolo A Review

While the treVolo A was indeed on display, it was only a static display. Since some tuning was still not finalized, BenQ decided not to demonstrate its sound.

Months later, when the editorial department received notice of a BenQ new product launch, I immediately volunteered. Ah, finally, I thought, I’d get to meet you, treVolo A.

But I was disappointed again.

The three orange circles are the treVolo series’ identifying design, showing consistency with the treVolo 2 and treVolo S styling. The left knob is for quick selection, the right for volume control, and the central display shows the current device status information.

Entering BenQ’s demonstration room, I looked around everywhere but couldn’t find the treVolo A. Instead, there were two or three electrostatic Bluetooth speakers that looked similar to the treVolo.

Karl, who was briefing the media, then told us that this launch was for the treVolo 2, an improved version of the first generation with significantly better sound. After the briefing, he gave a demo.

I endured the entire briefing process (perhaps that’s too dramatic, but it felt that way since my heart wasn’t in it), and finally got the chance to ask Karl when we could see the treVolo A. “There are still some details to adjust. The R&D department is being very cautious and won’t release it without complete confidence and satisfaction,” Karl’s answer reminded me of Jesus in Revelation saying, “I am coming soon,” yet Christians have waited nearly two thousand years, and He hasn’t come.

BenQ treVolo A Review

While Jesus can give Christians inner hope, what about the treVolo A? Before hope could even build, it had already disappointed me twice.

It was these conflicting feelings that made Karl’s phone call so exciting. I had waited for it so painfully!

All-in-One Audio System – Simplicity at its Best

With the story told, let’s bring our focus back to the treVolo A.

Unlike its predecessors – the treVolo electrostatic Bluetooth speaker (including the treVolo S and treVolo 2) which were portable designs with built-in lithium batteries that could be taken anywhere once fully charged – the treVolo A is different.

The treVolo A is larger, heavier, and requires AC power. Users need to find a good spot for it at home, near a power outlet since it must be plugged in. This power requirement isn’t without reason – it has higher power consumption because it’s not just a Bluetooth speaker, but rather an all-in-one audio system.

BenQ has integrated speakers, amplifier, DAC, and digital player into one unit, making it a complete audio system rather than just a Bluetooth speaker.

BenQ treVolo A Review

The bass reflex port is visible on the back panel, and when the volume is turned up, you can feel the powerful airflow it generates. The row of copper plates on top serves as a heat sink, while the terminals are located below. It’s worth noting that BenQ has opted for a laptop-style “Mickey Mouse” power connector rather than an IEC socket.

This type of product actually represents a trend. While dedicated audiophiles might insist that separate components are the purest path, allowing each piece of equipment to perform at its best without interference and offering enthusiasts multiple combination possibilities, a basic system requires at least three components: speakers, amplifier, and source – and that’s not counting the fact you need two speakers.

Not only do these components take up space, but speaker placement is crucial. Many households, considering traffic flow, end up pushing speakers against walls, flanking the TV, or even stuffing them into corners. Unless the speakers are specifically designed for corner placement (like Audionote speakers), it’s difficult to fully realize their potential.

For many households, what’s needed isn’t necessarily grand scale, expansive soundstage, or precise imaging, but rather comfortable, relaxing music floating through the home, allowing people to truly unwind when they return home.

Additionally, with digital listening becoming increasingly prevalent in recent years, playing music through mobile devices like smartphones and tablets has become simpler than ever. All you need is a Bluetooth speaker, or for those more discerning, an all-in-one system like the treVolo A. Music listening should never be a burden.

While the market offers an increasing number of such all-in-one systems from brands like Naim, B&W, Klipsch, B&O, Bose, Jarre, and Sonos – all “foreign products” – can Taiwan produce its own designed and manufactured all-in-one system that stands alongside these international brands? With their previous experience developing the treVolo electrostatic Bluetooth speaker, BenQ’s new treVolo A is truly refreshing.

The lower right section of the back panel features multiple terminals, including two analog inputs (one RCA, one 3.5mm), optical input, and USB (for external storage devices). The treVolo A has built-in WiFi and can also connect via ethernet cable for more stable transmission.

Sleek and Stylish Design Rivaling International Brands

BenQ treVolo A Review

While appearing rectangular at first glance, the design actually incorporates curved lines, combining rectangular and circular elements to express a lively character within its calm demeanor.

The iron-gray body, accented with orange-gold knob frames, presents an elegant minimalist appearance. The design combines modern aesthetics with a 1960s pop art sensibility, making it stand out among current products in its category.

The three orange-gold frames forming three circles serve as a striking identifying design element against the iron-gray base of the treVolo A. What does it identify? It’s similar to the treVolo S and treVolo 2 design! The treVolo 2 improved upon the first generation’s panel design with a circular bass port, becoming the latest identifying design for treVolo products. If you’ve seen other treVolo siblings, the A’s three circles easily connect it to the treVolo family – and now, the treVolo A is the big brother.

The top cover features printed patterns, showing BenQ’s significant investment in production quality.

The center circle is an information display that greets you during power-on and power-off, making it feel less like a machine and more like a family member.

The current source is shown on the screen, and track information scrolls across in marquee style – not just for network streaming, but even for Bluetooth transmission.

Below the scrolling track information is a spectrum wave display. While probably not showing actual waveforms, the wave-like dynamic graphics are pleasing to watch.

BenQ treVolo A Review

The right knob controls volume, while the left knob is for quick track selection. The treVolo A allows users to set 6 quick-select favorites, making it easy to find “My Favorites.”

The top two display screens show music playback from network drives (as indicated by the hard drive icon above), with song titles scrolling in marquee style (as shown in the right image). The bottom shows the input method – WiFi on the left, wired connection on the right.

The image above shows Bluetooth playback, which can display Traditional Chinese characters (as shown in the right image), making it very user-friendly.

Intuitive Operation and Easy Setup

The operation is quite smooth and intuitive.

The included remote control is about the size of an iPhone 4 and feels comfortable to hold.

Basic network setup, internet radio, and network server operations are handled through an app, which is available for free download on both Android and iOS platforms.

BenQ treVolo A Review

Besides Bluetooth transmission capabilities, the treVolo A supports DLNA/UPnP configuration for network listening. Network setup requires coordination between the physical buttons on the treVolo A and the mobile app’s instructions. The setup process is straightforward, and in my multiple tests across different network environments, both wired and wireless configurations worked flawlessly, demonstrating the excellent work of BenQ’s R&D team in this aspect.

For first-time use, you need to connect to your home network, either wired or wireless, to enable phone operation. Wired connection is simple – just plug in the cable. The app automatically detects your treVolo A, and you can customize its name.

Wireless setup is equally straightforward – follow the app’s procedure while coordinating with the physical buttons on the unit. The connection process takes a bit of time, requiring some patience (wireless setup for audio equipment generally needs time). After setup, you can name your treVolo A. If you have multiple treVolo A units, you can distinguish between them.

Once configured, you’ll see six circles representing quick settings, where you can set up shortcuts for easy access to your favorite music.

The three lines in the top left of the right image aren’t expressing resignation – clicking them reveals the menu shown in the left image. Select internet radio to listen to programs from around the world, or server to access music from your home NAS.

While Bluetooth and network playback are the treVolo A’s primary functions, it hasn’t forgotten traditional sources. The lower back panel features a 3.5mm and an RCA analog input. BenQ includes two signal cables: RCA-to-RCA and 3.5mm-to-RCA. These aren’t ordinary red-white cables – they’re thick with gold-plated connectors, suggesting audiophile-grade quality.

There’s also an optical input for connecting Blu-ray players or TVs, utilizing the treVolo A’s built-in DAC for decoding and playback, producing significantly better sound than TV built-in speakers.

BenQ treVolo A Review

Additionally, there’s a USB Type-A input for playing music from flash drives.

Unique Design: Ceramic Tweeters with Class A Amplification

Beyond aesthetics and functionality, the hardware design deserves special attention.

The treVolo A employs a total of five drivers: two tweeters, two midrange drivers, and one woofer. The tweeters and midrange drivers are positioned on the left and right, with the woofer located below the central display. This configuration essentially puts left and right channel speakers plus a subwoofer in one enclosure.

The tweeters specifically use ceramic domes – what makes this special? Commonly seen soft-dome tweeters, while sharing the same dynamic driver structure, use soft diaphragm materials. During rapid movement while producing sound, these soft diaphragms experience deformation.

You can experiment with this concept by quickly moving a piece of paper back and forth – the paper surface won’t maintain perfect linearity in its movement. This principle applies to driver diaphragms, and this deformation produces distortion, what we call “cone breakup.”

So why do some manufacturers still use soft-dome tweeters? Because if this distortion-induced deformation can be controlled within “pleasing” limits, it’s not necessarily a drawback.

However, some designers believe that to reproduce music faithfully, distortion should be minimized as much as possible. They seek to use harder diaphragm materials that resist deformation, thus reducing distortion.

BenQ treVolo A Review

Some use metal diaphragms, others ceramic, and some increase diaphragm rigidity through coating processes.

BenQ’s ceramic tweeters are specially commissioned from a professional driver manufacturer. The diaphragms are created through high-temperature sintering rather than coating, making them genuine ceramic diaphragms. A bullet-shaped phase plug aids in high-frequency dispersion.

These ceramic tweeters offer high rigidity and low mass, with frequency response reaching 60KHz, effectively acting like super-tweeters and helping reproduce complete harmonic structures. While humans can’t hear frequencies above 20KHz (some can’t even hear that high), these higher frequencies are harmonics that influence lower, audible frequencies.

This 60KHz high-frequency extension is something even speakers costing tens or hundreds of times more might not achieve. Yet BenQ wanted the treVolo A to deliver the best possible sound, incorporating this high-frequency extension even in an all-in-one system to ensure optimal sound quality.

The 3-inch midrange drivers are positioned below the tweeters, with a crossover point at 2KHz and a low-frequency cutoff at 120Hz. Below this, frequencies are handled by the central 5-inch woofer.

While I wanted to see these drivers up close, the treVolo A’s grille is non-removable, leaving us to rely on manufacturer-provided photos.

The amplification circuitry is equally impressive, employing five separate amplifier circuits to drive individual drivers. BenQ’s engineering team achieved another breakthrough by incorporating Class A amplification into an all-in-one system.

BenQ treVolo A Review

Class A amplification circuits provide the lowest odd-harmonic distortion among all amplifier types. Why is low odd-harmonic distortion important? Because odd-harmonic distortion creates unpleasant listening experiences, unlike the more pleasant even-harmonic distortion. The less odd-harmonic distortion, the better.

However, this presents a challenge. While Class A amplification offers low distortion, it’s highly inefficient and generates significant heat, with much of the electrical energy converted to heat rather than sound. This is why traditional Hi-End Class A amplifiers are typically large with elaborate heat sinks, yet might not deliver high power output.

BenQ’s engineers addressed this by implementing a hybrid Class A/Class D design. They reserved the low-distortion Class A amplification for the ceramic tweeters, handling the most sensitive frequency range for human hearing, while using Class D amplification for the mid and low frequencies.

They referenced high-end manufacturer Pass Labs’ Class A amplifier designs, incorporating this technology into the treVolo A. Can’t afford a Pass amplifier? The treVolo A incorporates some of their technical excellence.

Due to the heat generation of Class A circuits, pure copper heat sinks are installed above the Class A amplifier section. Caution: these areas get genuinely hot during operation.

The midrange and bass are handled by Class D amplifiers, which offer over 90% energy efficiency with minimal heat generation.

The power breakdown is impressive: two independent 18W Class A amplifiers for the ceramic tweeters, two 15W Class D amplifiers for the midrange, and one 50W Class D amplifier for the woofer. With total power exceeding 100 watts and three-way electronic crossovers individually driving the high, mid, and low frequencies, the treVolo A is a serious piece of equipment.

BenQ treVolo A Review

Audiophile Components: Pursuing Sound Quality at Any Cost

Beyond its basic design, the treVolo A stands unique in its use of premium components.

For audiophiles, the components inside audio equipment are crucial – there’s a clear difference in sound between using premium parts and ordinary budget components.

While some audio manufacturers prominently advertise their use of high-end components to suggest superior sound quality, BenQ, though new to the audio industry, demonstrates an audiophile-grade commitment rivaling established Hi-End manufacturers.

Let me highlight a few impressive specifications:

The treVolo A’s built-in DAC uses the AKM4495 chip from Japan’s Asahi Kasei. This high-end DAC chip provides 32-bit stereo digital decoding, 128x oversampling, 123dB dynamic range, ultra-low noise, ultra-low distortion, and fully balanced output. For context, this is the same chip used in Esoteric’s digital sources, including their flagship Grandioso model.

Additionally, the digital input section employs the AKM 4117 digital receiver chip, Vishay capacitors and resistors, Wima and Rifa capacitors, and Bourns potentiometers. BenQ’s engineers believe that carefully selected components are essential for optimal performance and durability.

BenQ treVolo A Review

Seeing this component list raises the question: Have BenQ’s engineers gone mad? How did they create such a monster? This specification list belongs in high-end equipment – if this isn’t Hi-End, what is? When I asked Karl Wang why BenQ used so many premium components unprecedented in this product category, he responded: “All-in-one systems can’t be upgraded, and consumers choose them over separate components usually out of necessity. Therefore, we decided to use the best components from the start, meeting the needs of those seeking both convenience and quality.”

Rich Sound with Solid Character

Ultimately, any design serves the purpose of sound quality – so how does the treVolo A perform? When Karl delivered it to our office for demonstration in our listening room, I was immediately impressed by this long-awaited unit.

It produces a rich, full-bodied sound signature, distinctly different from the clear, delicate, and airy character of the treVolo Bluetooth speaker. The treVolo A immediately presents itself as a small audio system, with deep, solid bass that some bookshelf speaker systems might struggle to match.

Vocal reproduction is particularly engaging, with clear articulation and detailed nuances creating a vivid presence. Guitar music is especially enjoyable – the ceramic tweeters with Class A amplification prove their worth through clear string vibrations and rich resonance, delivering warm tones without any harshness.

The drum reproduction can be startling – the treVolo A produces unexpectedly full-bodied percussion with rounded notes, solid texture, and natural decay. With proper spacing from side and back walls, the sound never feels boxed in.

Surprising Bass Depth and Volume

I particularly enjoy its vocal reproduction. The treVolo A’s full-bodied foundation brings out the “flesh and blood” quality in voices, creating an engaging listening experience.

BenQ treVolo A Review

Listening to Ella Fitzgerald and Louis Armstrong’s duets is absolutely delightful. The system clearly differentiates their vocal characteristics, with particularly vivid midrange reproduction beneficial for vocal performance.

Playing Adele’s “Hello” reveals her powerful delivery, with emotions fully conveyed in the climbing passages. The seemingly enhanced drums in the recording come through with impressive depth and impact. In “I Miss You,” the drum sounds are solid and energetic, with discernible drum skin vibrations adding realism.

Joe Cocker’s “Fire It Up Live” album, particularly his cover of The Beatles’ “Come Together,” demonstrates surprisingly powerful bass response. It’s remarkable that such a compact unit with a modest-sized active woofer can produce such impressive low frequencies.

BenQ’s engineering team must include some exceptional talent, comparable to European and American Hi-End audio manufacturers.

Clear Layering with Tangible, Vivid Expression

I’ve also discovered that the treVolo A has excellent sound layering – it doesn’t muddle everything together or become congested, and the sound has a three-dimensional quality.

Although the left and right channels are housed in a single cabinet, they remain distinctly separated. While it can’t achieve the same vivid dimensionality as two physically separated channels, among products in its class, if not the absolute best, it certainly ranks among the top performers.

BenQ treVolo A Review

Take Joe Cocker’s live recording – he’s a rock singer, and naturally, the music is rock with rich and diverse instrumentation. The treVolo A presents clear layering, making the music sound organized and coherent while maintaining an energetic atmosphere.

That’s wonderful.

Antonio Forcione’s Live album is a true pleasure when listening to the guitar through this system.

Compared to the treVolo 2 electrostatic Bluetooth speaker, which delivers guitar with the unique agility and transparency characteristic of electrostatic speakers, the treVolo A’s guitar presentation is different. It’s more grounded, with solid sound textures and fuller cabinet resonance, resulting in an exceptionally realistic feel.

For instance, in Antonio Forcione’s Live album, whether he’s playing slow or fast pieces, his seemingly supernatural playing technique can be appreciated even through a single-unit system like the treVolo A.

The left-hand slides creating kaleidoscopic musical variations, alternating between wild runs and body percussion, the force applied when strumming – the treVolo A doesn’t compromise on musical dynamics despite its compact size. All these nuances are clearly audible.

If I can hear it, you certainly can too.

BenQ treVolo A Review

Symphony Performance That Doesn’t Disappoint

The treVolo A also performs admirably with symphonic music.

Take Previn conducting the Royal Philharmonic Orchestra in Rachmaninoff’s Symphony No. 2 as an example.

When listening from directly in front, it naturally lacks the stereophonic soundstage of a true two-channel system – that’s unavoidable, and even the lengthier Naim Muso can hardly compete with a speaker system in this regard.

However, while the soundstage might be limited, the sound quality doesn’t suffer at all.

When I play music in the living room and move to other areas – whether to another room or the open-concept kitchen extending from the living room – the sound from the treVolo A, blending with the space, never feels lacking or inadequate.

The musical dynamics, instrumental layering, and counterpoint between strings and winds – the treVolo A delivers it all! The rich foundation gives the symphony its proper weight, with sound that’s neither floating nor loose, but dense, substantial, and stable.

BenQ treVolo A Review

After Listening, You’ll Wonder: Shouldn’t I Have One at Home?

This isn’t an audio system meant for sitting formally in front of speakers to listen to music – it’s designed to fill your home with music, and the sound quality is genuinely impressive.

If you were to sit formally before it, none of these all-in-one systems would tempt you to spend money. But when used and viewed correctly, an all-in-one system like the treVolo A with such sound performance will make you think: shouldn’t I have one at home?

After experiencing the treVolo electrostatic Bluetooth speaker, I thought BenQ’s engineers were exceptional for creating such uniquely pure and clear sound rarely found in Bluetooth speakers. After hearing the treVolo A, I’m convinced that BenQ’s R&D team is truly remarkable – they genuinely understand audio.

If you’re looking for a home audio system that you can control via smartphone, stream digital music from the internet, and enjoy good sound quality – all in a simple package that doesn’t require complex speaker placement to satisfy your music listening needs.

The treVolo A shouldn’t be left off your shopping list.

Although I’m writing this review while the treVolo A plays music in my living room as I sit nearby recording my impressions, I’m already wondering how much I’ll miss it when I finish this review and return it to BenQ. The remote control and cables included with the treVolo A are far superior to common RCA cables, featuring gold-plated connectors and high-purity oxygen-free copper conductors.

Equipment Specifications

  • Type: All-in-one audio system
  • Drivers: 2x 2-inch ceramic tweeters; 2x 3-inch midrange drivers; 1x 5-inch woofer
  • Amplifier Power: Class A (tweeters) 18W x 2; Class D (midrange) 15W x 2; Class D (woofer) 50W x 1
  • Frequency Response: 40Hz-60KHz
  • Crossover Points: 2KHz, 120Hz (active electronic crossover)
  • Inputs: 1x RCA; 1x 3.5mm; 1x USB type A; 1x Optical; Network (RJ45)
  • Wireless Network: 802.11 a/b/g/n
  • Bluetooth Format: Bluetooth 2.1 EDR
  • Power Consumption: 120W
  • Dimensions: 450x160x238 mm (WxDxH)
  • Weight: 9.8KG