Cyrus CDi + 82 DAC Combination Review
I still remember Cyrus from many years ago, though only from listening to others talk about it. However, their rich and warm sound left a deep impression on me.
After such a long time, I finally have the opportunity to experience their equipment again. This time, I’m reviewing the CDi CD player and the 82 DAC integrated amplifier.
Unwavering Persistence
The unit comes in a double-layered cardboard box, providing thorough protection. Upon opening, it’s exactly as I remember – simple body lines paired with a matte black casing, understated to the extreme. Do you know how long Cyrus has maintained this design? The answer is over 20 years! It’s quite bold to keep the same design for such a long time.

To be honest, after all these years, Cyrus’s appearance might seem a bit old-fashioned. However, the manufacturer’s persistence has its reasoning. Think about it: if you initially bought just one unit, then another a few years later, and then another… you’d find that when all Cyrus units are stacked together, they maintain excellent visual consistency, and they look better the more you see them.
Basically, they’re suggesting to consumers: if you’re going to buy, buy the complete set! Cyrus’s persistence isn’t just about the exterior design; they’re also particular about the chassis construction. Unlike common aluminum plate assembly, aluminum extrusion, or CNC machining, they work with a Swedish factory to cast aluminum alloy casings. After casting, each unit undergoes meticulous hand polishing before being painted in either black or silver.

The manufacturer emphasizes that this cast aluminum chassis provides excellent shielding, preventing interference with internal circuit components. The cabinet also offers high rigidity, avoiding sound quality degradation from mechanical resonance.
Importantly, all products use the same chassis design, ensuring consistent shielding and anti-vibration performance. When upgrading equipment in the future, you only need to replace the internal components rather than the entire unit, saving both money and being environmentally friendly.
Compact Design: Another Cyrus Signature
Another notable characteristic of Cyrus is its compact body size.
How small? About the size of a shoebox, but only half the height.
I recall our editor-in-chief once interviewed the manufacturer, who explained that the small size doesn’t occupy much space, and while the equipment is refined, it remains understated and unobtrusive, resulting in high “wife acceptance factor.”

Of course, it’s not just about spouse approval; they also considered the needs of users with limited space, avoiding equipment that takes up too much living space.
CDi CD Player: Inherited from Their Signature Series
Let’s look at the CDi first. The manufacturer emphasizes that from the initial power input to the final analog signal output, every detail has been carefully considered with sound quality in mind. It essentially inherits from their flagship model – the CD Xt Signature, sharing identical exterior and button layouts. The only way to distinguish them is the “Signature” sticker on the high-end model.
Additionally, while the CD Xt Signature is purely a CD transport, the CDi is a CD player with two RCA analog outputs on the back panel. It also has digital output terminals for connecting to other DACs and can connect to other Cyrus products through their proprietary MC-BUS terminal.
Equipped with Self-Developed Servo Evolution
Most importantly, the CDi features Cyrus’s latest generation laser pickup mechanism, called Servo Evolution. Both the laser pickup mechanism and the servo circuits required for CD reading are designed by Cyrus, rather than using common CD-ROM or DVD-ROM computer drive kits. They claim this reduces jitter to a minimum, achieving enhanced music purity.

The CDi uses a slot-loading CD design. In practice, you simply insert the CD and give it a gentle push with your fingertip for automatic loading – it feels light and very high quality! The manufacturer believes this design is quieter and involves less contact than traditional tray-loading mechanisms while making the unit more aesthetically pleasing.
Regarding the DAC chip, the manufacturer emphasizes that the CDi uses the same 32-bit DAC chip as their flagship DAC XP Signature. Although not specified in the documentation, it’s likely the Burr-Brown PCM 1795.
At this point, I became curious – with features inherited from both the CD Xt Signature and DAC XP Signature, how much would this CD player + DAC combination cost? After checking, I found that the Signature combination costs around $8,933, while the CDi is available for about one-fifth of that price at $1,800. Budget-conscious audiophiles should know which to choose!

82 DAC Integrated Amplifier
Next is the 82 DAC integrated amplifier used in this combination. Despite its petite size, this integrated amp can deliver 88 watts per channel into 6 ohms, easily handling most home speakers without issues.
The manufacturer specifically mentions that the 82 DAC’s preamp circuit inherits from the previously mentioned DAC XP Signature. It includes a large toroidal transformer and two 10,000uF filter capacitors, with separate power supplies for digital and analog circuits to prevent sensitive music signals from noise interference.
Built-in DAC Supporting 24bit/192kHz
Furthermore, this integrated amplifier includes DAC functionality, accepting optical, coaxial digital, and USB digital inputs, supporting high-resolution formats up to 24bit/192kHz. While not boasting 32bit/384kHz capabilities like some other brands, 24/192 is more than sufficient for currently available high-resolution music files online!
Abundant Input/Output Terminals
Looking at the rear panel, you’ll find an impressive array of input/output terminals! The manufacturer says this is to provide greater flexibility for the 82 DAC’s use.

Specifications include:
- 6 RCA analog inputs (renameable through menu)
- Zone 2 second zone output
- Pre Out preamp output
- 3.5mm headphone output with high-quality headphone amp circuit design
- 2 sets of speaker outputs for bi-wiring capability (Note: only hollow banana plugs are compatible; solid banana plugs or Y-terminals cannot be used)
Remember to avoid using overly thick signal cables and power cords, as this will prevent overcrowding – given the compact chassis size and numerous I/O terminals, space is naturally limited!
More Than Just Rich Sound
Now that we’ve covered the basic specifications of the CDi and 82 DAC, let’s focus on their sound performance. As mentioned earlier, my impression of Cyrus had always been rich and warm, but this time it completely overturned my stereotypical expectations, and the difference was immediately noticeable.

I tested the system with two pairs of speakers: first with HiFiReport’s reference equipment CC Admonitor Preference Plus and Submonitor MKIII bass columns, and then with the Phonar Veritas P4 floor-standing speakers.
Playing Martha Argerich’s live recording from “Lugano Concertos,” starting with Track 1, “Beethoven Piano Concerto No. 1,” the piano notes were crystalline and transparent, radiating an elegant and noble luster. The grand piano’s presence was large and distinct, with clear layering against the orchestra’s backdrop. The relationship between soloist and orchestra was precisely defined, with a very spacious soundstage and clean, profound musical background.
During Argerich’s solo passages, the piano under her fingertips became even more vivid and prominent. The sudden fortissimo passages showed not only impressive force and quick response but also great dynamic range, fully expressing the emotional content of the performance.
Exceptional Detail Interpretation
Moving on to rising musician Ray Chen’s recently released “Reverie,” I found both Taiwanese and German pressings at Taipei’s Jiajia Records, with only a small price difference. While uncertain about any differences between the versions, I somewhat sheepishly chose the more expensive German pressing.
The first three tracks feature “Tartini: Devil’s Trill Sonata.” I started listening at a lower volume, and even at this level, the string quality remained excellent, maintaining density, thickness, luster, and resolution. Rohan de Silva’s piano accompaniment in the background showed clear instrumental body and positioning.
Consider this: even at low volume during the quiet of night, the system maintains excellent detail interpretation – quite impressive indeed.
When I returned to normal volume for the second track, Ray Chen’s performing presence immediately became apparent, with enhanced force and technique. The piano remained steadily accompanying in the background. The third track carried more lyricism, or perhaps melancholy, with less weight than the previous tracks.

This demonstrates how the Cyrus system easily reveals these nuances at both high and low volumes, allowing listeners to experience the young musician’s passion and vitality.
Moving to “TAS 2016” audiophile compilation, track 14 features Katherine Bryan’s interpretation of “Sarasate: Zigeunerweisen.” Unlike other versions, Katherine performs this originally violin piece on flute. The first half carries a melancholic atmosphere, with the flute tone sounding smooth and delicate, clearly presenting both the airflow and subtle breathing sounds.
The latter half becomes more passionate, sounding light and agile through the Cyrus system, with clearer air presence and sudden energy bursts in the high notes before an abrupt end.
If you’re tired of the violin version, this flute interpretation offers a refreshing alternative.
Returning to track 4, “Single Girl,” performed by Mary Wilson, Barbara Young, and Clay Martin, with Wilson as lead vocalist and the others providing harmony. Through the Cyrus system, the vocals are clearly centered with precise articulation and appropriate thickness. The vocal imaging is properly sized and distinct, achieving a perfect balance between fullness and refinement. The sound foundation is clean and pure, with clear separation between Mary’s lead vocals and the harmony parts, while the accompanying piano remains full-bodied without overshadowing the vocals.
Bouncy Bass with Substance
Seeking something more exciting, I played Michael Jackson’s “Jam.” Initially, the opening glass-breaking sound seemed a bit soft, lacking crispness and force.
This wouldn’t do! After stepping out to inform my editorial colleagues, I returned and boldly increased the volume. Indeed, my previous restraint had been too conservative! This time, the glass-breaking effect emerged with proper crispness, accompanied by improved speed and force. The bass became bouncy with good weight. Despite the nominal 88 watts, the system showed no signs of strain throughout the track, exceeding my expectations.

I didn’t dare push it further – not because the system couldn’t handle it, but for fear of complaints from neighboring offices.
This listening session completely overturned my stereotypical impression of Cyrus’s “British sound.” Beyond the thickness and richness, it offered additional luster, resolution, and speed. Vocals achieved a perfect balance, while the bass had substance without lag, avoiding any stuffiness and maintaining a light, bouncy character.
Detailed and crisp at low volumes, powerful and unwavering at high volumes – truly a versatile little system!
Equipment Specifications
Cyrus CDi
- Type: CD Player
- Terminals: Digital Coaxial x1, Optical x1, RCA x2, MC-BUS x1, PSX-R x1
- Maximum Resolution: 16bit/44.1kHz
- Dimensions: 73x215x360mm (HxWxD)
- Weight: 3.6kg
Cyrus 82DAC
- Type: DAC Integrated Amplifier
- Output Power: 88W (6 ohms)
- Analog Inputs: RCA x6
- Analog Outputs: Zone2 (RCA) x1, Pre Out x2, 3.5mm headphone x1
- Digital Inputs: Optical x2, Digital Coaxial x2, USB Type B x1
- Maximum Resolution: 24bit/192kHz
- Dimensions: 73x215x360mm (HxWxD)
- Weight: 6.9kg
