ELAC SUB1225W_2.1 Review_1
|

ELAC SUB1225W Review


However, after budget-conscious enthusiasts acquire an amplifier and main speakers, the budget left for a subwoofer can often be quite limited. This is where a high-value subwoofer comes into play, such as the ELAC SUB1225W featured in this article. Priced at less than 20,000 NTD (around $650 USD), it boasts a large 12-inch driver and a full suite of features. It can effortlessly integrate with various amplifiers and speakers, significantly enhancing low-frequency performance.

Design and Aesthetics

Despite its accessible price point, the ELAC SUB1225W, introduced by ELAC, sports a refined aesthetic. It’s available in black and white finishes; the white version sent for review features a matte coating paired with a light grey grille. This minimalist design aligns perfectly with contemporary living styles, allowing it to blend seamlessly into modern living rooms.

Driver and Cabinet

Removing the grille reveals a 12-inch woofer on the front baffle, featuring a PP (Polypropylene) cone known for its excellent rigidity. Not only is the driver large, but it also incorporates ELAC’s signature extra-thick surround, enabling longer excursion for the cone. This allows it to move more air, boosting the impact of the bass. Behind the cone, a powerful magnet motor and a reinforced metal frame are used to enhance driver control.

The SUB1225W houses a potent Class D amplifier, delivering 150 watts RMS power and a peak output of up to 350 watts. This ample power is sufficient to handle the dynamic demands of various music genres or movie soundtracks. Additionally, the cabinet utilizes a bass-reflex design, with a slender rear-firing port located at the top rear panel. This port efficiently channels internal air pressure, contributing to cleaner sound. The manufacturer specifies a low-frequency extension down to 33Hz.

It’s worth noting that the rear-firing port means the subwoofer cannot be placed flush against a wall; a certain distance is necessary for optimal performance.

Connectivity and Controls

Flipping to the SUB1225W’s rear panel, you’ll find not only standard controls like volume, phase, and crossover frequency (80-180Hz) knobs, but also a unique “high level input” feature. Many users building a 2.1-channel system might encounter an issue: their amplifier lacks a dedicated subwoofer output, preventing them from sending a signal to the subwoofer via RCA.

High-Level Input Utility

Recognizing the needs of two-channel enthusiasts, ELAC has equipped the SUB1225W’s rear panel with standard speaker terminals in addition to RCA analog inputs. This allows direct connection to the speaker terminals of a power amplifier, receiving the full-range music signal. The subwoofer’s internal low-pass filter circuit then filters out the mid and high frequencies above the set crossover point.

This means you can configure a 2.1-channel system even if your amplifier doesn’t have a sub-out, offering greater practical utility compared to most active subwoofers.

Listening Test Setup

For the listening test, I paired the SUB1225W with a set of Dali Opticon 2 MK2 bookshelf speakers to form a 2.1-channel system. The front end was a NAD M10 V3 streaming amplifier, with the crossover frequency set to 80Hz via the amplifier’s settings. The Opticon 2 MK2 has a smooth and warm sonic signature, but due to its cabinet size limitations, its low-frequency energy and extension were somewhat restricted in our approximately 7-ping (around 23 sq meter) primary listening room.

Listening Performance

As expected, adding the SUB1225W subwoofer resulted in a significant improvement in sound quality. Not only did the bass feel deeper, but with the speakers freed from reproducing the lowest frequencies, the mid and high frequencies also sounded clearer.

The SUB1225W’s design, featuring a large driver with long excursion, provides notable low-frequency impact. It handled the relatively large listening space with ease, instantly giving the Dali Opticon 2 MK2s the presence of larger floorstanding speakers. I started by playing “The Audacity” from progressive metal band Polyphia’s album “Remember That You Will Die.”

The relentless heavy hits from the electric bass and kick drum in the track were incredibly visceral, each punch hitting the chest solidly. The bass decay was also quite precise, without any sense of flabbiness. The SUB1225W demonstrated excellent speed, completely devoid of any sluggishness, and with the subwoofer’s support, the rapid guitar passages sounded even more distinct.

Next, I listened to Saint-Saëns’ Symphony No. 3 conducted by Myung-Whun Chung. In the second movement, the organ’s deep rumble enveloped the surroundings, gently massaging the body. This reproduction of the lowest frequencies is something bookshelf speakers simply cannot achieve, laying a powerful foundation for the large-scale orchestral piece.

While the SUB1225W might not offer the same level of low-frequency detail as high-end subwoofers, its energy is abundant, and its extension performance is commendable.

Conclusion

This SUB1225W subwoofer boasts an attractive appearance, comprehensive features, and sound quality that clearly stands out among products in its price range. Whether you’re looking to build a multi-channel system or add a subwoofer to your two-channel setup to enjoy the compelling low-frequency reproduction of a 2.1-channel system, the SUB1225W is an ideal entry-level solution.

Specifications

* Product Type: Active Subwoofer
* Amplifier Type: Class D
* Maximum Output Power: 350W (Peak) / 150W (RMS)
* Frequency Response: 33Hz-200Hz
* Crossover Frequency: 80Hz-180Hz
* Driver: 12-inch long-throw PP cone driver
* Dimensions (WHD): 360x375x420mm
* Weight: 15.8 kg