|

Fosi Audio P4 Review


Overview

The Fosi Audio P4 is a compact, fully solid-state stereo preamplifier that connects up to three analogue sources to a single amplifier, adds a motorised volume control with remote, and provides bass and treble adjustment — all in a chassis that matches the design language of Fosi’s popular V3 amplifier family. It fills a gap in the budget audio market that many listeners did not even know had a name: the problem of wanting a focused, high-quality power amplifier without sacrificing the ability to switch between sources or adjust volume from the sofa. If you own a single-input Class D amplifier and have been juggling cables to change between your DAC, CD player, and turntable, the P4 is the solution the Fosi community specifically asked for and the brand delivered.

The story behind the P4 is unusually direct for a product launch. When Fosi’s V3 power amplifier became one of the most recommended budget stereo amplifiers in enthusiast circles, the community quickly identified its one structural limitation: no preamp stage, no source switching, and no remote volume control. Forum threads on multiple platforms began accumulating requests for exactly the product the P4 turned out to be. Fosi listened, developed the P4 with input from those same community members, and sold out its first production batch before the product had even been formally reviewed. That kind of market-validated demand is a reassuring signal about how clearly the P4 addresses a real listener need.

Reviewers who received pre-release units described the P4 in consistent terms: clean, transparent, feature-complete for the intended use case, and built to a standard that matches or exceeds what the price tier normally offers. Independent acoustic measurement data confirms the specifications are genuine rather than marketing aspiration — the P4’s measured performance lands among the better-performing preamplifiers tested at its price point and well above. For anyone building or expanding a modern desktop or shelf-system around a Class D amplifier, the P4 is the natural, purpose-designed companion piece.

This review covers how the P4 works technically, what all its controls actually do, how it performs in practice, what real users experienced, and who should — and should not — add one to their system.


Key Features & Tech Specs Explained

What a Preamplifier Actually Does in a Modern System

A preamplifier — or preamp — sits between your audio sources (a DAC, CD player, streaming device, turntable with phono stage, etc.) and your power amplifier. It handles three jobs that a power amplifier alone cannot: selecting which source is currently playing, setting the listening volume before the signal reaches the power amp, and optionally shaping the tone of the signal. In vintage and traditional hi-fi, the preamplifier was always a separate and carefully engineered component. The rise of all-in-one budget Class D integrated amplifiers changed this temporarily, with the amplifier absorbing the preamp function. The P4 restores the proper division of labour — a dedicated preamp doing its specific job with precision, paired with a power amplifier doing its specific job with equal focus.

This separation matters practically for several reasons. A dedicated preamp allows you to place the power amplifier in the optimal location for speaker cables — near the speakers — while keeping the preamp at your listening position where you can interact with it. It allows you to use a power amplifier with no input selection, which is architecturally simpler and potentially cleaner. It allows you to switch between sources without physically re-plugging cables. And it allows remote volume adjustment without requiring the power amplifier to include a remote-capable volume pot, which at budget price points is a rare and expensive feature.

Motorised Potentiometer: The Feature That Changes the Experience

The single most distinctive hardware feature of the P4 is its motorised analogue potentiometer (a potentiometer being the technical name for the component that controls volume). Unlike the vast majority of preamplifiers at this price tier, which use either a digital volume control circuit or a manual-only analogue pot, the P4 uses a physical analogue volume control driven by a small electric motor. When you press the volume buttons on the remote, the motor physically rotates the volume knob — you can watch it move. When you adjust the volume by hand, the knob moves normally.

This approach solves a common frustration with remote-controlled audio devices. Many budget units use a digital volume control that is technically separate from the physical knob — turn the knob while the remote has been used, and the knob position no longer reflects the actual volume level. With the motorised pot in the P4, the physical knob and the remote always agree, because they are the same component. Reviewers across multiple platforms specifically called this out as one of the most satisfying elements of daily use: the physical confirmation that the remote is doing what it says it is doing. It also contributes to the sound quality, since an analogue potentiometer in the signal path introduces less distortion and noise than typical digital volume control circuits.

Transparency-First Specifications

The P4’s measured performance begins with a THD+N (Total Harmonic Distortion plus Noise — the combined measure of signal errors an analogue circuit adds) of ≤0.003%. To contextualise that number: most listeners cannot hear harmonic distortion below about 0.1%, meaning the P4’s distortion is more than 30 times below the threshold of audibility. The SNR (Signal-to-Noise Ratio) is specified at ≥110dB, meaning the gap between the music signal and the background noise floor is wider than 110 decibels — a figure that describes near-perfect silence when nothing is playing. Importantly, independent third-party measurements of the P4 have confirmed these claims, with a measured SNR of approximately 114dB in the lowest gain position — a result that places it among the better-performing preamplifiers at its price point by a meaningful margin.

The frequency response is specified at 20Hz–20kHz (±0.1dB) — the full range of human hearing, with an extraordinarily tight tolerance of just ±0.1dB deviation across the entire audible spectrum. That figure means the P4 does not colour the sound in any audible way when tone controls are set to flat. A reviewer who compared the P4 in bypass mode directly against significantly more expensive reference preamplifiers described it as “analytical but not sterile” — which is exactly the right description for a transparent preamp that does its job without adding or subtracting character.

Three-Level Gain Control: Matching Your Sources and Amplifier

The rear-panel gain switch offers three positions — 3dB, 6dB, and 9dB — corresponding to output levels optimised for source devices with 1V, 2V, or 4V output levels respectively. Gain in a preamp context describes how much the device amplifies the incoming signal before passing it to the power amplifier. If your power amplifier reaches full output at a relatively low input level, running the preamp at 9dB gain may make the volume control feel too sensitive — a small turn produces a large change in loudness. The 3dB setting gives the finer volume control resolution in this scenario. Conversely, if the power amplifier needs a stronger input signal to reach comfortable listening levels, the 9dB setting provides that. The centre position (6dB) suits most conventional setups as a practical starting point.

One practical note: the gain selector is a rear-panel slider switch rather than a front-panel knob. This makes it less convenient to change on the fly, but it is a setting that most users choose once for their system configuration and then leave. The slider’s position can sometimes be ambiguous to read by feel alone in a darker environment — a minor ergonomic note that multiple reviewers mentioned, without it affecting their overall positive assessment.

Tone Controls with Bypass: Two Preamps in One

The front panel carries three knobs: bass, volume (motorised), and treble. The bass and treble controls each offer a ±12dB adjustment range, with a clearly defined centre-click detent position that returns the controls to a flat, neutral setting. This is an important practical detail — the tactile confirmation of the flat position means you do not have to guess or estimate when returning to neutral. A rear-panel bypass switch toggles the entire tone control circuit in and out of the signal path entirely. With bypass engaged, the audio signal travels through the P4 without passing through any tone shaping circuitry at all — the cleanest possible path from source to amplifier. This gives the P4 two distinct operating personalities: a transparent signal router when bypassed, and a practical equaliser when tone controls are engaged. Listeners who prefer a completely flat response for critical listening can use bypass, then engage the tone controls for casual listening at low volumes where a little bass boost adds welcome body and warmth.


Build Quality & Design

The P4 is built to the same specification as the V3 stereo amplifier in Fosi’s current lineup — a CNC-machined aluminium enclosure with a brushed finish and minimal surface decoration. The dimensions (approximately 14cm wide, 10cm deep, 3cm tall) make it fractionally wider than the V3, which means the two units can be stacked with the P4 on the bottom or placed side by side as matching bookend components. Multiple reviewers who already owned the V3 specifically praised how naturally the P4 integrates aesthetically with existing Fosi equipment — same height, same finish quality, same restrained design language. It looks and feels like a matched pair rather than two products from different eras.

The motorised volume knob has a satisfying, slightly damped rotation with a quality that feels more expensive than the price implies. The bass and treble knobs share that quality, with the centre-detent click providing a positive mechanical confirmation rather than a vague soft stop. The front-panel push-button simultaneously handles power on/off and input selection cycling — pressing briefly switches inputs while holding cycles through longer-press functions including power. LEDs indicate which of the three inputs is currently active. The rear panel is logically arranged: three pairs of RCA inputs in a row, the single RCA output, the 3.5mm pre-out, the gain and bypass switches, and the DC power connector.

The remote control is a compact infrared unit with a well-organised button layout covering power, mute, volume up/down, source selection, and several additional functions that also work with other Fosi equipment including the ZD3, ZP3, and BT20A MAX. The remote requires two AAA batteries, which are not included — a minor packaging note worth being aware of before setup. Power is provided by a 12V/1.5A wall adapter. The power cable from the adapter to the unit is relatively short, which can constrain placement options depending on the available desk layout.


Sound / Performance

The P4’s sonic character in bypass mode is essentially the absence of character — it is transparent enough that the distinguishing factor in your system will be the quality of your sources and amplifier rather than anything the P4 adds or subtracts. Reviewers who used the P4 between well-regarded DACs and power amplifiers consistently described hearing their equipment rather than hearing the P4. One community reviewer who tested the P4 against a considerably more expensive reference preamplifier noted the difference was a slight reduction in spatial depth — the kind of comparison that places the P4 in genuinely serious company rather than dismissing it as a budget compromise.

The measured noise floor of ≤9μV is low enough to be completely inaudible with standard passive bookshelf speakers — a result confirmed by every reviewer who tested the P4 in practice. Multiple reviewers with sensitive speaker setups noted that even at maximum gain setting with volume near maximum and no audio playing, the speakers produced no audible hiss, hum, or noise. This dead-silent operation between tracks is one of the most consistently praised qualities of the P4 in user feedback. It is also a technically meaningful distinction from some competing products at similar prices, which exhibit faint but perceptible background noise.

The tone controls behave exactly as a well-designed passive EQ should: gradual and musical rather than sudden and jarring. The 12dB of available bass boost is sufficient to meaningfully compensate for bookshelf speakers that roll off early, or to add weight to music at low-volume listening levels where bass naturally sounds thinner. The treble control can tame slight harshness in bright-sounding recordings or speakers without introducing muddiness. The centre-detent position reliably returns the controls to flat. Third-party reviewers who specifically tested the tone control circuit noted that it introduces some additional distortion in the signal path when engaged — a normal characteristic of analogue tone control circuits, and the reason the bypass switch exists for listeners who prioritise absolute signal purity.


Real-World Use Cases

The P4’s defining use case is completing a source-switching and volume-control layer around a focused power amplifier that lacks these functions — specifically, Fosi’s own V3, ZA3, or Two V3 mono amplifiers, but equally any other Class D or Class AB power amplifier with simple RCA inputs. The standard configuration has the P4 sitting between multiple sources (a DAC for streaming, a CD transport, a phono preamp for vinyl) and a single power amplifier, with the P4 handling all input selection and volume via the remote. The pre-out 3.5mm connection extends the setup to include a powered subwoofer, converting a two-channel stereo setup into a 2.1 system without needing an additional crossover or controller.

Several creative applications have emerged in community discussions that go beyond the standard configuration. One user ran the P4’s pre-out to a second separate amplifier chain, effectively creating a bi-amplified speaker system where one amplifier drove the woofer section of each speaker and another drove the tweeters. Another user connected four ZA3 mono amplifiers via both the main RCA output and the pre-out, creating a four-amplifier system for a multi-speaker listening room. The motorised volume knob in this configuration means all four amplifiers track the same volume level simultaneously via the remote, which is a level of system integration not normally achievable at this price tier. A third common use case is the home office or desk system where a turntable, DAC, and secondary Bluetooth source share the three inputs, with the entire setup controlled from the listening position without touching the equipment.

The P4 is specifically documented to not be a phono preamplifier. Turntable connection requires either a turntable with a built-in phono stage (which converts the cartridge signal to line level before reaching the P4) or an external phono preamp such as the Fosi Box X2 feeding into one of the P4’s RCA inputs. This is an important clarification for vinyl listeners planning their system.


What Real Users Are Saying

The community reception to the P4 has been remarkably consistent across every platform where it has been discussed. The central theme in early user feedback is the relief of finally having a purpose-built solution to the source-switching and volume-control problem that Class D amplifier users had been managing through workarounds. Multiple reviewers describe the same pattern: using a simple multi-input passive switch box or manually swapping cables between sources for months or years, then discovering how much more enjoyable and flexible the listening experience becomes with a proper preamp in the chain. The P4 is described again and again as “exactly what I was looking for” — a phrase that speaks to how clearly it was designed around a specific and genuine user need.

The motorised volume knob generates particular enthusiasm in user accounts. Reviewers describe watching the knob respond to remote presses as genuinely satisfying in a way that goes beyond the functional benefit. There is something inherently pleasing about a physical component that moves in real time with the remote, and multiple users note that it makes the system feel more like a coherent, premium piece of equipment than the price would suggest. The mute button — available via remote — is also frequently praised as an unexpectedly useful feature for everyday use: pausing audio during a phone call, silencing advertisements in streaming content, or temporarily quieting the system without losing volume settings.

User accounts also highlight the P4 as a community-born product, noting with evident satisfaction that Fosi Audio built it in direct response to forum requests and community feedback. This origin story — unusual for a consumer electronics product — generates genuine goodwill among buyers who were part of the conversation that led to its development. Multiple reviews explicitly reference the Fosi development thread, the user requests, and the gratification of seeing a brand respond with a product that addressed the stated requirements without unnecessary additions or compromises. For a community that values direct brand interaction, this responsiveness is a significant part of the product’s appeal.


Pros & Cons

Pros

  • Exceptional measured performance: SNR of 114dB confirmed by independent third-party measurements, with THD+N ≤0.003% and noise floor ≤9μV — genuinely transparent signal handling that outperforms the specification tier it inhabits, confirmed by third-party measurement data
  • Motorised analogue potentiometer ensures the physical volume knob always reflects the actual listening level, whether adjusted by hand or remote — eliminating the knob-position mismatch common in digital volume control designs, based on spec analysis and user feedback
  • Three independent RCA inputs with one-press source switching from the front panel or remote, filling the most commonly cited missing feature in paired budget Class D amplifier setups, based on user feedback
  • Tone control bypass switch provides a clean, unaltered signal path for critical listening, while ±12dB bass and treble controls with centre-click detents are available for casual or room-compensating EQ, based on spec analysis and reviewer testing
  • Design dimensions and finish match the Fosi V3 amplifier family precisely, enabling clean stacking or side-by-side placement in a unified desktop system, based on spec and user feedback
  • Included remote works across multiple Fosi products including the ZD3, ZP3, and BT20A MAX, reducing remote clutter in all-Fosi systems, based on product documentation

Cons

  • No XLR balanced inputs or outputs; RCA-only connectivity may limit long-cable runs or compatibility with balanced professional equipment, based on spec analysis — users who require XLR connectivity should consider the ZP3 in the Fosi lineup
  • Rear-panel gain and bypass switches are small sliders that can be difficult to read by position in low-light environments, based on multiple reviewer reports
  • Pre-out subwoofer connection has no high-pass filter (HPF) to cut low frequencies from the main signal — meaning both the main speakers and the subwoofer receive the full-range signal unless the subwoofer’s own crossover handles the division, based on user feedback and product documentation
  • Remote control requires AAA batteries which are not included in the box, and the power adapter cable is relatively short, which may constrain placement flexibility depending on the desk layout, based on user and product documentation

Who Should Buy This?

The P4 has a clearly defined primary audience: anyone who owns a focused power amplifier — whether a Fosi V3, an AIYIMA A07, an SMSL SA300, or any other modern Class D or Class AB stereo power amp — and wants to connect more than one audio source without manually swapping cables, while gaining remote volume control. This describes an enormous number of people in the current audio enthusiast community. The specific pairing with the Fosi V3 is effectively purpose-made and is the most commonly described real-world configuration in user reviews: a V3 handling speaker driving, a P4 handling source management and volume, with matched aesthetics, compatible remote control, and complementary physical dimensions that create a seamless stacked or paired desktop system.

The P4 is also an excellent choice for the listener who has outgrown an all-in-one integrated amplifier and wants to migrate to a separates architecture without committing to expensive components across the board. Using the P4 as the preamp foundation alongside a dedicated power amplifier and a quality DAC provides a genuinely capable separates chain at a combined cost that competes favourably with mid-tier integrated amplifiers that lack the same degree of flexibility and performance.

Buyers who would benefit from considering alternatives include those who need XLR balanced connectivity, for whom the Fosi ZP3 — which adds XLR inputs and outputs with a high-pass filter on the subwoofer output — is the more appropriate choice at a modest step up in price. Listeners who primarily need Bluetooth input rather than analogue source switching would be better served by the all-in-one nature of an integrated amplifier with Bluetooth, such as the Fosi MC331. And listeners with a turntable who need a phono stage should note that the P4 requires an external phono preamp in the chain — the Fosi Box X2 or Box X5 feeds directly into one of the P4’s RCA inputs for a complete vinyl system. Among direct competitors, the Schiit Sys offers passive source switching without amplification at a lower price, while the AIYIMA P1 offers a similar all-analogue preamp approach with its own feature trade-offs.


Verdict

Score: 8.7 / 10 — Sonic transparency and performance (50%): 9 | Build quality (20%): 8.5 | Features and connectivity (20%): 8.5 | Value for money (10%): 9

The Fosi Audio P4 is the product the modern budget separates audio community asked for and got exactly right. Its measured performance is exceptional for the price — third-party SNR measurements of 114dB at the lowest gain position put it in company that costs several times as much. Its motorised analogue potentiometer is a genuine feature differentiator that changes how the listening experience feels daily. Its three-input architecture, tone controls with bypass, gain adjustment, and compatible remote make it a complete and practical control hub rather than a stripped-down compromise.

The recommendation is straightforward and strong: if you own a power amplifier without source switching or remote volume control — particularly if that amplifier is from Fosi’s V3 family — the P4 is the companion piece to buy. It was designed specifically for this use case with community input, and it delivers on every point of that specification cleanly and honestly. For first-time separates builders, multi-source desktop listeners, and anyone frustrated by cable-swapping in their current setup, the P4 is recommended without hesitation.

Fosi Audio P4 Mini Preamp with 3 RCA Inputs, Home Audio Stereo Pre amp for Amplifier/Active Subwoofer/Speakers, Preamplifier with 3-Level Adjustable Gain 3/6/9 dB, Bass and Treble Control
  • Mini Control Hub: The P4 supports up to 3 RCA inputs, allowing easy connection to CD players, streamers, DACs, cassette decks, and turntables with built-in phono preamp. Switch between sources with a click for seamless audio control
  • Practical and User-Friendly: Equipped with volume control, bass and treble adjustment with bypass function, three-level gain control, and a remote. The preamplifier offers convenient audio setup and optimization, making every listening session effortless
  • Motorized Potentiometer: Featuring a high-precision motorized analog pot, the P4 delivers smooth volume adjustment, reduced noise, and minimal distortion for a purer and more refined sound experience