KECES P8 Linear Power Supply Review
In fact, I can tell you that the P8 is effective without even testing it. What I need to test is just how good it is.
Why? I’ve been using linear power supplies for a long time. I already have KECES’s earlier DC-116 and DC-216 in service. The DC-116 provides 5V power to the USB expansion card of my computer source, and the DC-216 supplies 12V to my QNAP HS-251 NAS.
Additionally, my Audiobyte Hydra-Z DDC is powered by its own Hydra ZPM power supply, not the computer USB’s 5V.
I am very clear that the aforementioned linear power supplies (hereafter referred to as linear power) are significantly better than the included switching power supplies, so I am sure the P8’s effect is definitely noticeable. Even better, the P8 offers multiple voltage outputs and clear voltage displays, making it more convenient and reassuring to use.
Three Outputs, Five Voltages
Nowadays, many consumer electronics or 3C audio-visual products use external switching power supplies. Even some low-priced audio products use them, such as small DACs, phono preamps, turntables, multimedia players, streaming players, etc.

It’s not that switching power supplies are necessarily bad, but these products are low-priced, and to reduce costs, the included switching power supplies are certainly not very good, which limits the performance of the equipment and makes the sound deteriorate.
If you can replace it with a cleaner, more stable, and more adequate linear power supply under a reasonable price match, in most cases, you can get an immediate positive improvement effect.
Linear power supplies are good, but there is a big problem: most linear power products on the market only have one voltage output, but the equipment being powered has many different voltages. For example, some DACs are 12V, some multimedia players are 15V, and the network switch hub at home is 9V. If you buy a linear power supply for a certain piece of equipment today, it may not be usable for another piece of equipment in the future.
KECES considered this and equipped the P8 with two output zones, which can switch between four different voltages, plus an additional USB 5V output, covering almost all 3C products, greatly enhancing the applicability of the P8 itself.
Let’s take a direct look at the back panel of the P8.
There are Zone I and Zone II, each with a DC output jack. Next to the jack is a toggle switch that can switch the output voltage. Plus the USB 5V output, each P8 has three outputs and can output five voltages.
To avoid accidentally changing the output voltage and damaging the equipment, the switch is secured. You must pull up the handle to toggle it, so there’s no fear of accidental touches.
But, the printed words on the back panel do not indicate the voltage. How do you know what voltage it is switched to now? That’s the function of the panel display.

The P8 panel has a horizontal LED display, indicating the voltage and current of Zone I and Zone II. As long as you switch the back switch, the voltage displayed on the panel will change accordingly.
Therefore, the correct way to use the P8 is not to connect the output at the back before turning on the power. Instead, turn on the power first, check the panel to confirm that Zone I and Zone II are outputting the voltage you want, and then connect the DC power to the equipment.
Multiple Protection Circuits
Is it enough to output five voltages? KECES doesn’t think so.
To fully match the vast majority of 3C products on the market, the P8 has six models, four with dual outputs and two with single outputs. With voltage switching, it can provide a variety of different combinations (detailed voltage combinations are listed at the end of the article), covering all needs.
So why are there single-output models? To provide greater power and higher current.
For example, some audiophiles use Mac Mini or Intel NUC as their source, which, like laptops, consume DC power. Switching to linear power has an immediate effect on sound improvement, but the power consumption of Mac Mini or Intel NUC at startup is much higher than that of a general DAC or player. At this time, a single-output P8 is needed to ensure sufficient and stable power supply.

The P8 is equipped with a high-quality toroidal transformer inside, supplying two independent circuits.
Each output has 8 50V/2,200μF filter capacitors, its own fuse, and independent grounding. Each channel can provide up to 4 amps of output, and the single-output version can reach up to 8 amps.
Moreover, even the USB 5V output circuit is equipped with 2 35V/4,700μF filter capacitors, with an output of 1 amp.
Overall, the P8’s circuit is very sophisticated.
Not only that, but the P8 also has multiple protection circuits. If the output voltage or current exceeds the rated value, or if the temperature is too high, the protection circuit will be activated to stop the output, making it very reassuring to use.
The P8 sent for review is a dual-output version with 9V/12V and 12V/15V four voltage outputs.
I looked at the equipment I had on hand and immediately had three things to test, including the Brik DAC (12V), the newly acquired AURALiC Aries Mini wireless streaming player (16V), and a less commonly thought of item — the Switch Hub network switch (9V).

Let’s proceed to test them one by one.
From Dull to Lively
First, test the effect of the Brik DAC with the P8 in the U-Audio listening room. The equipment includes the Linear Acoustic LAV-60 MKII integrated amplifier and Dynaudio Contour 60 speakers, with a Windows laptop as the source.
Playing the “Bach Trios” album by Yo-Yo Ma, mandolinist Chris Thile, and double bassist Edgar Meyer, the timbre, texture, and frequency range of the three instruments are different. Although the volume and dynamic changes of the music are not large, it is a good material to test the liveliness of the system.
First, listen with the Brik DAC’s included switching power supply. The whole system sounds like straight lines, with relatively dull ups and downs. The sound lacks the necessary reverberation, making it monotonous and stuffy, and the timbre is dry and hard, quite unpleasant.
Then switch to the P8 to power the Brik DAC, and the musical expression immediately becomes lively. Not only does the timbre add a bit of luster, but the low-frequency tail’s swing also becomes clearer, with a sense of lingering reverberation.
In addition, the texture of the strings becomes more moist, the lines smoother, and the listening experience softer. Overall, the airiness, liveliness, naturalness, and fluidity all improve.

Switch to music with a sense of rhythm. I play the fifth track “All The World Envy” from Chris Botti’s “Night Sessions” album. At first listen, the low frequency of the switching power supply seems denser and tighter, with a strong impact from the bass drum. But after comparison, the P8 makes the texture and texture of the double bass plucking richer, more elastic, and more Q, with higher listenability.
In terms of price, the Brik DAC is about one-third the price of the P8. In terms of matching, the Brik DAC with the P8 seems disproportionate, but the P8 clearly makes this small DAC sound better and adds value to the Brik DAC.
More Attractive Sound
In the second stage, the listening scene moved to my home. I wanted to try the new AURALiC Aries Mini wireless streaming player with a linear power supply to see what kind of performance it would have.
At this moment, the preamp is the JE Audio VL10.1 tube preamp, the power amp is the NuPrime Reference 20, driving the Aurum Cantus Grand Harmony floor-standing speakers.
The answer is: the improvement is more significant than when the P8 was paired with the Brik DAC.
Why is it more significant? I don’t know. Perhaps the switching power supply included with the Brik DAC is better than that of the Aries Mini. But that’s not important. What matters is that the P8 makes the Aries Mini’s sound more attractive.

The Aries Mini is very powerful, capable of playing DSD256 format wirelessly via Wi-Fi, unmatched in the industry. However, limited by its size (it’s only slightly larger than an Apple TV), its analog output quality is not as impressive as its specifications. But with the P8, the sound has an obvious improvement, and the improvement is so great that even a non-audiophile can tell the difference.
What kind of improvement? Just like what was done to the Brik DAC, the P8 makes the originally rigid and monotonous sound more fluid, natural, lively, and rich, bringing more listening pleasure.
Effective on Network Switch Hub
The P8 has dual outputs, allowing me to conduct the next test without unplugging the 15V for the Aries Mini. I switched the other output of the P8 to 9V to power the Switch Hub network switch.
This Hub is located between the NAS and the wireless router. Music files stored in the NAS must pass through the Hub before being transmitted to the wireless router and then to the Aries Mini via Wi-Fi. Therefore, switching the Hub to a linear power supply should help the sound.
As soon as the sound started, there was another obvious improvement, and the airiness came too! Playing the jazz album “The Jazz Kamerata” by Latin musician Carlos Franzetti, the high-pitched saxophone and piano in the first track “Circle” lit up, with a light, lively sound, smooth and rounded lines, and more detailed sound, making the overall listening experience more natural, more like it’s alive and real.
Basically, compared to the included switching power supply, the change brought by the linear power supply is detail and naturalness, which in turn makes the originally dull and raw sound more fluid and lively, more musical and lively. The P8 is an outstanding example, especially with its dual outputs and multiple voltages, offering more flexibility in matching, allowing you to use it in the most advantageous link to maximize its effectiveness.
Equipment Specifications
- KECES P8 Type: Linear Power Supply
- Input Voltage: 110V-120V/60Hz, 220V-240V/50Hz (switchable)
- Power Consumption: 200 watts (full output)
- Output Voltage Models:
- Dual Output + USB Output:
- 5V/7V + 9V/12V with USB Output
- 9V/12V + 12V/15V with USB Output
- 9V/12V + 18V/19V with USB Output
- 9V/12V + 20V/24V with USB Output
- Single Output + USB Output:
- 9V/12V with USB Output
- 19V/20V with USB Output
- For other special needs, please contact KECES
- Dimensions: 300×66×220 mm (W×H×D)
- Weight: 6 kg