Klipsch RPA Atmos Ready Surround Sound System Review

Klipsch RPA Atmos Ready Surround Sound System Review


If you have a sufficient budget and enough space at home, what would you want to do? When this question is asked, the answers can be diverse. But if you’re an audio enthusiast and have the budget and space, what would you want to do? I believe many people would have the same answer as me: “Build a home theater!”

This audition took place at the Huanyu Digital branch in Taichung. On the first floor of the lobby, there is a “dream-level” small movie theater. Not only does it have good sound insulation and acoustic treatment, but it also has beautiful decor and a convenient environmental control system. If you plan to build an independent home theater in your home, this place is worth your reference.

Klipsch RPA Atmos Ready Surround Sound System Review

The viewing room has 11 seats, using dedicated home theater single-seat sofas. The reclining angle can be adjusted freely, and the armrests even have drink holders, providing a level of comfort far exceeding movie theater seats.

Impressive Home Theater Setup with Klipsch Reference Premiere Atmos Series

The day we visited, Huanyu Digital had prepared a full set of Klipsch speakers, with the main force being the Reference Premiere Atmos (RPA) series, including the RP-280FA floor-standing speakers and the RP-450CA center channel.

They originally planned to use the RP-140SA Atmos-enabled speakers for the surround channels. The RP-140SA can be placed directly on top of the main speakers, using ceiling reflection to create the height effect. They can also be wall-mounted as surround or rear surround channels.

However, the RP-280FA main speakers are already Atmos-enabled, and the K-525 Klipsch speakers were already fixed on the walls for the surround channels, so the RP-140SA was only displayed and not put into use.

For the subwoofer, they used two Klipsch KW-120-THX 12-inch subwoofers, with the KA-1000-THX amplifier, forming a 5.2-channel system.

Klipsch RPA Atmos Ready Surround Sound System Review

Klipsch’s Patented Tractrix Horn Design

Let’s first take a look at the main players, the RP-280FA floor-standers and the RP-450CA center channel.

Both belong to the RPA series, with a black cabinet and a reddish-bronze colored driver diaphragm, creating a stark contrast that has become their signature style. The front grille uses a magnetic attachment design, maintaining the panel’s flatness and aesthetics, and looks quite low-key and luxurious when placed in the living room.

In terms of driver design, both speakers use a 1-inch LTS titanium dome tweeter. The phase plug in front of the tweeter has been redesigned to enhance the high-frequency extension capability.

The tweeter is surrounded by Klipsch’s patented Tractrix horn. The original opening was 60° x 90°, and now the manufacturer has increased it to 90° x 90°, improving the dispersion performance of the horn.

Furthermore, the material of the horn has also changed, from the original ABS plastic to a die-cast soft silicone rubber. The manufacturer claims the advantage is that it can reduce resonance interference and decrease high-frequency distortion, making the high frequencies sound smoother and with better detail.

The midrange-woofer drivers use Cerametallic (ceramic-coated aluminum alloy) diaphragms. The aluminum alloy base is coated with ceramic, giving the diaphragm the characteristics of low mass, high rigidity, and appropriate damping.

They also use titanium voice coils, emphasizing more linear driver operation and stronger bass performance.

The RP-280FA has two 8-inch midrange-woofers, while the RP-450CA has four 5.25-inch midrange-woofers.

Klipsch RPA Atmos Ready Surround Sound System Review

The rear-firing port is a new Klipsch design called the Tractrix Port. From the outside, the bass reflex port has a rectangular horn shape, and unlike typical speakers, it doesn’t have an internal bass reflex tube. Klipsch claims this design can maximize efficiency and make the low-frequency response more agile.

Additionally, the RP-280FA is an Atmos-enabled speaker, so there’s another driver on top of the cabinet, firing upwards at an angle to create the Atmos surround effect through ceiling reflection.

This Atmos driver uses a 1-inch LTS titanium dome tweeter and a 4-inch Cerametallic midrange-woofer.

High Efficiency and Easy Amplifier Pairing

The 5.1-channel system is powered by a Sony AV receiver. Huanyu Digital had two models prepared, the STR-DN1050 and the STR-DN860.

The STR-DN1050 has a higher output power of 165 watts per channel (6 ohms), while the STR-DN860 has 150 watts per channel (6 ohms). Both are reportedly current best-selling models.

However, for a space larger than 20 ping (66 sq.m) with high ceilings, can these sub-$3,000 receivers drive the system adequately? No need to worry, as the RPA series has the advantage of high efficiency. The typical home speaker efficiency is around 90dB, but the RP-450CA has 97dB, and the RP-280FA main speaker even reaches an impressive 98dB.

In other words, the RPA series is easy to drive, and you don’t need to look for high-end, high-power amplifiers. You can start with mid-range or entry-level receivers.

Crisp Two-Channel Sound with Excellent Resolution

In general, a multi-channel system at home is not only for watching movies, but also for playing music, so I usually start the audition with two-channel music listening, pairing with the STR-DN1050 receiver.

Overall, the system’s performance in two-channel mode is a bit more clean and airy, not as thick and full as the multi-channel mode. However, the depth and width of the soundstage are not inferior, and the detail retrieval capability is also excellent.

For example, in Yuja Wang’s performance of “Shostakovich: Piano Concerto No. 1,” her rapid and forceful playing, the speakers’ fast response doesn’t feel sluggish or muddled. The piano notes sound pure and lustrous, with the piano image solidly centered and the string section placed on the sides, the entire soundstage retreating at least a meter behind.

Klipsch RPA Atmos Ready Surround Sound System Review

Robust Bass and Focused Vocals

In addition to soundstage and detail, the system also has excellent sound cohesion. In the audiophile demo track “2015 Original Sound Selection” from the Hong Kong Audio Show, the first track is “How Could You Leave Us” by Jacky Cheung. His voice is clearly focused at the center, with a large vocal image, and even the slightest lip and mouth sounds are captured, thanks to the remarkable focus.

Moving to the second track “The Magnificent Seven,” the soundstage immediately opened up, with a width even exceeding the speaker boundaries. The low frequencies were also full and powerful. When I doubted if the subwoofers were turned on, I went up to check, and everything was fine – it was just the RP-280FA’s impressive low-end capabilities.

Switching to the STR-DN860 receiver, the Jacky Cheung vocal was slightly smaller in scale, the guitar accompaniment warmer, and the overall density still very good. For “The Magnificent Seven,” the soundstage remained expansive, but the low frequencies were relatively weaker, and the impact of the timpani was a bit less powerful.

On the Yuja Wang piano track, the note textures became softer and more gentle with the STR-DN860, but I want to emphasize that these are subtle differences only discernible through rapid A/B comparisons. It doesn’t mean the STR-DN860 has a significantly inferior sound performance compared to the STR-DN1050.

Enveloping Surround Sound Experience

Switching back to the STR-DN1050, let’s explore the multi-channel performance. First, I played the “Denon-Pure Audio Experience” Blu-ray music disc. In this mode, the sound became richer, with the piano notes in the second track “North Country II” sounding full-bodied and rounded, while still retaining a polished, detailed treble.

The mellow horn section had a smooth, non-fatiguing quality, and the cello appeared in the surround channels, creating a strong sense of sound envelopment.

Moving to the third track “String Quartet op.76 no.5,” the density and energy of the strings were remarkably high. The fast tempo had an attacking quality, but it never sounded harsh or shrill, even at high volumes. This expansive, powerful musical presence is something small-scale systems would struggle to achieve.

The fourth track “Colorazione” was quite interesting. On this system, the soundstage was extremely open and deep, with various sound effects continually circulating around the listening position. If the system’s surround capabilities were not good enough, the sound effects would not flow smoothly. This system not only allowed the sound to move naturally, but its excellent resolution also let me detect more sonic details. In the short 2-minute-plus duration, from the initial stormy conditions to the final tranquil calm, I was completely immersed in the strong contrasts of the music.

Authoritative Performance with Large-Scale Compositions

I then switched to a large-scale composition, Beethoven’s Symphony No. 7 in A major conducted by Rattle and the Berlin Philharmonic. This RPA multi-channel system easily conveyed the scale and grandeur of the symphony orchestra, not just with sheer power, but also with the ability to precisely capture the musical details in the softer passages.

Klipsch RPA Atmos Ready Surround Sound System Review

The flute playing the main melody, followed by the full orchestral response, the strings spreading out in front of me, the energy and momentum building up, the clear delineation of the timpani texture and impact – the system handled the dynamics with ease, the layers of the music remaining cohesive and finely detailed, even during the powerful climaxes.

Powerful Performance with Thunderous Bass

After enjoying the music, let’s move on to movies. This is when the system truly unleashes its full potential. I started with a 2013 DTS Blu-ray test disc, including a segment from “The Hunger Games.” The system’s ability to create a truly immersive spatial experience was impressive – the jungle ambience with bugs and bird calls not only surrounded me on the horizontal plane but also had a convincing overhead extension, giving a vivid sense of being in the middle of the forest.

The rumbling low-frequency effects that followed, assisted by the dual subwoofers, were both forceful and fast-paced. The impact of the fireballs hitting their targets had the scale and shock value of a true cinema experience, but without any listening fatigue – it felt effortless.

I then switched to “Transformers: Age of Extinction” on Blu-ray. The dialogue had a weighty, substantial-quality, and the character voices were rendered with a huge, commanding presence, perfectly matched to the over 150-inch projected image.

In the later battle sequences between the Autobots and Decepticons, the low-frequency effects were powerful and punchy, without becoming bloated or overshadowing the rest. The speed and rhythmic clarity were superb, making the action scenes incredibly engaging.

Klipsch RPA Atmos Ready Surround Sound System Review

Considering the equipment’s price point, the setup Huanyu Digital had on display was not exactly luxurious (though not entry-level either). Even the receivers were only mid-range to entry-level models, yet when deployed in this large listening space, they were still able to deliver such robust musical energy and refined sound quality. For movie viewing, the system truly unleashed its full fire power, leaving a lasting impression. If you’re planning a multi-channel setup, I’d recommend adding this system to your consideration list.

Equipment Specifications

Klipsch RP-280FA

  • Type: 2-way, 3-driver, bass-reflex floor-standing speaker
  • Drivers: 1-inch Titanium LTS Vented Tweeter x1, 8-inch Cerametallic Midwoofer x2
  • Frequency Response: 32Hz-25kHz (±3dB)
  • Sensitivity: 98dB
  • Impedance: 8 ohms
  • Power Handling: 150 watts (600 watts peak)
  • Crossover Frequency: 1.75 kHz
  • Dimensions: 43.0 x 10.5 x 19.0 inches (H x W x D)
  • Weight: 71.7 lbs

Atmos Enabled Drivers:

  • 1-inch Titanium LTS Vented Tweeter x1, 4-inch Cerametallic Midrange x1
  • Impedance: 8 ohms
  • Crossover Frequency: 2 kHz
  • MSRP: $3,350

Klipsch RP-450CA

  • Type: 3-way, 5-driver, bass-reflex center channel
  • Frequency Response: 58Hz-25kHz (±3dB)
  • Drivers: 1-inch Titanium LTS Vented Tweeter x1, 5.25-inch Cerametallic Midwoofers x4
  • Power Handling: 150 watts (600 watts peak)
  • Crossover Frequencies: 500Hz, 1.5kHz
  • Sensitivity: 97dB
  • Nominal Impedance: 8 ohms
  • Dimensions: 6.8 x 31.1 x 14.5 inches (H x W x D)
  • Weight: 35.7 lbs

Klipsch RP-140SA

  • Type: 2-way, 2-driver Atmos-enabled speaker
  • Drivers: 1-inch Titanium LTS Vented Tweeter x1, 4-inch Cerametallic Midrange x1
  • Impedance: 8 ohms
  • Power Handling: 50 watts (200 watts peak)
  • Crossover Frequency: 2kHz
  • Dimensions: 7.0 x 6.0 x 11.2 inches (H x W x D)
  • Weight: 7.5 lbs
  • MSRP: $760