NuPrime Omnia WR-2 with STA-100 Review
Are you looking for compact audio equipment that doesn’t take up too much space? NuPrime’s newly launched Omnia WR-2 and STA-100 power amplifier are the “elf-class” ultra-mini system you should consider.
Just how small are they? To put it simply, they are palm-sized.
To be a bit more imaginative, their footprint is roughly A6 size, about the size of an A4 sheet folded in half and then in half again.
Small enough for you? That’s why I call them an ultra-mini system.
Feature-Rich Omnia WR-2
Furthermore, this ultra-mini system is packed with features. These two devices can handle almost all your music listening needs, like magical elves.
Just how powerful are their features? Let’s start with the Omnia WR-2 (hereinafter referred to as WR-2).
This is the successor to NuPrime’s previous WR-1, boasting even richer functionalities and a broader range of applications.
The WR-2 itself is a streaming player with a built-in DAC, featuring volume control and a headphone output.
For digital inputs, the WR-2 is equipped with an RJ45 network input, a USB Type-A port, coaxial and optical S/PDIF inputs, and an RCA analog input, along with Bluetooth – all features inherited from the WR-1.
However, the WR-2 goes further by adding an HDMI input with ARC (Audio Return Channel) support, allowing connection to a TV. The manufacturer even includes an HDMI cable in the accessory package, so users shouldn’t miss out on this practical feature.
Additionally, the WR-2 introduces a new function: a Sub out subwoofer output. This allows users to connect an active subwoofer to enhance overall sound performance.
Versatile Streaming and Multi-Room Control via App
The built-in ESS DAC chip supports sampling rates up to PCM 24bit/192kHz.
It supports a wide range of streaming platforms, including popular services like Spotify, Tidal, Qobuz, Deezer, Amazon Music, and Napster. Open the NuPrime Omnia App, and they are all listed clearly at a glance.
Internet radio stations are also readily accessible.
As for UpnP and DLNA functionalities, they allow direct access to NAS devices within the network for playing your own music files.
AirPlay 2 provides convenience for Apple users to stream any audio from their mobile devices.
Through the App, the WR-2 can also perform multi-room control playback, expandable up to 8 zones.
Headphone Output and Wireless Signal Transmission
On the front panel, there is an OLED screen in the center. Although not large, the screen displays information clearly. However, the information it can display is limited, and it cannot show current track information.
To the right of the screen is a multi-function knob. Rotating it adjusts the volume, a short press switches input sources, and a long press turns the power on/off.
On the left side of the screen, there is a small toggle switch. If you need to use Bluetooth, you need to flick it upwards.
Next to the toggle switch is the headphone output, a feature not found on the WR-1. When you want to listen to music late at night without disturbing family members, you can plug in headphones.
Besides the headphone output, another new feature of the WR-2 compared to WR-1 is its ability to act as a wireless transmitter. It can wirelessly transmit the input music signal to other wireless devices, including Bluetooth devices like Bluetooth speakers or other network streaming devices.
Compact Size with 100W Power Output
The WR-2 is small yet feature-rich; the STA-100 amplifier, also compact, delivers powerful output.
The STA-100 outputs 100W into 8 ohms and 150W into 4 ohms, easily driving most speakers.
On the rear panel, in addition to the left and right channel speaker terminals, there is also a set of RCA inputs.
Between the speaker terminals and RCA terminals, there is a small toggle switch to select the gain of the STA-100, offering three options: x15, x20, and x30. This is very convenient for users, providing flexibility in system matching and allowing for sound quality and timbre adjustments by tweaking the power amplifier gain and preamplifier volume.
Furthermore, it also has a Trigger out terminal for synchronized triggering, facilitating system integration applications.
Built-in Protection and Adaptive Voltage Switching Power Supply
According to the manufacturer, the STA-100 incorporates a high-speed gate driver, and through error detection and correction, achieves a distortion rate of only 0.005%.
Additionally, the STA-100 is equipped with protection circuits to prevent failures caused by short circuits, overload, overheating, and undervoltage.
The WR-2 is powered via an external power supply through a USB Type-C input.
The STA-100 has a built-in power supply and connects directly to the power cord.

Internally, it utilizes NuPrime’s proprietary “Adaptive Voltage Switching Power Supply.”
What is this? The manufacturer explains that the amplifier output signal of the STA-100 feeds back to the servo power stage of the power supply, allowing the supply voltage to change with the output of the power stage. What are the benefits? NuPrime openly states on its website: “This brings out more detail at low volumes and explosive energy at high volumes.”
Is this really the case? Let’s put it to the test.
User-Friendly and Feature-Complete NuPrime Omnia App
NuPrime’s Omnia App is quite user-friendly, offering high stability in use. I have not encountered any crashes (for iOS).
Moreover, its structure and logic are clear, making it easy to get started and very intuitive to use.

All functions can be operated on the App, and all supported streaming services, including radio stations, are listed within.
Since I only have one WR-2 unit, I couldn’t experience the fun of multi-room control. However, the initial page after opening the App lists all NuPrime network streaming devices currently on the network domain. Control of all devices can be handled via the phone App, which is very convenient.
Balanced Sound with Healthy Fullness and Ample Detail
How does this combination sound? I connected it to JMR Abscisse Jubile speakers and played music from Tidal. Whether using wired LAN or wireless WiFi, the connection was smooth, and there were no interruptions during use.
The sound of this system is remarkably clean, without any harshness.
This is quite rare for equipment at this price point.

The sound produced by the STA-100 has good fullness, and the detail retrieval is also quite ample, resulting in a very balanced presentation.
Even more impressively, when I first set up the system and turned it on, I habitually put my ear close to the drivers to check for background noise.
Initially, I thought I hadn’t turned it on. Only after playing music did I confirm that everything was connected correctly. Their strength lies here: I could barely hear any background noise – no hiss, no hum, nothing at all. It’s quieter than any NuPrime amplifier I’ve heard before.
Clear Layers and Vivid Soundstage
When playing “Christmas in Norway,” a Christmas choral album, the spatial ambience of the church recording immediately emerged. The vocal sections of the choir were clearly layered, creating a very vivid soundstage.
I turned the WR-2 volume up to 70 and above, and the soundstage remained well-controlled.

However, when playing some tracks with organ accompaniment, I noticed that bass resolution became slightly less defined at high volumes. Turning the volume down a bit restored the balance.
Distinct Dynamic Contrasts
Listening to Herbert Blomstedt conducting the Leipzig Gewandhaus Orchestra in Schubert’s Symphony No. 8, the first movement features not only the famous opening bass string motif but also intermittent bass string embellishments throughout.
When reproducing these low frequencies, the STA-100 delivered ample bass quantity, though the bass resolution was slightly lacking, which is a minor drawback.
However, this is in comparison to NuPrime’s own higher-end amplifiers. Compared to similarly priced amplifiers on the market, the STA-100’s ability to produce this level of bass while maintaining the balance of the musical structure is quite remarkable.
I felt that the STA-100’s resolution in the mid and high frequencies was much better, capable of delineating the layers and details within the music.

Therefore, both the aforementioned choir and the orchestra heard here were presented with a well-organized and layered soundstage.
Moreover, the NuPrime ultra-mini system effortlessly reproduced the dynamic contrasts between Schubert’s sudden fortes and instantaneous pianos, making the music even more engaging.
Value Demonstrated with Hans Zimmer Soundtrack
Playing the “Top Gun: Maverick” movie soundtrack, skillfully adapted by Hans Zimmer, revealed an even richer and fuller sonic effect.
In the theme song, the electronic drum rhythms were clear with rounded transients.
Subsequently, suggestive notes and chimes emerged behind the drums, leading into the main melody.

As the theme melody built up repeatedly, the sonic impact became even grander and more encompassing.
The electric guitar entered with a thick texture, presenting a simple theme melody without the improvisational development of the original version.
This system managed to present the layers and structure of this music so clearly. Listening further to “Darkstar,” with its fast-paced, repetitive string melodies layered with brass and bass in the background, the performance was truly outstanding value!
Clear Vocal Texture and Solid Imaging
Vocal performance is also impressive. In fact, I think this mini-system’s vocal reproduction is the most commendable aspect.
It can reveal clear vocal textures, making it easy to discern the singer’s vocal characteristics.

The full and solid imaging is also very pleasing.
For example, in Billie Eilish’s single “Lo Vas a Olvidar,” Billie Eilish’s breathy vocals and various articulations and pronunciations were rendered very clearly.
I deliberately turned the volume down to below 20, and I could still hear ample detail. Even more surprisingly, the low frequencies were still present, and the drum sound in the chorus was still clearly audible.
It seems the manufacturer’s claim is true: detail remains rich even at low volumes.
Truly Ultra-Mini, But Don’t Underestimate Them
The performance of NuPrime WR-2 and STA-100 is indeed impressive.

Although they are very mini, you should not underestimate them.
The feature-rich WR-2 is more than capable of serving as a source hub.
Whether using coaxial to connect a CD player, optical to connect a TV set-top box, HDMI to connect a TV, or using Bluetooth or streaming to listen to music, the WR-2 is equipped with a variety of input terminals, waiting for users to explore.
The STA-100 fully demonstrates NuPrime’s expertise in Class-D amplification. This small unit delivers 100W of power. Buying another unit allows you to bi-amp, using separate amplifiers to drive the tweeters and woofers independently.
The sound, with its fullness, a touch of warmth, and a hint of sweetness, combined with solid imaging and clear detail even at low volumes, makes these components very appealing.
I reiterate: don’t underestimate them just because they are small, lightweight, and affordable. They are indeed ultra-mini, but they are also truly remarkable.
Specifications
**NuPrime WR-2**
* Type: Wireless Streaming Player
* Inputs: Line in, HDMI ARC, Optical, Coaxial, USB Storage, Bluetooth
* Outputs: Coaxial (USB-C), Line out, 3.5mm Headphone output
* Network Input: RJ45, Wi-Fi 2.4G / 5G
* Supported Transmission Functions: AirPlay 2, DLNA, UPnP, Spotify Connect, Tidal Connect, Qplay
* Supported Streaming Services: Amazon Music, Deezer, iHearRadio, Napster, QQ music, Qobuz, Spotify, Tidal, TuneIn …
* Dimensions: 151 × 51 × 136 mm (Width × Height × Depth)
* Weight: 800 g
**NuPrime STA-100**
* Type: Stereo Power Amplifier
* Output Power (Continuous): 100W @ 8 Ohms, 150W @ 4 Ohms
* Output Power (Peak): 125W @ 8 Ohms, 175W @ 4 Ohms
* Gain: x15, x20, x30 Three levels adjustable
* Signal-to-Noise Ratio: 90dB @ 1W, 10W, 100W
* Total Harmonic Distortion: <0.005% * Input Impedance: 47K Ohms * Frequency Response: 10Hz ~ 50kHz * Dimensions: 151 x 136 x 51 mm (WxDxH) * Weight: 1.8 kg