Okki Nokki One Record Cleaning Machine Review
As a long-time and loyal user of Okki Nokki record cleaning machines from the Netherlands, I was excited to discover the latest generation, the Okki Nokki One, at the recent Munich High End Show. This new version boasts several improvements, and crucially, accessories that were previously optional are now included as standard. Manufactured in the Netherlands and priced only slightly higher than the previous model, the Okki Nokki One represents exceptional value in today’s climate of soaring prices – truly a generous offering.
Okki Nokki One Standard Accessories
The Okki Nokki One comes complete with the following as standard:
* Okki Nokki concentrated record cleaning fluid (50ml)

* Microfiber record brush
* Power cord

* Stainless steel record clamp
* Black aluminum adapter for 7″ single records

* Record label protector
* Additional 7″ platter

* All-in-one vacuum arm (12″, 10″, 7″)
The included manual is quite detailed. Although the record cleaning process is generally intuitive, there are still some important points to note, so I recommend reading it. The manual can be downloaded in electronic format from the official website. The cleaning fluid is concentrated, and it is crucial to remember:

Do Not Use Directly
It must be diluted before use. You will need a spray bottle and 1000ml of purified water to dilute the concentrate, achieving a 1:20 ratio.
The record brush.

The waterproof record clamp protects the record label from getting wet. The central metal part can also be removed and used independently.
The lever on top allows you to select the appropriate record size for cleaning. This is a significant improvement over older models that required changing vacuum arms for different sizes. From left to right, the lever positions correspond to 12″, 10″, and 7″ records.

In the new model, all functions are integrated into this single control knob. This includes clockwise and counter-clockwise rotation (by rotating the outer ring left or right) and the vacuum suction activation switch (by pressing down in the center).
This is the drainage point. Remember that

it must be closed during cleaning
And crucially,
drain the water before it reaches the halfway mark
Otherwise, it can damage the record cleaning machine. Draining is simple: ensure the machine is not operating, remove the black soft rubber cap on top, and pull out the drain tube to start draining.

This unit is designed for various international voltages. The Taiwan version is 115V. Here, you can also see “Designed and made in Netherlands.”
Now, of course, it’s time to select a vinyl record for a practical test. The new vacuum suction operation is noticeably quieter than the previous model, especially in the high-frequency range. The manufacturer has virtually eliminated these higher pitched noises. In the photo, you can faintly see the older white model in the background on the left. For users with no prior experience, I recommend using a less important record to familiarize yourself with the process. Being already very familiar with the older model, I naturally proceeded directly to cleaning.

Main Cleaning Steps
* Place the record to be cleaned on the platter and secure the record clamp.
* Select clockwise or counter-clockwise rotation.
* Apply the diluted record cleaning fluid evenly onto the record, being careful not to use too much.
* Use the record brush to scrub the record. The brush is fixed in position and does not need to be moved, as the record is rotating. Approximately 2-3 rotations are sufficient.
* Set the vacuum arm to the correct record size, move it over the record, and activate the vacuum suction to dry the record. Approximately 2-3 rotations are sufficient.
* Stop the machine, move the vacuum arm outwards, and repeat the above steps to clean the other side.
* After use, remove the vacuum arm, and it can be stored on the platter.
Okki Nokki One Record Cleaning Machine – Specifications
* Designed and manufactured in the Netherlands
* Single control knob for simple operation
* Full-size 12″ platter with bi-directional rotation
* Record label-sized platter
* Record clamp protects labels and doubles as a 7″ single adapter
* Very quiet and powerful vacuum system
* Indicated waste fluid reservoir
* All-in-one full-size vacuum arm for 12 inch / 10 inch / 7 inch records
* Microfiber record brush
* One liter of Okki Nokki record cleaning fluid
* Beautiful dust cover included
* Overheat protection with automatic power shut-off for safety