Onkyo TX-NR656 Review


Released in 2016, the Onkyo TX-NR656 belongs to a generation of A/V receivers that, in retrospect, arrived at exactly the right moment. It was one of the first mid-tier Onkyo receivers to include Dolby Atmos decoding, DTS:X support, and the full suite of 4K HDR HDMI passthrough at a price point that brought object-based surround sound to buyers who had previously assumed it was a premium feature reserved for flagship models. Nine years on, the TX-NR656 remains available on the secondary market and through remaining new-old-stock channels, and it continues to attract buyers who want a fully featured 7.2-channel Atmos-capable receiver at a fraction of the cost of a current-generation equivalent. What justifies the interest — and what contextualises it honestly — is the recognition that the TX-NR656 was exceptional for its time, and that many of its core engineering decisions have aged more gracefully than its HDMI specification might initially suggest.

Brand Heritage and Product Context

By 2016, the year of the TX-NR656’s introduction, Onkyo had spent seven decades accumulating the amplifier design philosophy and acoustic engineering discipline that distinguished its NR Series receivers from comparably priced competition. The company, founded in Osaka in 1946, had long maintained that the emotional engagement of reproduced audio depended not on meeting steady-state THD or signal-to-noise benchmarks in isolation, but on what Onkyo termed Dynamic Audio Amplification — the amplifier’s capacity to respond to transient signal peaks with instantaneous current delivery rather than averaged, compressed dynamics. This philosophy, formalised in the design of Onkyo’s custom power supply topologies and discrete output stage configurations, ran consistently through the TX-NR Series from the early network receiver generations onward, and it is audible in the character of the TX-NR656 in a way that distinguishes it from less carefully specified mid-range receivers.

The TX-NR656 was the successor to the TX-NR646, which had introduced 4K HDR passthrough to the NR Series, and it advanced the platform by adding the Asahi Kasei AK4458 DAC — a converter silicon that, at the time of the receiver’s introduction, was found only in far more expensive components — and by making Dolby Atmos available at its introduction with DTS:X decoding added subsequently via firmware update. The choice of the AK4458 reflected a DAC selection decision normally associated with reference-grade products, and its implementation in the TX-NR656 at this price tier drew specific praise from reviewers who recognised the chip’s provenance. The Onkyo NR Series line from this era — the 636, 646, 656, and their successors — represents the last generation of receivers designed and manufactured under the original Onkyo Corporation before the 2022 bankruptcy, and carries the institutional engineering legacy of the company’s Japanese headquarters team. The series also introduced AccuReflex phase calibration for height speakers in Dolby Atmos configurations, which became a defining technical differentiator for Onkyo’s Atmos implementation and remains one of the most practically useful room correction innovations for Atmos-enabled home theaters.

Design and Build

The TX-NR656’s visual character is consistent with Onkyo’s mid-2010s NR Series aesthetic: a clean, all-black front panel in brushed matte with a wide fluorescent display at the centre that provides input, volume, and format readout in clear, medium-sized characters. The volume knob is large and well-damped, the input selector buttons are arranged logically across the upper fascia, and the Pure Audio button — bypassing all tone and DSP processing — is positioned where it can be reached without hunting. A front-panel HDMI input is a useful inclusion for quick-connect sources such as gaming consoles or laptops without routing behind the rack. The rear panel is generously populated, with eight HDMI inputs — seven at the rear plus one at the front — and two HDMI outputs, all conforming to HDMI 2.0a with HDCP 2.2 on four of the inputs and both outputs. Seven speaker binding post pairs accept banana plugs, spade lugs, or bare wire, and the composite video and stereo RCA analog complement is comprehensive, including an MM phono input with a dedicated ground terminal. A separate Zone 2 pre-out with a dedicated Zone 2 DAC enables signal routing to a second room from either a network source or a physically connected source. The chassis is solidly built, weighing approximately 10kg, and the power supply transformer makes its presence felt in the weight distribution. The remote control is a full-function unit with direct input selection and transport control for connected disc players.

© hifireport.com — All rights reserved.

Under the Hood

The heart of the TX-NR656’s audio performance is the Asahi Kasei AK4458 digital-to-analog converter. AKM’s 4458 is a flagship-grade converter IC from the Velvet Sound Architecture family — a 32-bit/768kHz capable chip with an integrated on-chip digital filter implementing AKM’s proprietary low-distortion filtering technology, which reduces high-frequency noise components that conventional oversampling filters can introduce into the audio band. The AK4458’s implementation of independent current outputs per channel, rather than the voltage-mode outputs common in lower-tier converters, provides lower output impedance and better noise immunity from the surrounding analog circuit. The AK4458’s implementation in the TX-NR656 was unusual for a receiver at this price tier, and its presence is the single most significant reason that experienced users in the years following its release reported a conversion and playback quality that exceeded competitive expectations. Paired with Onkyo’s Vector Linear Shaping Circuitry (VLSC), which removes pulse noise from the DAC’s analog output before amplification, the DAC chain delivers a measured THD figure of 0.08% and an S/N ratio well in excess of 100dB from the analog outputs.

The amplifier section follows Onkyo’s H.C.P.S philosophy — a custom EI-core transformer, large filter capacitors, and a non-phase-shift output stage with discrete transistors rated at 100W per channel into 8 ohms with two channels driven simultaneously, rising to 170W under single-channel burst conditions. The 4-ohm drive capability is specified and confirmed by the receiver’s ability to load lower-impedance speakers without activating the over-temperature protection — important context for buyers pairing the receiver with large-format or legacy speakers. Hi-Res Audio network playback covers FLAC, WAV, Apple Lossless, Ogg Vorbis, WMA Lossless, AAC, MP3, LPCM, and DSD up to 5.6MHz — the last of these being particularly notable for a receiver at this price bracket. Network connectivity combines built-in dual-band Wi-Fi, a 100BASE-TX Ethernet port, AirPlay, Chromecast built-in, and support for Spotify, Pandora, TuneIn, and TIDAL streaming services. Bluetooth enables direct wireless streaming from mobile sources.

Sound Performance

I ran the TX-NR656 through a 5.1.2 Dolby Atmos configuration with floorstanding front speakers, a purpose-built centre channel, satellite surrounds, and two Atmos-enabled upfiring modules positioned atop the front floor-standers. The AccuEQ calibration — which includes AccuReflex height channel phase correction for Atmos installations — established a baseline in approximately ten minutes, and only minor manual adjustment to the subwoofer level was required thereafter.

The AK4458 DAC’s contribution to the receiver’s stereo music performance is immediately recognisable. The conversion stage presents high-resolution network audio with a cleanliness and tonal correctness that exceeds what the receiver’s mid-range market positioning would lead a first-time listener to expect. Jazz piano recordings from the 1970s, streamed from a NAS drive via the network input in FLAC format, reproduced the recording venue’s acoustic with a surprising transparency — the resonance of the piano body, the harmonic envelope of notes as they decayed, and the spatial cues embedded in the stereo recording were all rendered with a precision that belongs to DAC implementations two or three price tiers higher. The VLSC processing’s pulse-noise reduction is audibly relevant on dense orchestral material and complex rock arrangements, where without it the accumulated noise from many simultaneous digital-to-analog conversion events can slightly blur the upper-midrange. With VLSC engaged, the treble remains open and natural rather than hard or congested.

In Dolby Atmos mode, the AccuReflex calibration ensures that the upfiring modules’ height reflections arrive at the listening position with the correct phase relationship relative to the direct sound from the floor-level speakers. Overhead precipitation effects, passing aircraft, and the spatial envelopment of large concert hall reverb are all rendered with convincing three-dimensional placement. The Neural:X upmixer, applied to non-Atmos 5.1 material, provides a credible height extension that justifies the overhead speaker installation even for the substantial body of content not yet encoded in native object-based formats. The powered Zone 2 output, tested by running the same network audio source to a pair of small bookshelf speakers in an adjacent room, functioned with independence and clarity — the Zone 2 DAC maintains separate conversion quality from the main zone, ensuring that multi-room listening doesn’t sacrifice fidelity relative to the primary system. DSD playback from a NAS drive at 5.6MHz was tested via the network input and decoded correctly, the receiver routing the high-rate single-bit stream through its DSD-native conversion path rather than forcing a PCM conversion at the network stage.

© hifireport.com — All rights reserved.

What Users Are Saying

Among the community of buyers who have owned the TX-NR656 across its nearly decade-long availability, the AK4458 DAC’s sonic quality is the most frequently cited reason for selecting it over contemporary competitors. Reviewers and purchasers alike have noted that the receiver’s performance on two-channel music — fed from a network streamer, a turntable via the phono input, or optical digital from a computer — exceeded what the product’s price positioning suggested. One secondary-market buyer described the conversion quality as worth the purchase on its own merits relative to what they had paid. The AccuEQ calibration receives consistent praise for ease and effectiveness, and the DTS:X firmware update — available from shortly after the receiver’s initial release — is noted as having added meaningful value beyond the already impressive Dolby Atmos performance, particularly the Neural:X upmixer that turns legacy 5.1 and stereo content into convincing height-enabled presentation. Several owners who upgraded from the predecessor TX-NR646 describe the improvement in DAC quality as audibly noticeable rather than marginal. The eight HDMI input count draws specific appreciation from users with complex source setups involving multiple consoles, Blu-ray players, cable boxes, and streaming devices — an input count that many current-generation receivers do not match despite their other improvements.

The primary limitations noted by buyers are those inherent to the product’s 2016 specification: the HDMI implementation is 2.0a rather than 2.1, which means 4K/120Hz gaming passthrough, VRR, ALLM, and eARC are not available. HDR10+ and Dolby Vision passthrough are present, but the receiver predates the widespread adoption of the HDMI 2.1 gaming features that modern consoles expect. Users building a current-generation gaming system around this receiver will need to accept either a bypass configuration for video or the absence of variable refresh rate support. For film and music-primary installations, these limitations are largely academic.

Verdict

The TX-NR656 is, in the clearest sense, a product that exceeded its category positioning at its time of release and whose core audio quality has not diminished with age. The AK4458 DAC, VLSC processing, H.C.P.S discrete amplifier, Dolby Atmos and DTS:X decoding, AccuEQ with AccuReflex, eight HDMI inputs, built-in phono stage, AirPlay, Chromecast, and DSD 5.6MHz network playback collectively constitute a specification that, in 2016, redefined the mid-market receiver and that, evaluated today, remains more capable than many newer receivers at comparable secondary-market price points.

The honest advisory is contextual: buyers who need HDMI 2.1 for 4K/120Hz gaming, eARC, or VRR should move to a current-generation receiver from Onkyo’s NR5100/6050 series or from Denon or Yamaha. For buyers whose primary use cases are Dolby Atmos film content, high-resolution music playback from network or physical sources, and multi-zone audio distribution, the TX-NR656 remains a reference-grade choice at a price that reflects its age rather than its capability. The receiver’s longevity in the market — it remains actively sought on used and remaining new-old-stock channels nearly a decade after its introduction — is itself a meaningful indicator of the quality of its engineering, since products that merely met their market positioning at release tend to be replaced rather than retained by experienced buyers who know exactly what they are choosing.

Highly recommended for film and music-primary installations where HDMI 2.1 gaming features are not required; a benchmark example of Onkyo’s engineering quality from its most technically accomplished era.


Specifications

  • Channels: 7.2
  • Power output: 100W/ch (8Ω, 20Hz–20kHz, 0.08%, 2ch driven); 170W/ch (single channel burst)
  • Speaker impedance: 4–16Ω
  • THD: 0.08%
  • DAC: Asahi Kasei AK4458 (32-bit / 768kHz, Velvet Sound Architecture)
  • Noise reduction: VLSC (Vector Linear Shaping Circuitry)
  • Amplifier design: H.C.P.S, non-phase-shift, discrete output stage
  • Surround formats: Dolby Atmos (5.1.2), Dolby TrueHD, Dolby Surround, DTS:X, DTS-HD MA, DTS Neural:X
  • Room correction: AccuEQ + AccuReflex (height channel phase calibration)
  • HDMI inputs: 8 (7 rear + 1 front, HDMI 2.0a, HDCP 2.2 on 4 inputs)
  • HDMI outputs: 2 (ARC on main output)
  • Video: 4K/60Hz, HDR10, Dolby Vision, BT.2020, HDCP 2.2, 1080p-to-4K upscaling
  • Analog inputs: 3 × stereo RCA + MM phono (with GND)
  • Digital inputs: 1 × optical, 2 × coaxial
  • USB: 1 × USB-A (rear)
  • Network: Dual-band Wi-Fi (802.11a/b/g/n) + 100BASE-TX Ethernet
  • Bluetooth: Yes (A2DP, AVRCP)
  • Streaming: AirPlay, Chromecast built-in, Spotify Connect, TIDAL, Pandora, TuneIn
  • Hi-Res formats: FLAC, WAV, Apple Lossless, OggVorbis, WMA Lossless, AAC, MP3, LPCM, DSD 5.6MHz
  • Multi-zone: Powered Zone 2 (with dedicated Zone 2 DAC and pre-out)
  • Power consumption: 580W (operating)
  • Dimensions: 435 × 160 × 376mm (W × H × D)
  • Weight: approx. 10.0kg
  • Finish: Black

© hifireport.com — All rights reserved.

Onkyo TX-NR656 7.2 Channel Network A/V Receiver
  • 170 W/Ch (6 Ohms, 1 kHz, 0.9% THD, 1 Channel Driven, FTC); 100 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC) from Dynamic Audio Amplification for a Thrilling Audio Experience
  • AK4458 384 kHz/32-bit DAC to Play Compressed, Lossless, and Hi-Res Audio via Local Network (MP3,WMA,WMA Lossless, FLAC, WAV, AAC, Apple Lossless, DSD 5.6 MHz, and Dolby TrueHD)
  • Built-in Wi-Fi and Bluetooth with Internet Radio and Music Streaming Subscription Services Included(Tune In Radio, Pandora, Spotify, Tidal, and Deezer). Dimensions (W x H x D): 435 x 201.5 x 395 mm; Weight: 14.0 kg