Perreaux Prisma 750 Power Amplifier Review
When thinking of New Zealand, beyond sheep, my impressions are often dominated by the “Lord of the Rings” trilogy, with its epic cinematic landscapes. However, when it comes to audio, only one brand comes to mind: Perreaux.
I remember hearing about Perreaux in the early days of my audio journey. Somehow, the brand disappeared from the market for quite some time until Sheng Kai reintroduced it, bringing the brand back to life in the Taiwanese market.

Feeling curious about this unfamiliar brand, I borrowed this heavyweight Prisma 750 monoblock power amplifier to audition in the HiFiReport listening room.
A Brand Established in 1974
Perreaux was founded in 1974, boasting over forty years of history and establishing itself as a venerable audio brand.
Initially focusing on amplifiers, the company has since expanded to a complete lineup including sources, DACs, amplifiers, speakers, and cables. However, my perception of Perreaux remains rooted in amplification.
How did the company develop? In 1974, they launched the 22-watt GS 2002 solid-state integrated amplifier. Over the next two years, they gradually introduced preamplifiers, power amplifiers, and speakers, primarily targeting the local New Zealand market while simultaneously serving both home and professional audio segments.

In 1976, Perreaux created a massive local PA system that accompanied one of New Zealand’s top ten bands, Ragnarok, on tour. This professional audio system weighed over three tons and delivered an impressive 900-watt mono output, demonstrating phenomenal musical power at rock concerts.
That same year, Perreaux received its first international order—a pivotal moment in the company’s development. To compete in export markets, they not only refined circuit design but also prioritized safety certifications.
Between 1977 and 1978, Perreaux became intrigued by MOSFET transistors, noting their sound quality remarkably close to vacuum tubes while enabling high-power amplifier design. They began investing resources in MOSFET amplification circuit research.
Breaking into the American Market
In 1979, Perreaux released their first MOSFET power solid-state integrated amplifier SA80B and power amplifier PMF2000—80 watts for the integrated and 200 watts for the power amp. Perreaux became one of the earliest adopters of MOSFET amplification technology.

Their large-power solid-state units, offering warmth reminiscent of vacuum tubes, attracted significant market attention and established the Perreaux brand.
Located in the sparsely populated New Zealand, Perreaux recognized the necessity of international market expansion. In the early 1980s, they entered the American market, showcasing products with the top two Hi-Fi distributors in New York. Their tremendous success opened product sales channels, and the substantial American market demand prompted continuous factory expansion, solidifying their position in the audio market.
While the original Perreaux company story highlighted many classic equipment models, I found myself unable to recall their appearances. What seemed missing was the human element—who founded Perreaux? Who managed to introduce this obscure New Zealand amplifier into New York’s top Hi-Fi stores? The story doesn’t reveal this, and I suspect either the original founders preferred to remain behind the scenes or the marketing department wanted to ensure the company’s sustainability beyond a single heroic figure.
However, among audio brands established in the 1970s like Audio Research, Dynaudio, Burmester, and Mark Levinson, even those whose original creative spirits are no longer with the company continue to shine internationally. Perreaux is certainly one of those companies that rode the wave of that glorious era. I’m intensely curious about who successfully propelled Perreaux from the southern hemisphere onto the global stage, though information remains elusive.

Substantial and Heavyweight High-Power Amplification
While I couldn’t uncover Perreaux’s human-centric narrative, a company surviving over forty years in the international audio market must possess extraordinary qualities.
Looking at the Prisma 750, it’s solidly built, embodying an old-school hardcore design. Traditionally, high-power amplifiers were expected to be large and heavy, and moving the Prisma 750 is no small feat.
Recalling an old Hong Kong “audiophile bible” that proclaimed “to master Hi-Fi, first master strength”—referring to the ability to move and position equipment—I couldn’t help but smile while examining the Prisma 750’s heavyweight design.
The Prisma series comprises three components: the Prisma SM6 MkII preamplifier, Prisma 350 stereo power amplifier, and Prisma 750 monoblock power amplifier. I suspect the Prisma 350 and 750 share similar circuit designs, with the 750 configured in mono mode and featuring full balanced amplification. If you don’t require extreme output power, the Prisma 350 should suffice.
While 750 watts seem more than double the 350 watts, the actual sound pressure increase is only around 10%—similar to automotive horsepower. A 500-horsepower sports car might accelerate faster and reach higher top speeds compared to a 250-horsepower car, but it doesn’t double the speed. Otherwise, 500-horsepower supercars would be flying down the road.
Design Philosophy Adhering to Tradition
The heavyweight chassis houses equally heavyweight internal components. The oversized toroidal transformer represents the power supply’s core for high output, and the Prisma 750 maintains a no-frills, traditional appearance both externally and internally.

Large transformers are paired with substantial power filtering, featuring capacitors resembling cola cans—a sight less common in recent years, replaced by clusters of smaller capacitors. While the total capacitance remains similar between large and multiple small capacitors, each approach has its merits.
Fewer large capacitor components reduce matching issues, though some argue that large capacitors charge and discharge more slowly, making a series of smaller capacitors potentially faster.
Both perspectives have merit. Audio circuit design always involves technical trade-offs, and Perreaux chose the traditional route. High-power amplifiers naturally require everything to be large, preserving maximum circuit working headroom and demonstrating effortless driving capability.
The Prisma 750 features a total filtering capacitance of 60,000µF.
Low-Power Class A Operation
The Prisma 750’s amplification circuit employs a “Hybrid Class A/AB” design, blending Class A and Class AB characteristics.
The first amplification stage uses bipolar transistors operating in Class A mode, reducing odd-order harmonic distortion. The output stage utilizes MOSFET amplification. Perreaux, a pioneer in MOSFET usage nearly forty years ago, still favors this technology. The Prisma 750 operates in Class A mode at 10 watts output, transitioning to Class AB as power output increases.
I surmise this involves a higher bias point setting, enabling Class A operation at low power and switching to the more efficient Class AB at higher power levels.
The amplifier’s traditional approach is evident in its conventional PCB board construction. I found no surface-mount technology (SMT), with all circuits using traditional through-hole mounting. The circuit board size and large electronic components contribute to the Prisma 750’s substantial weight and size.
Traditional elements include robust internal wiring and thickened copper foil on PCB boards. Perreaux maximizes internal electrical energy flow to achieve high current and high-power output.
Balancing Musical Thickness and Brilliance
For this review, the preamplifier was an Audio Research Reference 6, using full balanced connection to match the Prisma 750’s balanced circuitry. Using the ARC REF6, balanced connection definitely performs better, with output levels doubled, driving the Prisma 750 more comprehensively. Compared to unbalanced connection, the balanced approach feels more robust.
To maintain a fully balanced signal path, I used a PS Audio NuWave DSD with balanced output, an Audiomeca CD transport, and CC Admonitor Silver Preference speakers with a bass column.
With 750 watts of output power, the Prisma 750’s driving capability is remarkable, effortlessly driving the Admonitor and bass column. While high-power driving isn’t difficult, maintaining sound quality is challenging. The Prisma 750 excels here, presenting musical notes with substantial, dense granularity while maintaining bright, delicate mid-to-high frequencies.

Using various musical examples—from Nobuyuki Tsujii’s Mozart piano sonatas to Viveza Quartet’s Tango music and Marcus Miller’s bass performances—the amplifier consistently demonstrated exceptional speaker control, spatial rendering, and a ability to reproduce music with remarkable authenticity.
A Hidden Jade within the Stone
After extensive listening, I consider the Prisma 750 a hidden gem. Perreaux’s old-school approach manifests in its heavy, solid chassis and unassuming design. Beneath this modest exterior lies formidable driving power and control.
With 750 watts precisely controlling speakers, working accurately, and faithfully reproducing music, this is a high-power amplifier containing a musical gem—worthy of careful appreciation by music lovers who value inner substance.
Technical Specifications
- Type: Monoblock Power Amplifier
- Output Power: 750W (8Ω), 1300W (4Ω)
- Frequency Response: 20 Hz to 25kHz (+/- 0.25dB)
- Analog Input Terminals: XLR/RCA
- Signal-to-Noise Ratio: 100dB
- Maximum Output Current: 160A
- Damping Factor: Greater than 700
- Input Impedance: Unbalanced 22kΩ, Balanced 3.3kΩ
- Dimensions: 430 mm x 186mm x 497mm (WxHxD)
- Weight: 31 kg