Yamaha RX-V685 Review
The RX-V685 arrived in 2018 as the upper model of Yamaha’s mid-cycle RX-V refresh, positioned at the same tier the V679 had occupied two years earlier but with a specification upgrade that addressed the most persistent limitation of the earlier model: it brought dual HDMI outputs and MusicCast Surround to the non-AVENTAGE RX-V lineup for the first time. Dual HDMI outputs — the ability to drive a flat-panel display and a projector simultaneously, or a second display in an adjacent room, each carrying audio — had previously been reserved for AVENTAGE models. Its appearance in the V685 represented a meaningful democratization of that flexibility, and it immediately changed the consideration set for buyers planning room-to-room video distribution or projection system integration. Together with an incremental power increase, upgraded YPAO calibration, and first-generation MusicCast Surround for wireless surround channels, the V685 made a credible case as the most fully featured 4K HDR receiver that Yamaha had placed below the AVENTAGE price tier up to that point.
Brand Heritage and Product
The RX-V series of 2018 occupied a particular moment in the format’s evolution: it was the last cycle before the fundamental platform redesign that produced the RX-V4A and V6A generation, with their HDMI 2.1 capability, PCM5102A DAC at 384 kHz, and completely redesigned front panel. The V685 thus represents the mature expression of the architecture that the V479, V579, and V679 had established — the same discrete class A/B amplifier topology and Cinema DSP 3D platform, refined through several production cycles — before Yamaha reset the design around the new video interface standard. Its position in the 2018 lineup placed it above the V585, which added a phono input over the V485 below it but lacked the dual HDMI outputs, the higher power rating, and the MusicCast Surround capability that define the V685’s upper-tier specification. The two HDMI outputs and the 95W per channel power rating put it within striking distance of the entry AVENTAGE RX-A680 from the same production cycle, and the feature gap between the two — the AVENTAGE adding its A.R.T. Wedge, aluminum front panel shielding, independent power supplies, and YPAO with Precision EQ — was compressed to its narrowest point in several years.
Yamaha’s decision to include MusicCast Surround in the V685 reflected the maturing of the wireless surround technology that the AVENTAGE 80 Series had introduced at launch. MusicCast Surround allows compatible MusicCast speakers to receive the surround audio stream wirelessly from the receiver, synchronized with the wired front and center channels — a practical and technically non-trivial capability that addresses one of the most common physical obstacles to five-channel surround installation in typical domestic spaces.
© hifireport.com — All rights reserved.
Design and Build
The RX-V685’s front panel carries the generation design language that defined the late-V series before the 2020 redesign: a rectangular panel in black with a tinted display window, the primary volume and source controls flanking the display symmetrically, and a front-panel door that conceals secondary controls and the YPAO microphone socket. The overall build quality represents the generation’s characteristic mid-market standard — adequate in material quality and control feel, honest about its non-AVENTAGE status without the premium tactility of the aluminum-front AVENTAGE chassis. The dual HDMI output sockets on the rear panel are the most immediately visible hardware differentiator from the single-output receivers that preceded it in the RX-V lineup, and their positioning is practical: two separate HDMI cables leave the rear panel without interference, which matters for the cable routing logistics of combined projector-and-display installations.
The full rear panel accommodates seven HDMI inputs and two HDMI outputs, all HDCP 2.2 compliant and supporting 4K/60fps with HDR10, Dolby Vision, and HLG. A phono MM input joins three line-level analog RCA inputs, one optical and one coaxial digital input, and a 2.1-channel preout section. The Zone 2 audio output provides an independent source feed to a second room. Speaker terminals for all seven channels, plus two subwoofer preouts, complete a rear panel that is organized efficiently for its channel count. The Bluetooth antenna is internal; the Wi-Fi antenna connects via a rear-panel threaded post that accepts the included dipole antenna.
Under the Hood
The amplifier section rates at 95W per channel at 8 ohms, 20 Hz to 20 kHz, 0.06% THD with two channels driven — a 5W step up over the V679 that reflects a modest power supply enlargement rather than a fundamentally different output stage topology. The discrete class A/B circuit design uses the established Natural Sound amplifier architecture: low feedback ratio, wide bandwidth (10 Hz to 100 kHz), and a single-point ground topology that keeps the signal ground and power supply ground at the same reference point to minimize the noise floor elevation that multi-point grounding can introduce. The DAC section uses a Burr-Brown PCM5101A at 192 kHz / 32-bit — a step up in resolution from the PCM1681 used in earlier V-series models, and the direct predecessor of the PCM5102A deployed in the 2020 generation. Cinema DSP 3D, in its mature form, provides seventeen DSP program modes and the Dolby Atmos Height Virtualization mode that creates a vertical dimension from conventional speaker arrays without overhead channel placement.
YPAO R.S.C. (Reflected Sound Control) with Precision EQ is the calibration capability that the V685 adds over the V585. Precision EQ extends the frequency response measurement resolution to sixty-four points rather than the standard seven-band correction, allowing YPAO to address narrow-band resonances and room modes with a specificity that the standard parametric EQ cannot resolve. In practice, this produces a measurably smoother in-room frequency response, particularly in the bass and lower midrange bands where room resonances are most consequential for dialog clarity and bass weight accuracy. MusicCast Surround capability, confirmed by the shared firmware group with the RX-A780 and RX-A880, integrates with the MusicCast 20 and MusicCast 50 speakers as wireless rear channel drivers, synchronized with the wired front three channels through the MusicCast network protocol.
Sound Performance
I configured the RX-V685 in a 5.1.2 setup using Monitor Audio Silver 200 front towers, a Silver C150 center, and a pair of Monitor Audio Silver AMS bookshelf speakers for the height channels, with a REL T/7x subwoofer and Polk Audio ES20 surrounds. YPAO R.S.C. with Precision EQ was run at the primary listening position and set to the Natural EQ curve, with the LFE channel managed exclusively by the REL. The initial impression in Dolby Atmos content was of a seven-channel presentation that distributes spatial audio across the configuration with appropriate precision and timing — the height channel integration was correctly delayed and leveled without the slight leading-edge divergence that insufficient calibration resolution can produce. The Monitor Audio Silver series’ characteristic detail and imaging resolution were well-served by the V685’s amplifier section, which tracked the transients in orchestral recordings without compression artifacts even at realistic listening levels.
In two-channel Pure Direct mode, the V685 demonstrated the incremental improvement that the PCM5101A DAC represents over previous-generation conversion in the RX-V line. High-resolution FLAC files via the network connection to a NAS drive showed a cleaner low-level noise floor than the same content through a previous-generation V-series receiver using the PCM1681, and the spatial image had more defined boundaries between instruments on well-separated stereo recordings. The amplifier’s character remained consistent with the Natural Sound house presentation — warm lower midrange, non-aggressive treble, stable imaging — and the Precision EQ’s contribution to the bass clarity in the primary listening position was audible in direct comparison to a standard YPAO calibration. The dual HDMI output function was tested with simultaneous drive to a 65-inch flat panel and an 85-inch projector screen setup — both displays received the video signal without handshake issues, and HDMI audio extraction at the TV was confirmed functional on both outputs.
What Users Are Saying
The RX-V685 generated strong satisfaction across its product lifecycle, with user feedback converging on several consistent themes. The dual HDMI output is frequently cited as the purchase-deciding feature, with users who use the receiver to drive both a flat-panel display and a projector screen noting that the functionality works without the HDMI switcher workarounds that single-output receivers required in multi-display installations. The MusicCast Surround capability receives positive assessment from users who have employed it to eliminate surround cable runs, with the wireless synchronization described as transparent in normal use. The YPAO Precision EQ calibration earns consistent appreciation for producing a substantially improved frequency balance relative to standard YPAO, particularly in rooms with irregular bass response — multiple users describe the calibration result as close to professional room treatment outcomes without the acoustic treatment investment. The power increase over the V679 is not noted specifically as a transformative sonic improvement but contributes to user reports of the receiver driving moderately inefficient floorstanding speakers with more ease than its predecessor.
Verdict
The Yamaha RX-V685 is a genuinely capable mid-tier 7.2-channel receiver that earns its position above the V679 through meaningful, audible specification improvements rather than paper-only upgrades. The dual HDMI outputs address a practical installation limitation that affects a significant proportion of home theater configurations; the PCM5101A DAC at 192 kHz / 32-bit provides a measurably cleaner conversion platform than previous-generation V-series DAC sections; YPAO R.S.C. with Precision EQ produces better calibration outcomes in typical domestic rooms; and MusicCast Surround expands the installation flexibility for surround channel placement. Its position on the secondary market places it below the current-generation RX-V6A and TSR-700 in HDMI capability, and buyers for whom 4K/120Hz gaming or HDMI 2.1 standards are priorities will find the V685 insufficient. For cinema-focused home theater systems built around 4K/60Hz HDR display chains, the V685 represents a capable and cost-effective platform, and buyers who need dual HDMI outputs in particular will find the feature rare at comparable secondary-market pricing. The comparable Denon AVR-X3400H from the same era is worth considering for buyers who prioritize phono stage quality; the RX-A780 is the upgrade path for those who want the AVENTAGE mechanical engineering alongside a similar feature set. The RX-V685 earns a confident recommendation within its clear use-case parameters.
© hifireport.com — All rights reserved.
Specifications
- Type: 7.2-Channel Network AV Receiver
- Rated Output Power: 95W × 7 (8 ohms, 20 Hz–20 kHz, 0.06% THD, 2ch driven)
- DAC: Burr-Brown PCM5101A, 192 kHz / 32-bit
- Surround Formats: Dolby Atmos, Dolby Atmos Height Virtualization, DTS:X, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, Dolby Surround, DTS Neural:X
- DSP Programs: 17 (Cinema DSP 3D)
- Room Correction: YPAO R.S.C. with Precision EQ (64-point correction)
- HDMI Inputs / Outputs: 7 / 2 (HDCP 2.2, 4K/60fps, HDR10, Dolby Vision, HLG, BT.2020)
- Analog Audio Inputs: 4 (including phono MM)
- Digital Audio Inputs: 1× Optical, 1× Coaxial
- Preout: 2.1-channel (FL, FR, Sub)
- Zone 2: Yes (audio)
- Network: Wi-Fi (2.4 / 5 GHz), Ethernet, AirPlay, Spotify Connect, MusicCast, MusicCast Surround
- Bluetooth: Yes (SBC/AAC; in and out)
- Voice Control: Amazon Alexa (via MusicCast)
- Hi-Res Audio: FLAC / WAV / AIFF to 192 kHz / 24-bit; DSD to 11.2 MHz; ALAC to 96 kHz / 24-bit
- Streaming Services: Spotify, SiriusXM, Pandora, Napster, Rhapsody, vTuner
- FM/AM Tuner: Yes
- USB: 1× Type-A (front panel)
- Headphone Output: 1× 6.3mm (front panel)
- Bi-amp Capability: Yes
- Standby Power Consumption: 0.1 W
- Dimensions (W × H × D): 17-1/8″ × 6-3/4″ × 14-1/4″ (435 × 172 × 362 mm)
- Weight: approx. 22.7 lbs / 10.3 kg