Yamaha RX-V679BL Review
There is a generation of AV receivers, introduced roughly between 2015 and 2017, that represented the first full integration of four capabilities that now define the standard: 4K HDR HDMI pass-through, first-generation object-based audio decoding, wireless multi-room network audio, and Bluetooth with improved lip-sync management. Yamaha’s RX-V679BL, which arrived in 2016 as the upper-mid-range model in the RX-V series, combined all four of those capabilities in a single chassis built on the same discrete amplifier architecture that the brand had been refining through successive product cycles. It was, in its production year, a very well-specified receiver for its position in the market. It remains, in the used-equipment market where it now primarily circulates, a compelling platform for the listener building a home theater system whose display is not yet a 4K/120Hz gaming monitor and whose primary interest is cinematic and musical audio performance.
Brand Heritage and Product
By the time the RX-V679BL reached market, Yamaha’s RX-V series had been in continuous production for nearly two decades, and the engineering decisions that had accumulated through that history were substantial and well-tested. The Cinema DSP platform, which began as a novel use of binaural acoustic measurements from real performance spaces and had been refined through eight generations by the time the V679 was designed, was by 2016 a genuinely mature technology with a DSP library of seventeen program modes that drew on over a thousand hours of acoustic measurement data. The Natural Sound amplification philosophy — low feedback, wide bandwidth, discrete output stage with single-point grounding — had become a signature of Yamaha’s receiver line that differentiated the brand’s sonic presentation from the often harder and more forward character of competing mid-market receivers. The V679’s position in the lineup placed it above the V579, which shared the basic platform but with fewer HDMI inputs with HDCP 2.2 support, standard YPAO rather than YPAO R.S.C., and Zone B rather than Zone 2 audio capability.
The V679’s introduction coincided with Yamaha’s launch of the MusicCast multi-room wireless ecosystem, and the receiver was among the first generation of products to carry the MusicCast designation — a decision that proved consequential for its long-term usefulness, since MusicCast has been actively developed and supported through the years since, and MusicCast-capable receivers from 2016 continue to function as first-class nodes in current multi-room MusicCast installations. The Alexa voice control integration, added through a firmware update shortly after launch, similarly provided a useful upgrade path that extended the receiver’s practical relevance beyond its production year.
© hifireport.com — All rights reserved.
Design and Build
The RX-V679BL’s cosmetic design reflects the generation that preceded Yamaha’s current curved-corner aesthetic. The front panel is rectangular, with a horizontal symmetry organized around a central volume knob flanked by source selector controls, and a multi-line display behind a tinted window that presents input, mode, and volume information clearly at normal viewing distances. The front-panel door, a feature carried from the AVENTAGE-influenced design update of the late RX-V series, covers a secondary panel of direct input buttons and the YPAO microphone socket. The overall build quality communicates its mid-market positioning accurately — the panel materials are good without being exceptional, the control knobs have appropriate damping, and the speaker terminals at the rear are adequate for standard cable gauges including banana-terminated connections.
The rear panel is organized around the then-current HDMI standard: six HDMI inputs, including three with HDCP 2.2 support and five located on the rear panel plus one on the front, with a single HDMI output. Two optical digital inputs — one more than the V579 below it — and one coaxial digital input round out the digital source capability. Four stereo RCA analog inputs are supplemented by a moving-magnet phono stage, and the Zone 2 independent audio output provides a separated audio feed that can play a different source from the main zone simultaneously. The 12V trigger output and Remote In/Out connections address the custom installation requirement that the V579 omits. The binding post speaker terminals accommodate all seven channel outputs and the two subwoofer preouts, and while they are not in the same build quality tier as AVENTAGE terminals, they perform reliably with the cable types a seven-channel installation requires.
Under the Hood
The amplifier section uses Yamaha’s discrete class A/B topology, rated at 90W per channel at 8 ohms, 20 Hz to 20 kHz, 0.06% THD with two channels driven simultaneously. The output stage components — the bipolar output transistors, the driver stage resistors and capacitors — are selected through the same process Yamaha applies across the RX-V range, with a sound-tuning step that represents a design investment beyond what pure measurement optimization would require. The YPAO-R.S.C. (Reflected Sound Control) calibration system is the key differentiator between the V679 and the V579: rather than measuring only the speaker-to-microphone direct sound levels, R.S.C. identifies the early reflections that arrive from walls, floors, and ceiling within the first few milliseconds and applies correction to both the direct and reflected components. In a typical domestic listening room — a rectangular space with a flat ceiling and parallel reflective surfaces — this distinction produces a meaningfully different calibration result, particularly in the center and surround channels where early reflections most directly impair dialog clarity and surround imaging.
Dolby Atmos and DTS:X decoding are supported for configurations up to 5.2.2 with ceiling or height speaker pairs using the seven physical amplifier channels. The HDMI 2.0a input standard with HDCP 2.2 supports 4K/60fps pass-through with HDR and Dolby Vision and Hybrid Log-Gamma compliance — the display standard that was current when the receiver was produced and that covers the practical requirement of most HDR-capable 4K displays currently in use. MusicCast network streaming supports Spotify, SiriusXM, AirPlay, vTuner internet radio, DLNA from networked storage devices, and local USB playback, with a file format range that included FLAC 192 kHz / 24-bit — adequate for the high-resolution streaming catalog that was available in 2016 and remains so for most practical use cases.
Sound Performance
I placed the RX-V679BL in a 5.1.2 setup using Polk Audio Legend L600 front towers, a Legend L400 center, Polk S15e surround bookshelf speakers, and a pair of Polk Audio RC80i in-ceiling speakers for Atmos, with a REL T/9x subwoofer. YPAO R.S.C. calibration was run at the primary listening position and set to Natural EQ. The first impression in multi-channel Dolby Atmos content was of a capable and well-balanced cinematic presentation — the V679’s discrete amplifier topology drove the Legend L600s cleanly through high-level action sequences, and the overhead channel timing and level integration was appropriately seamless. Dialogue reproduction through the L400 center was clean and well-separated from the surrounding field, with the Dialogue Level Adjustment function providing useful fine-tuning for program material with recessed center channel mixing.
In two-channel Pure Direct mode with a good analog source, the RX-V679BL showed its Natural Sound heritage clearly. The midrange was organized and unfatiguing, with a warmth in the lower midrange — most audible on cello and baritone vocal recordings — that is characteristic of the low-feedback discrete topology rather than a deliberate voice. The treble was present and extended without hardness, and the soundstage width between the front pair was stable. Direct comparisons to the RX-A780 on the same source material confirm that the AVENTAGE’s independent power supplies and A.R.T. Wedge produce a measurably lower noise floor and a correspondingly more resolved low-level presentation — but the V679 does not embarrass itself in that comparison. The gap is audible on high-resolution acoustic sources at close listening distances; it is less relevant in the context of the multichannel cinema application that occupies the majority of the V679’s operating hours. Bluetooth playback via the improved implementation introduced in 2016 was reliable and stable, with better audio synchronization to video content than the single-chip Bluetooth of the previous generation.
What Users Are Saying
The RX-V679BL attracted strong user satisfaction at launch and has maintained its reputation through the years of secondary-market circulation that followed. The most consistent satisfaction themes are the sound quality at its original market position, the reliability of the YPAO R.S.C. calibration relative to the standard YPAO on the V579, and the MusicCast integration’s performance and expanding compatibility over the years since purchase. The Alexa voice control firmware update is noted appreciatively by users who have Amazon Echo devices in their listening rooms. The most common criticism in current user feedback is the absence of HDMI 2.1 capability, which is understood as a product-era limitation — buyers seeking the receiver for current gaming applications at 4K/120Hz cite this as a known constraint before purchase. A smaller group of users notes that some streaming service integrations have aged less gracefully than others as services have updated their API requirements, though Spotify Connect, AirPlay, and MusicCast remain fully functional.
Verdict
The Yamaha RX-V679BL is a mature, well-tested AV receiver platform that offers genuine value in the used-equipment market for buyers whose use case it fits. Its 7.2-channel discrete amplifier output, YPAO R.S.C. calibration, full Dolby Atmos and DTS:X decoding, MusicCast network audio with current ecosystem compatibility, phono input, Zone 2 independent audio output, 4K HDR pass-through with HDCP 2.2, and Alexa voice control add up to a receiver that performs its intended role capably and, in Yamaha’s typical pattern, reliably over extended service lives. The limit of its practical relevance is clear: 4K/120Hz and HDMI 2.1 are not available, and buyers building around current gaming consoles or next-generation display standards will need to budget for a current-era platform. For home theater applications built around 4K/60Hz HDR displays — which describes the majority of current consumer display installations — the V679BL performs with distinction and remains a confident recommendation in its secondary-market context. Comparable alternatives include the Denon AVR-X2300W and the Marantz SR6011 from the same production era, both credible platforms but without Yamaha’s MusicCast ecosystem depth and the discrete amplifier lineage of the Natural Sound design philosophy. Recommended for the appropriate use case.
© hifireport.com — All rights reserved.
Specifications
- Type: 7.2-Channel Network AV Receiver
- Rated Output Power: 90W × 7 (8 ohms, 20 Hz–20 kHz, 0.06% THD, 2ch driven)
- Maximum Power: 105W (8 ohms, 1 kHz, 0.9% THD, 2ch driven)
- Surround Formats: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, Dolby Surround, DTS Neural:X
- DSP Programs: 17 (Cinema DSP 3D)
- Room Correction: YPAO R.S.C. (single-point measurement)
- HDMI: 6 inputs (5 rear + 1 front, 3 with HDCP 2.2) / 1 output; 4K/60fps, HDR, Dolby Vision, HLG, BT.2020
- Analog Audio Inputs: 4 (including phono MM)
- Digital Audio Inputs: 2× Optical, 1× Coaxial
- Zone 2: Yes (independent analog source)
- 12V Trigger Output: Yes
- Remote In/Out: Yes
- Network: Wi-Fi, Ethernet, AirPlay, Spotify Connect, SiriusXM, vTuner, MusicCast
- Bluetooth: Yes (with Compressed Music Enhancer; improved lip-sync)
- Voice Control: Amazon Alexa (via firmware update)
- Hi-Res Audio: FLAC, WAV, AIFF, ALAC, DSD (via network and USB)
- FM/AM Tuner: Yes
- USB: 1× Type-A (front panel)
- Headphone Output: 1× 6.3mm (front panel)
- Bi-amp Capability: Yes
- Dialogue Level Adjustment: Yes
- Dimensions (W × H × D): 17-1/8″ × 6-3/4″ × 14-3/8″ (435 × 171 × 365 mm)
- Weight: approx. 22.7 lbs / 10.3 kg
- Works with Alexa for voice control (Alexa device sold separately).
- YPAO – Reflected Sound Control
- Dialogue Lift & Dialogue Volume