Audio Research REF 6+REF 250 SE Review_8
|

Audio Research REF 6+REF 250 SE Review


Unfathomable Powerhouse

Audio Research, the veteran American vacuum tube amplifier manufacturer with over 40 years of history, recently launched the REF 6 preamplifier. REF, short for Reference, signifies the REF 6 as the latest preamplifier in their top-tier Reference series. Its performance directly rivals the two-chassis Reference 10 preamplifier within the same series. In essence, as a single-chassis unit, the REF 6 stands as Audio Research’s most formidable preamplifier to date.

Audio Research and Dynaudio: A Supreme Pairing

Beyond the REF 6, HiFiReport generously included two monoblock power amplifiers, the Reference 250 SE (Special Edition). This limited edition version of the Reference 250 is second only to the Reference 750 monoblock power amplifier. Completing the system were Dynaudio Contour S5.4 floorstanding speakers. Dynaudio, a highly representative Danish speaker manufacturer, is renowned for its almost 100% Danish-made components, drivers, and cabinets.

Evolving Design, Refined Functionality

Last year, Audio Research introduced the Galileo G series, featuring a groundbreaking aesthetic that garnered significant attention. This new look, conceived by designers within the same group, infused innovative elements into Audio Research’s traditional industrial design. The REF 6 preamplifier and Reference Phono 3, launched after the Galileo series, also adopted this fresh design language.

The Audio Research REF 6 is fundamentally a pure analog signal preamplifier with a singular purpose, unlike the G series GSPre which incorporates additional functionalities. To achieve optimal sonic performance, the REF 6 boasts upgraded components in numerous areas, even increasing the number of vacuum tubes used.

The left and right knobs control input selection and volume respectively. Below them, six buttons in a row manage power, Menu, Menu confirmation (Enter), output mode switching (Mono), phase inversion (Invert), and mute (Mute). The Menu allows for settings such as auto power-off, viewing vacuum tube usage time, adjusting screen brightness, volume presets, input source name editing, and Processor Mode switching for use with surround sound processors.

The rear panel is densely populated with input and output terminals. To the far left are four sets of balanced inputs, followed by four sets of single-ended inputs. In the center-right, there is a recording output and two sets of main outputs, each offering both balanced and single-ended connections. On the far right are the power socket, RS-232 port, IR Input, and 12V Trigger Out.

Sound Quality as the Sole Focus

The creation of the Reference 6 was not merely driven by market considerations. Following the Reference SE series, new technologies allowed for another leap in performance. According to Mr. Warren Gehl, Audio Research’s sound research lead, the musicality and dynamics of the new Reference series now approach the level previously only attainable with the two-chassis flagship Reference 10 preamplifier.

The Reference 6 increases the analog circuit vacuum tube count to six, and features upgraded coupling capacitors, transformers, internal wiring, volume control circuits, display panels, power supply design, and chassis design. The circuit boards are also engineered for enhanced durability and longevity. The overall dynamic range is elevated, allowing even the most minute details to be clearly reproduced, while distortion is further reduced.

Lavish Internal Components

Opening the chassis reveals its inner workings directly. The review unit arrived with a special transparent high-temperature acrylic top panel from the factory, offering an unobstructed view of the internals. This demonstrates that manufacturers with extensive experience and technical prowess have no fear of imitation. Nevertheless, removing the top cover provides an even clearer look at the abundance of high-quality components within.

An internal view from above.

The voltage regulation section employs a Soviet-made SOVTEK 6H30P (smaller tube on the left) and a 6550WE (larger tube on the right).

Utilizing Premium Vacuum Tubes

For signal amplification, each channel uses three 6H30P tubes, totaling six. These are also supplied by SOVTEK. Audio Research’s choice of SOVTEK is driven by their ability to provide the fastest access to tubes, ensure stable supply, and guarantee delivery of the highest grade tubes from their production lines.

Thoughtful Product Management and Support

Beneath the vacuum tubes, hand-written serial numbers are visible. This is a detail of Audio Research’s product management. As each vacuum tube amplifier uses matched tubes with minuscule differences between them, when a tube ages or malfunctions and needs replacement, providing the factory with this serial number allows them to locate a tube with the same designation from their inventory for the customer.

While the usage hours may differ, this practice aims to ensure the best possible match for the replacement tube with the remaining tubes.

Balanced Power Circuit Design

The power supply section of the REF 6 is substantial. Vacuum tube amplifiers consume considerable power, and to achieve superior low-frequency performance, transient response, speed, and energy, a large-scale power supply design is essential. The REF 6 utilizes even higher quality capacitors and components compared to previous models, representing an overall upgrade.

The heat sinks used in the REF 6. The operating temperature of the REF 6 is notably high. During the listening session, proximity to the heatsinks revealed significant heat. It is not recommended to operate the unit without the protective cover.

Exceptional Driving Force, Limitless Energy

Upon powering up, the front panel displays the selected input source and volume level. The volume control offers 103 steps. During listening, a setting of no more than 40 was sufficient to fill the entire space. The driving force of this pre-power amplifier combination is truly impressive, offering ample headroom.

The REF 6 front panel highlights “High Definition.” Resolving power is often a point of criticism for vacuum tube amplifiers, but this system completely dispels such concerns.

High-Quality Metal Chassis, Innovative Vibration Isolation

The metal chassis of the REF 6 is a newly designed structure with enhanced vibration isolation for the base. The sides of the chassis feature Audio Research’s distinctive and elegant nameplates, significantly improving brand recognition. For photography enthusiasts, the equipment is clearly identifiable from any angle. The side view also reveals Audio Research’s recent emphasis on aesthetics.

The design is not only visually appealing, but the craftsmanship of the metal chassis is also exceptionally refined, comparable to products from Germany or Switzerland, renowned for their precision engineering.

The fit and finish of the rear panel are equally impressive. Attention to detail is a hallmark of top-tier High-End manufacturers. It’s important to note that Audio Research power cords require a 20A specification, unlike commonly used power cords. Remember this before purchasing the equipment, as your existing high-end power cords may not be compatible.

Reference 250 SE: A Potentially Ideal Companion

Accompanying the REF 6 were two Reference 250 SE monoblock power amplifiers and Dynaudio Contour S5.4 speakers. The Reference 250 SE is positioned just below the flagship monoblock power amplifier tower, the Reference 750. Two Reference 250 SE units deliver a substantial 250 watts per channel, while retaining the nuanced and delicate texture characteristic of vacuum tube amplifiers. With Audio Research’s expertise, this is undoubtedly an exceptional creation.

The Reference 250 SE version also features a different aesthetic compared to its predecessors. It adopts a monochromatic, high-quality metal chassis, an industrially styled output power meter, and simple small aluminum buttons. The rear of the unit incorporates new low-turbulence, silent cooling fans, presenting a refined and sleek industrial design. Internally, the Reference 250 SE utilizes KT150 vacuum output tubes and a power supply with 50% greater capacity than the previous generation.

The output is configurable for 4-ohm, 8-ohm, and 16-ohm speakers.

Internal view, showcasing eight KT150 tubes, two 6H30 tubes, and one 6550C tube.

Partnering with Danish Dynaudio Speakers: Guaranteed High-Level Playback

Dynaudio is a representative Danish speaker brand. The company maintains a high degree of in-house manufacturing, encompassing cabinets, components, hardware, and the soul of the speaker: the drivers. Dynaudio drivers are globally renowned and have a long history, even supplying premium drivers to other leading speaker manufacturers in the past. Today, Dynaudio continues its relentless pursuit of driver innovation.

New models are typically launched in conjunction with the development of new driver technologies. The Contour S 5.4 is the largest speaker in the Contour S series. Having previously experienced the S 3.4 from the same series, it’s clear that larger speakers offer inherent advantages. Whether in terms of sound pressure level or the ability to fill a room with sound, larger speakers simply achieve this with greater ease.

Dynaudio’s piano lacquer finishes are also handled in-house, matching the standards of Steinway pianos.

A top-down view of the Contour S 5.4 reveals two MSP woofers, one MSP midrange driver, and one Esotar2 tweeter. The silk soft-dome tweeter has always been a source of pride for Dynaudio, representing a core technological asset. It delivers wide high-frequency bandwidth, a smooth and non-fatiguing character, broad frequency response, precise sound, and low distortion. Most notably, it integrates naturally into the listening space.

The Contour S5.4 has a nominal impedance of 4 ohms. When pairing with Audio Research vacuum tube amplifiers, it’s crucial to select the amplifier’s output impedance to match the speaker impedance for optimal sonic performance. Dynaudio products with speaker terminals exclusively use high-quality WBT connectors from Germany, a rare instance of utilizing components not manufactured in-house by Dynaudio.

* **Audio Research REF 6 Preamplifier Specifications:** (Specifications were not explicitly listed in the article, so this section cannot be completed.) * **Audio Research Reference 250 SE Monoblock Power Amplifier Specifications:** (Specifications were not explicitly listed in the article, so this section cannot be completed.)

* **Dynaudio Contour S5.4 Loudspeaker Specifications:**
* **Type:** Floorstanding speaker
* **Driver Configuration:** Two MSP woofers, one MSP midrange driver, one Esotar2 tweeter
* **Tweeter:** Silk soft-dome
* **Impedance:** 4 Ohms
* **Terminals:** WBT