Mark Levinson No.5802 Integrated Amplifier Review
In recent years, Mark Levinson’s product lineup has undergone a process of refinement, emerging cleaner and more focused. The preamplifier range is now limited to the No. 523 and No. 526, while power amplifiers consist of just two models, the No. 536 and No. 534. Interestingly, there are three integrated amplifiers: the No. 5802, No. 5805, and No. 585.5. Beyond these, they offer two vinyl turntables, the No. 515 and 5105, and digital players covering CD and streaming needs – the No.
519 Audio Player (featuring ROON Ready, MQA) and the No. 5101 SACD/CD player (capable of reading SACD).
This product strategy clearly shows Mark Levinson closely aligning with current market demands. They embrace ROON, MQA, SACD, streaming, and vinyl, catering to a wide spectrum of audiophiles. Crucially, they’ve adjusted pricing downwards while maintaining the brand’s signature elegant aesthetics. Take the No. 5802, for example. Priced at less than $10,000, it falls within the reach of many audio enthusiasts. Paired with suitable speakers, it promises a path to happy musical enjoyment.
Looking back at Mark Levinson’s historically high-priced equipment, I see a brand that has truly grounded itself, recognizing the need to pivot away from the dead end of increasingly exorbitant prices. Instead, they are leveraging their core technology and craftsmanship to produce more affordable audio gear. The 5000 series is a direct result of this thinking, presenting integrated amplifiers that are virtually all-in-one solutions for the digital age.
The No. 5802’s exterior maintains the classic Mark Levinson look, featuring a substantial 10mm thick front panel with elegantly sculpted curved edges on either side. The left side houses the Input/Select knob, finished in white. The right knob controls volume and navigation within the menu system. A small display window sits centrally, flanked by two small buttons. The leftmost button is “Menu,” the center is “Standby,” and the rightmost is the headphone jack. The No.
5802’s headphone functionality is not an afterthought; it features a dedicated Class A headphone amplifier. If you own headphones, don’t hesitate to plug them in and enjoy.
Upon connecting the power cord, the red “Standby” light begins to flash slowly. Pressing it prompts a message on the display, asking you to wait as the startup sequence completes. Once ready, you can select your input source and adjust the volume to begin listening. For energy saving, the No. 5802 will automatically return to standby mode if no audio signal is detected for a certain period.
Moving to the rear panel, you’ll note the absence of analog input terminals – only digital inputs are provided. However, there is one set of analog output terminals. This means the No. 5802 can output a variable-level analog signal, allowing it to function as a preamplifier for driving a separate power amplifier. The level of this analog output is controlled by the No. 5802’s volume knob. Digital inputs include one AES/EBU, one USB 2.0, two optical, and two coaxial RCA.
In addition to these inputs, there are stereo speaker terminals and numerous auxiliary connections: a USB slot for upgrades, Ethernet, infrared remote input, RS232, and 12V trigger in/out for power linking. Furthermore, the No. 5802 incorporates built-in Bluetooth using Qualcomm aptX-HD technology, enabling wireless pairing with your portable devices for high-resolution audio playback through the amplifier. When using Bluetooth, ensure the input is switched to the BT setting.
Lifting the top cover reveals the hidden heatsinks, positioned on the left and right sides within the chassis. A substantial 500VA toroidal transformer sits centrally at the front. Behind the transformer are the various circuit boards. The transformer features separate windings for the left and right channels, providing independent power supply paths. Four 10,000uF filter capacitors per channel are strategically placed directly next to the power transistors.
The voltage gain stage circuitry is directly inherited from the No. 534, including two high-speed driver transistors operating in pure Class A. The power stage utilizes six 260V/15A power transistors per channel, delivering a robust 125 Watts per channel into 8 ohms.
The No. 5802 employs an ESS 32-bit DAC chip, compatible with PCM up to 32-bit/384kHz and DSD up to DSD256 (11.2MHz). Some audiophiles might judge the quality of a digital component solely by its DAC chip, but the truth is, DAC chips are commercially available and accessible to many manufacturers. The real differentiator lies in the design of the power supply for the DAC chip and the surrounding circuitry – that’s where the crucial engineering happens.
This is why digital components using the same off-the-shelf DAC chip can sound distinctly different.
The digital-to-analog conversion circuitry used in the No. 5802 is derived from Mark Levinson’s top-tier digital architecture, the Precision Link DAC, and is the latest second generation: Precision Link II DAC. The ESS Sabre 32-bit chip is merely one part of this comprehensive architecture. The No. 5802 offers seven selectable PCM filters and three selectable DSD filters. Crucially, it provides full MQA decoding capabilities. Whether streaming MQA via network or playing an MQA CD, the No.
5802 can decode it. If your CD player lacks built-in MQA decoding, you can connect its digital output to the No. 5802 to leverage the amplifier’s decoding capabilities. Upon detecting an MQA CD, the display will briefly show its format, such as 88.2kHz, 176.4kHz, or even 44.1kHz, though this information disappears quickly.
So, what secrets lie hidden within the “Menu” button on the front panel? Pressing the Menu button allows you to navigate through settings using the volume knob. Once you’ve selected an item, press the volume knob inwards to confirm. In essence, interacting with the menu involves three actions: pressing the Menu button (each press cycles through different main categories), rotating the volume knob to select, and pressing the volume knob inwards to confirm.
The main menu categories include Input, Volume, Power, Display, and Advanced. Each category contains numerous sub-settings. For instance, under “Input,” you’ll see all input terminals listed. For each input, you can configure settings like Name, Offset, PCM Filter, PLL Lock, Upsample (On or Off), DSD Filter, BT (Bluetooth) Name, and BT Pairing (Enable or Forget).
Note that DSD Filter settings only apply to DSD signals entering via the USB input, and the final two Bluetooth settings are exclusive to the Bluetooth input.
“Name” allows you to assign a custom name to each input from a built-in list (you cannot create arbitrary names). The list includes common options like CD, SACD, DVD, Blu-ray, DAC, EQ, etc. “Offset” compensates for potential volume differences between input sources, with an adjustment range of -12dB to +12dB in 0.5dB steps. There are seven selectable PCM filters: Apodizing Fast, Hybrid Fast, Brickwall, Fast Linear, Slow Linear, Slow Minimum, and Fast Minimum.
“Fast” filters typically have steeper slopes, while “Slow” filters exhibit less ringing in transient responses. “Linear” filters produce ringing both before and after transients, while “Minimum” filters only produce post-transient ringing, with no pre-ringing. “Hybrid” combines elements of both Linear and Minimum types. “Apodizing” combines Linear characteristics to reduce both pre- and post-ringing.
“Brickwall” represents the most stringent filtering, designed to eliminate unwanted high-frequency aliased signals. Frankly, remembering the precise meaning of these filter names can be challenging for the average user. The best approach is to experiment by listening and choose the filter that sounds best to your ears.
“PLL Lock” refers to the Phase-Locked Loop, a method used to synchronize the internal clock with the external clock of the source component. The factory default is set to “Normal.” If you’re connecting equipment with a particularly inaccurate clock source (like a TV set-top box, for example), you might choose “Wide.” “Upsample” allows you to turn upsampling on or off. If enabled, the No.
5802 will automatically upsample incoming digital signals to 352.8kHz (for 44.1kHz based streams) or 384kHz (for 48kHz based streams). This can enhance the performance of some 44.1kHz sources. Of course, some audiophiles believe upsampling is not beneficial and should be avoided, so the No. 5802’s menu gives you the flexibility to enable or disable it. “DSD Filter” is used to filter high-frequency noise from DSD signals, with selectable options at 47kHz, 50kHz, 60kHz, and 70kHz.
Goodness! That’s just the “Input” settings. What about the other categories? Don’t worry, the others are much simpler. “Volume” allows you to set the maximum volume limit, mute volume level, startup volume level, and Volume Taper. Volume Taper refers to the speed at which the volume changes when you rotate the volume knob, with three speed options to choose from.
Next is the “Power” setting. You can choose between “Standby” or “Auto Off.” “Standby” keeps the unit in a low-power state, while “Auto Off” automatically powers down the unit if no audio signal is detected for 20 minutes. There are three Standby modes: Green, Power Save, and Normal. “Green” is the most energy-efficient, shutting down almost all internal power except for remote control power-on and basic standby consumption.
“Power Save” retains power only for the logic control board, shutting down everything else. “Normal” turns off the display and mutes the power output stage but keeps the rest of the circuitry powered, allowing the unit to remain warm and ready for optimal performance quickly.
The “Display” settings are straightforward, offering “Auto Off” and “Timer.” “Auto Off” itself has On and Off options. If “On” is selected, the display window will turn off after 3, 5, or 10 seconds during playback. If “Off” is selected, this feature is disabled, and the display remains constantly illuminated. “Timer” simply lets you set the specific delay (3, 5, or 10 seconds) for the display to turn off.
The final category is “Advanced,” which includes settings for Firmware, Config, Network, Trigger, and Front IR. “Firmware” shows the currently installed firmware version. “Config” allows for locking, resetting, and configuring input and output settings. “Network” displays information related to your network connection. “Trigger” relates to the 12V trigger activation mechanism. “Front IR” enables or disables the front panel infrared remote sensor. Finally, there’s an “Amplifier Enable” option.
If set to “Off,” it disables the No. 5802’s power amplifier stage, leaving only the preamplifier and headphone amplifier active. The factory default is “On,” meaning the full unit is operational. Unless you specifically intend to use the No. 5802 purely as a preamplifier, you should leave this setting as “On.”
For my listening test of the No. 5802, I used my large, open-plan listening space. The CD transport was an emmLabs TSDX SE, connected to the No. 5802 via AES/EBU. I also used my collection of digital audio files. During the evaluation, I also played MQA CDs and MQA digital files. I rotated through three pairs of speakers: a pair of Sonus Faber Olympica Nova V, a pair of AER Momentum, and finally, a pair of DynamiKKs! Monitor 10.15.
The No. 5802’s 125-watt output proved more than ample for all three pairs of speakers, given that the Sonus Faber has a sensitivity of 91dB, and the other two pairs boast 95dB sensitivity. After extensive listening with these three speaker pairings, I can confidently say the No. 5802 is a truly neutral and balanced amplifier. This conclusion is drawn from the fact that I heard three distinct speaker personalities emerge, unfiltered by the amplifier. What does this mean? It means the No.
5802 acts like a glass of clear water. If you add yellow pigment, the water turns yellow. Add red, it turns red. Add blue, it turns blue. With an amplifier of this character, speaker selection becomes crucial; you must choose speakers whose inherent sound signature you genuinely enjoy.
Perhaps you find this observation odd. If the No. 5802 is so neutral, shouldn’t it allow any speaker to reveal its true character and sound good? How can I say careful speaker selection is still necessary? This is the subtle magic of component matching. A neutral amplifier doesn’t guarantee that every speaker pairing will sound excellent; rather, it ensures the amplifier isn’t *coloring* the speaker’s sound. In my experience pairing the No.
5802 with these three speakers, I found the Sonus Faber Olympica Nova V pairing to be the most pleasing, satisfying my expectations across the board. The AER Momentum pairing came second, though its high and midrange frequencies weren’t quite as rich and lively as the Sonus Faber, and its low frequencies were a bit fuller and softer.
When paired with the DynamiKKs!, frankly, the synergy wasn’t ideal. Much of the character I typically enjoy from the DynamiKKs! was diminished, and I felt the low-frequency quantity was insufficient compared to the other two pairings. While turning up the volume increased the bass presence, it also caused the midrange to feel overly prominent.
Based on this overall assessment, the pairing with the Sonus Faber Olympica Nova V was the most satisfying for me, and this review is based primarily on that configuration.
First, I should point out that the No. 5802 is *not* a network streamer. If you wish to listen to streaming services like Tidal or Spotify, you will need a separate streamer. The No. 5802 is purely an integrated amplifier capable of accepting digital sources. Secondly, the No. 5802 offers six digital inputs – it’s highly unlikely you’d need six separate digital sources simultaneously, so you’ll have plenty of connectivity. Furthermore, the No. 5802 provides the option to enable upsampling.
Regardless of the format of the incoming digital signal, it can be upsampled to either 352.8kHz (for 44.1kHz based signals) or 384kHz (for 48kHz based signals). This can potentially improve the performance of some 44.1kHz sources. Naturally, some audiophiles believe upsampling is not beneficial and should be disabled, which is why the No. 5802’s menu offers complete control over this setting.
Finally, the No. 5802 supports DSD up to DSD256 (11.2MHz). If your computer or NAS can output DSD files directly, the No. 5802’s display will show the corresponding DSD format. However, if your computer or NAS can only output PCM signals, the original DSD file will be converted to PCM before being sent, and the display will show the PCM format. For example, if your digital file is DSD256, but the No.
5802’s display shows 384kHz, it likely means your computer or NAS is already outputting a PCM signal.
During my time listening to the No. 5802, I noticed a fascinating phenomenon: recordings from the 2L label sounded particularly exquisite. Examples include “Tarchea,” “Ja, Vi Elsker,” “Consortium Vocal Oslo,” “Tartini Secondo Natura,” “Woven Brass,” and “Mozart Divertimento KV 568.” Those familiar with 2L digital files know their unique recording characteristics: exceptional clarity, transparency, beautiful tonal quality, and extremely high resolution.
However, if your audio system isn’t properly balanced, these very qualities from 2L recordings can sometimes sound sharp, thin, and cold, leading many to mistakenly believe 2L recordings are poor. Consider this: if 2L recordings were truly subpar, how could they have won so many Grammy Awards for recording quality? Are all those judges deaf?
Why did 2L recordings sound so exceptionally good when the No. 5802 was paired with the Sonus Faber speakers? The captivating detail, sweetness, and purity were particularly appealing. I reflected on this and concluded that neutrality is likely a key factor. The No. 5802’s sound is very neutral, without undue emphasis on any specific frequency band (high, mid, or low) or any strong inherent sonic signature.
While this neutral characteristic can sometimes make recordings with inherent quirks sound unbalanced and less engaging, when paired with a well-balanced recording, the No. 5802 faithfully reproduces the music’s original equilibrium, allowing its full charm to unfold.
However, I must reiterate that achieving this sonic characteristic with the No. 5802 requires careful speaker matching. Using the same 2L recordings with the DynamiKKs! speakers did not produce the same captivating effect as with the Sonus Faber. Why the No. 5802 couldn’t drive the DynamiKKs! to sound as good as the Sonus Faber is a mystery; it speaks to the profound complexities of audio component synergy.
It’s like a man meeting many women; perhaps only one has the personality he can spend his life with. Maybe he’s lucky and finds the right one quickly, much like the No. 5802 found its match in the Sonus Faber. Or, he might spend his entire life without finding a compatible partner, leading to a breakup (changing equipment) or a lifetime of mutual compromise (never hearing optimal sound due to poor component matching).
The No. 5802 exhibits excellent transient response, which is particularly evident when listening to jazz. Spinning Tsuyoshi Yamamoto’s latest release, “Live at Jazz is” (Venus Records), I could fully appreciate the force and ( – bounce/elasticity – sticking with elasticity here) of his piano keystrokes, the elasticity of the plucked bass strings, and the instantaneous attack speed of the snare drum, kick drum, and cymbals from the jazz drum kit. Beyond its fast transient response, the No.
5802 also possesses excellent musical liveliness, which was especially noticeable with 2L recordings.
The No. 5802 also excels in transparency. Not only is it transparent, but the music sounds incredibly clean. The decay of instruments within the recording space is clearly audible. Besides 2L recordings, I experienced the same feeling listening to recordings from the Channel Classics label. As with the 2L albums, I listened to DXD digital files, which are 352.8kHz/24bit. For example, listening to Tchaikovsky and Arensky’s “Serenade for Strings” created a sense of ethereal beauty.
That ethereal quality is a composite of transparency, cleanliness, and purity. With Ivan Fischer conducting the Budapest Festival Orchestra in Beethoven’s “Symphony No. 1, Symphony No. 5,” this ethereal beauty was further enhanced by incredible, delicate detail. The layering and inner voices of the strings, woodwinds, and brass were not only clear but truly comfortable to listen to.
While the No. 5802’s bass quantity isn’t the most abundant, its low-frequency resolution is exceptionally good. Comparing two CDs from Stockfisch Records immediately reveals its high-frequency resolution capabilities. Which two? “Old Gold” and “AYA Car Audio Test CD.” “Old Gold” is a 1979 recording, relatively early in Stockfisch’s history (founded in 1974). Recordings from this period differ from later ones; they have less low-frequency quantity and aren’t as deep.
The bass on “Old Gold” sounds sufficient yet clean. Later Stockfisch recordings became softer, rounder, and fuller-bodied. Spectral analysis shows increased low-frequency energy around 50Hz in these later recordings. The “AYA Car Audio Test CD” primarily features these later recordings. Listening to these two CDs through the No. 5802 immediately highlighted the difference in their low-frequency recording characteristics.
In fact, the bass character of these two Stockfisch albums is different again from Tsuyoshi Yamamoto’s “Live at Jazz is” on Venus Records. My point is, the No. 5802 can clearly differentiate the distinct low-frequency signatures of different record labels, demonstrating not only excellent bass resolution but also high discriminatory ability.
The Mark Levinson No. 5802 is like a bottle of true mineral water. It contains only the subtle, natural sweetness derived from natural minerals, devoid of any artificial flavors. Upon first taste, it might seem unremarkable. But once you become accustomed to it, you’ll find your palate’s ability to discern subtle flavors in food is enhanced – that’s its value. Through the No. 5802’s neutrality, you can enjoy the original beauty and character of various instruments and recordings.
If you prefer flavored beverages or crave intense, spicy tastes, this might not be the amplifier for you. Furthermore, the No. 5802’s price of less than $10,000 is very close to its original market price (referencing the NTD price). To experience the technological essence of a renowned brand at this price point, what more could you possibly ask for?
* **Model:** Mark Levinson No.5802
* **Type:** Digital Integrated Amplifier
* **Output Power:** 125 Watts per channel (8 ohms)
* **Digital Inputs:** 1x AES/EBU, 1x USB 2.0, 2x Optical, 2x Coaxial RCA
* **Analog Outputs:** 1 Pair (Variable Level)
* **DAC:** Precision Link II (ESS 32-bit chip)
* **PCM Support:** Up to 32-bit/384kHz
* **DSD Support:** Up to DSD256 (11.2MHz) via USB
* **MQA Decoding:** Yes
* **Bluetooth:** Qualcomm aptX-HD
* **Headphone Output:** Class A
* **Other Connections:** Ethernet, RS232, IR Input, 12V Trigger In/Out, USB (Upgrade)
* **Transformer:** 500VA Toroidal