NAD C388 Integrated Amplifier Review
NAD, a brand known for offering high-value audio equipment since its inception, has recently launched three Class D amplifiers in their mid-range C series: the C338, C368, and C388, priced at $930, $1,430, and $2,230 respectively.
Previously, Class D amplification technology was primarily used in NAD’s flagship M series products. The introduction of these three models symbolizes the democratization of Class D amplification technology.
Among them, the C338 incorporates Chromecast playback functionality, while the C368 and C388 can expand their playback capabilities through “MDC Modular Design” slots, once again demonstrating NAD’s philosophy of multi-functionality and high value-for-money design principles.
This time, NAD’s distributor Audio Supply has sent the C388 and C368 to our editorial department for evaluation, allowing us to experience the charm of NAD’s new generation integrated amplifiers.
NAD: The People’s Favorite in the Audiophile Circle
If you’re an audiophile with two or three decades of experience, hearing the NAD brand name will surely evoke fond memories of your youth.
Founded in London in 1972, this audio brand, under the guidance of chief engineer Bjorn Erik Edvardsen and operations manager Martin Boris, released a series of affordable yet capable equipment. The most notable among them was the 3020 integrated amplifier, whose excellent value and comfortable, enchanting British sound signature made it the first audio equipment for many young enthusiasts, occupying an unrivaled position in audio history.
Like many established brands, NAD faced challenges during the decline of the audio market and underwent ownership changes.
Today’s NAD is part of the Lenbrook Group, with headquarters relocated to Canada. However, this historically rich brand continues to maintain its practical, accessible product design philosophy and remains active in the market.
I believe this is not only due to Bjorn’s continued involvement in NAD’s product design but also because the Lenbrook Group owns speaker brand PSB and Bluesound, which specializes in wireless digital playback equipment.
PSB was founded by Paul Barton, who conducted long-term acoustic research at the National Research Council Canada, creating high-value speakers based on his research findings. Bluesound develops various Wi-Fi playback equipment and the “BluOS” playback software, allowing users to conveniently listen to Hi-Res and MQA files wirelessly.
As part of the Lenbrook Group, NAD can now share resources with PSB and Bluesound, creating synergies to develop equipment that meets current market demands. Examples include NAD’s previous HP series headphones and the D3020 DAC, which were well-received products developed for contemporary listening trends.
Rich Experience in Class D Amplification Technology

NAD not only closely follows market trends but is also a pioneer in using Class D amplification.
Let’s take a moment to understand what Class D amplification is.
According to Thomas L. Floyd’s textbook “Electronic Devices: Conventional Current Version” (2008), Class D amplification circuits first convert the input waveform into pulse-width modulated (PWM) signals that switch between “on” and “off” states. These PWM signals are then sent to a common-source amplification stage composed of two transistors (usually MOSFETs), each rapidly switching between “on” and “off” states, with one transistor being “on” while the other is “off.”
Theoretically, this design results in minimal power loss during signal processing, enabling the delivery of extremely high power.
Finally, the amplified PWM signal passes through a low-pass filter that removes excess harmonics, restoring the original waveform before being sent to the load (speakers in a stereo system).
Many people mistakenly assume the “D” in Class D stands for Digital and that the circuits are entirely digital, but this isn’t the case.
Although PWM signals have digital characteristics, Class D amplifiers can accept analog input signals.
The term “Class D” simply distinguishes it from Class A, B, and C amplification circuits.
Adopting Hybrid Digital Technology with Feedback Loop
The Class D amplification design used in the newly launched C388, C368, and C338 differs from the previously mentioned M series. Instead, like NAD’s D3020, they employ NAD’s proprietary “Hybrid Digital” technology.
This technology can be discussed in terms of two major components: the DAC circuit and the power amplification circuit.
First, these three units feature DAC circuits with a unique “Asymmetrical PowerDigital” circuit architecture designed by the manufacturer.
Unlike the common dual-differential circuit structure, the “Asymmetrical PowerDigital” DAC circuit architecture inverts the signal of one channel, which is then restored to its original polarity after power amplification.
The manufacturer claims this design effectively distributes the workload of the switching transistors in the Class D power amplification circuit, making the amplification circuit more efficient.

The C388’s internal circuitry includes the green circuit board on the right, which is the MDC BluOS-2 module, already installed when delivered to our station.
Regarding the power amplification circuit, NAD employs Hypex’s UcD technology, which directly converts analog signals to PWM signals for power amplification.
More importantly, NAD has added a feedback circuit to the UcD foundation to reduce distortion.
Feedback circuits have their advocates and critics. Proponents believe they can reduce total harmonic distortion, while opponents argue they increase transient intermodulation (TIM) distortion, resulting in a harsher sound.
In their technical white paper, NAD clarifies that excessive TIM distortion from feedback circuits is due to poor design, and feedback circuits are necessary in amplifiers.
NAD believes that with proper circuit design and moderate use of local feedback circuits, phase shift can be reduced while simultaneously lowering both THD and TIM distortion, achieving better results than designs without feedback.
The C388 uses two Hypex UcD Class D amplifier modules, while the C368 has only one.
The C388 employs a switching power supply.
Equipped with MM Phono, Bluetooth, and S/PDIF Inputs
After explaining the unique Class D amplification technology in these three integrated amplifiers, let’s relax and focus on the appearance and functionality of the C388 and C368.
The C388’s chassis is slightly thicker than the C368’s, but the display screen, knobs, buttons, and terminal configurations are almost identical.
For digital inputs, they both feature two S/PDIF RCA coaxial and Toslink optical inputs, plus a Bluetooth antenna socket for wireless music playback.
For analog inputs, both the C388 and C368 include two Line-In RCA terminals, and considering the vinyl revival trend, both amplifiers are equipped with an MM phono input, allowing users to directly connect turntables and enjoy vinyl playback.
The C388’s front panel features a 6.3mm headphone output jack.

Both the C388 and C368 have two sets of speaker terminals, allowing simultaneous connection of two pairs of speakers. Users can select which pair to activate via the remote control, making A/B comparisons more convenient for speaker enthusiasts.
In this output mode, the C388 can deliver 150 watts of continuous output power per channel (8 ohms), while the C368 delivers 80W (8 ohms). Additionally, the C368 features a “Bridge Mode” switch – when set to “MONO” mode, the Speaker A’s R- and L+ terminals become the left channel speaker outputs, while Speaker B’s R- and L+ terminals become the right channel outputs. This configuration allows the C368 to deliver more substantial power, reaching 300 watts per channel continuous output power at 8 ohms.
Furthermore, both integrated amplifiers feature headphone outputs, allowing users to enjoy music through headphones without disturbing others.
Digital Playback Functions Can Be Expanded Through MDC Modules
At this point, some readers might wonder: since the C388 and C368 already have DAC circuits built-in, why do their rear panels only have optical and coaxial digital inputs, but lack the more commonly used Type B USB and Ethernet ports for digital streaming? Remember, we mentioned at the beginning that the C388 and C368 feature MDC modular design, with two module slots reserved on the left side of their rear panels.
Currently, NAD offers three MDC modules: The “DD HDM-1” features HDMI ports for use with multichannel equipment; the “DD USB 2.0” includes Type A and Type B USB ports for playing digital audio files from external hard drives and computers respectively; and the “MDC BluOS,” designed by NAD’s sister brand Bluesound, features an Ethernet port and a Type A USB port for connecting Wi-Fi receivers.
When the C388 and C368 were delivered to our editorial department, the MDC BluOS was already installed in the C388. We’ll discuss its operation and sound quality later.
Agile Speed, Precise Positioning
First, I played “Abendsomme” from German harpist Evelyn Huber’s album “Inspire.”
Although this album has a serene musical style, it features rich instrumentation and audiophile-grade recording quality, making it ideal for testing sound background purity and sound positioning.
Through this system, I could clearly perceive the precise positioning of the wind chimes, flute, and harp at the beginning of the piece. The soundstage extended from about 50 centimeters in front of the speakers all the way back beyond them, with width exceeding the speaker placement. The sense of space was complete, without any dispersion or hollowness, which impressed me greatly.
Class D amplification often carries the stereotype of having a cold tone and lacking musicality, but listening to this piece, I didn’t notice these shortcomings in the C388.
The various instruments had clean, crisp edges to their forms. The wind chimes, rich in high-frequency content, seemed to emit a crystalline radiance rather than the harsh glare of car headlights. Through this system, I could clearly hear the various instantaneous details of fingers sliding across harp strings. In a passage where the violin imitates birdsong, despite the subtle sounds, the voice lines maintained delicate curves and clear edges without becoming rough. The slowly struck drums exhibited appropriate hardness and texture, with bass that could reach extremely deep while maintaining a comfortable listening experience.
In summary, listening to this piece through this system allowed me to immerse myself in its comfortable atmosphere, completely forgetting that the C388 was a Class D amplifier.

Next, I played “All Or Nothing At All” by the John Coltrane Quartet from their album “Ballads.”
Through this system, I could feel the clear positioning of the double bass, jazz drums, piano, and saxophone.
More importantly, I found excellent interaction between the C388 and the Dynaudio Contour 60. During the jazz drum solo at the beginning of the piece, the drums had appropriate hardness and sufficient force, with remarkably quick response, fully presenting the spontaneous inspiration and emotional fluctuations characteristic of jazz.
As for the lead saxophone, listening through this system revealed not only a broad form but also extremely high density in sound texture, producing a sound that was both soft and powerful.
I believe the Dynaudio Contour 60’s thick, warm tonality gave the saxophone its broad form, while the C388’s driving force and density added weight to the saxophone’s sound.
Extraordinary Driving Power
Later, I played the Chaconne from the third act of Mozart’s opera “Idomeneo” performed by Rene Jacobs.
This recording has a very spacious ambiance, and through this system, I could clearly feel that both the width and height of the space were much greater than in the previous two pieces. The orchestra’s rhythmic, spirited performance came through with quick response, and the musical lines carried some thickness and warmth. Particularly during the forte passages when the timpani joined in, the sound delivered through this system was energetic and had quick attack and decay, allowing me to directly experience the characteristic lightness of Mozart’s operas.
During the “Larghetto” movement, the tempo slowed down and the piece exuded a pastoral atmosphere. Under the combined interpretation of the C388 and Dynaudio Contour 60, the rhythm remained lively and the atmosphere vibrant, with the string section being particularly smooth without any noticeable cold edge to the sound.
Finally, I played “Year 2000” from the Scottish post-rock band Mogwai’s album “Come On, Die Young.”
This song employs rich sound effects that add a lively, playful quality to the suspenseful main melody.
Through the combined interpretation of the C388 and speakers, the cymbal textures were delicate, like golden powder scattered across the space in front of the speakers, while the drum rhythm that runs throughout the song had amazing power, making my heart pulse along with the beat.
As for the slightly lazy electric guitar melody interweaving with the peculiar sound effects that appear throughout the song, the system’s playback revealed clear front-to-back layering and strong transparency, without any sense of the sound image being too flat or crowded, clearly placing me within the imaginative world that Mogwai created with their notes.
MDC BluOS-2 Setup Different from Standard DLNA

After listening to the C388 paired with the North Star Design Model 192 MK II CD player, let me discuss the operation experience and sound quality of the MDC BluOS 2 module.
This network streaming module, developed with technical support from NAD’s sister brand Bluesound, features not only an Ethernet input port but also two Type A USB ports. These allow connection of both the included Wi-Fi USB module for wireless music playback and external hard drives or USB drives for direct music playback.
Additionally, the MDC BluOS 2 module includes a Bluetooth receiver antenna socket and supports the aptX transmission format, giving CD-quality audio files a chance to avoid lossy compression when transmitted via Bluetooth, preventing audio degradation.
Through LAN connection and external hard drive playback, MDC BluOS 2 supports sampling rates up to 24 bits/192 kHz. Besides common file formats like WAV, FLAC, and ALAC, it also supports the “MQA” Hi-Res Audio compression technology that has been generating much discussion in Europe and America recently.
Tidal’s “Tidal Master” uses the MQA format for transmission. Regular players that don’t support MQA will only process the signal at 44.1kHz/16 bits or 48kHz/16 bits, but through MDC BluOS 2, MQA signals can be restored to Hi-Res Audio format, giving users the opportunity to hear streaming audio with richer resolution.
Seeing the Ethernet port on the MDC BluOS-2 and its Wi-Fi support, many might assume it uses UPnP/DLNA communication protocol for music playback, but this isn’t the case.
The manufacturer believes that both DLNA and Airplay specifications are publicly standardized and have many limitations in use.
Therefore, MDC BluOS-2 uses specially developed Bluesound technology to access files on the local network, and can only be controlled through Bluesound’s “BluOS” APP.
If you try to use apps designed for DLNA playback like “PlugPlayer” or “Arcam MusicLife,” you won’t find MDC BluOS-2 in the player list.
When testing the MDC BluOS-2 module, I connected it to our company’s local network via ethernet cable, and the previously auditioned CDs were converted to ALAC files stored on our company’s Synology DS212.
Initially, I tried to find the NAS folder in the BluOS APP but discovered that the NAS didn’t appear in the APP’s media library list.
It turns out that BluOS doesn’t automatically detect NAS locations like other DLNA software, but requires manual input of the NAS path in the local network to allow the APP to play files from the NAS.
For example, our company’s NAS is named “DS212” on the company network, with music files stored in the “Music” folder at the root level.
Therefore, I had to input the NAS path “//DS212/music” in the APP, after which it began creating an index for each music file.

Our company’s NAS stores about 4,500 to 5,000 music files, and it took the APP about 10-15 minutes to complete all indexing, after which the APP could play music from the NAS.
Playing the same test music through the MDC BluOS-2 module, I found that its sound was generally similar to the previous setup using the North Star Design Model 192 MK II CD player, with rich details and quick response, though slightly inferior in melodic transitions, soundstage size, and low-frequency extension.
Regarding the BluOS APP operation, the interface is simple and intuitive, and the playback screen shows the file path, format, and sampling rate, which is particularly effective for users who like to compare different versions.
Furthermore, when searching for albums, each album cover icon is large and clear, and just like Google, entering just the first two or three letters of an album name quickly brings up the desired album. Besides playing files from NAS, the BluOS APP integrates streaming services like Spotify, Tidal, and Tunein, allowing users to enjoy rich music resources without leaving the APP, making operation very convenient.
Left image: BluOS main menu, where you need to enter the “More Music” option to access NAS music.
Right image: BluOS album list, showing clear album covers, which is very aesthetically pleasing.
An Affordable Choice for Large Floor-standing Speakers
Finally, I also paired the C368 with the North Star Design Model 192 MK II CD player and Dynaudio Contour 60, playing the same pieces. I found that the main difference between the C368 and C388 lies in their driving power. Compared to the latter’s composure and weight, although the former can also deliver sufficient volume through the speakers, it seems slightly inadequate in terms of low-frequency punch.
Due to equipment needing to be transferred to other audio media for evaluation, and the tight work schedule before the audio show, I couldn’t test the C368 with other speakers to discover its true capabilities. However, I believe it would perform well when driving smaller floor-standing speakers or bookshelf speakers. This speculation awaits verification if the C368 has another chance to be sent to our company for evaluation.
Although the MDC BluOS-2 module is slightly troublesome to set up initially, I found that the C388 has excellent fundamental qualities, with sufficient driving power and crisp handling. Its neutral tonality can still present smooth melodic lines and spatial positioning, demonstrating how NAD has once again used superior circuit design to dispel common prejudices against Class D amplification.
If you’ve long admired the weight and presence of floor-standing speakers but worried about spending too much on an amplifier, the NAD C388 would be a relatively convenient and affordable powerful choice!
Equipment Specifications
NAD C388
- Type: DAC Integrated Amplifier
- Continuous Output Power (Stereo) at 4Ω and 8Ω: >150W (at rated THD, 20-20kHz, both channels driven)
- Dynamic Power Output: 2Ω 400W, 4Ω 350W, 8Ω 250W
- Total Harmonic Distortion (20Hz-20kHz): <0.02% (250mW to 150W, 8Ω and 4Ω)
- Signal-to-Noise Ratio: >95dB
- Damping Factor: >150 (ref. 8Ω, 20Hz and 6.5kHz)
- Frequency Response: ±0.03 (20Hz-20kHz)
- Channel Separation: >75dB (1kHz), >70dB (10kHz)
- Standby Power: <0.5W
- Digital Inputs: Coaxial x2, Optical x2
- Analog Inputs: Line In x2, MM Phono (Input Sensitivity: 0.3mV, ref. 200mV pre-out)
- Dimensions (W x H x D): 435 x 120 x 390mm (17 1/8 x 4 3/4 x 15 3/8″)
- Net Weight: 11.2kg

NAD C368
- Type: DAC Integrated Amplifier
- Continuous Output Power (Stereo) at 4Ω and 8Ω: >80W (at rated THD, 20-20kHz, both channels driven)
- Continuous Output Power at 8Ω (Bridge Mode): >300W (at 20-20kHz, at THD 0.03%)
- Dynamic Power Output: 2Ω 250W, 4Ω 200W, 8Ω 120W
- Bridge Mode Dynamic Power: 4Ω 560W, 8Ω 500W
- Total Harmonic Distortion (20Hz-20kHz): <0.03% (250mW to 80W, 8Ω and 4Ω)
- Signal-to-Noise Ratio: >98dB
- Damping Factor: >300 (ref. 8Ω, 20Hz and 6.5kHz)
- Frequency Response: ±0.03 (20Hz-6.5kHz)
- Channel Separation: >75dB (1kHz), >70dB (10kHz)
- Standby Power: <0.5W
- Digital Inputs: Coaxial x2, Optical x2
- Analog Inputs: Line In x2, MM Phono (Input Sensitivity: 0.3mV, ref. 200mV pre-out)
- Dimensions (W x H x D): 435 x 100 x 390mm (17 1/8 x 4 3/4 x 15 3/8″)
- Net Weight: 7.8kg

MDC DD-BluOS
- Type: Network Streaming Module
- Ports: Ethernet Input x1, Type A USB x2, Type B USB x1
- Accessories: Screws, Wi-Fi Receiver Module, Bluetooth Antenna