Thorens TD 204

Thorens TD 204 Turntable Review


In recent years, the trend in music sources has become increasingly clear, moving in two distinct directions. The first is digital music streaming platforms, making music readily accessible, with smartphones paired with digital streaming players becoming ever more popular. The second is the enduring appeal of analog vinyl, with sales not only holding steady but increasing, making it the champion of physical music media and driving market demand for turntables.

Recognizing the vinyl trend, Thorens has launched the budget-friendly 100 and 200 series for the entry-level market. The TD 204 is positioned as a relatively higher-end product within this range, making it an excellent choice for beginners looking for something more substantial.

Stepping Up from Entry-Level: A More Refined Turntable

Just recently, a friend called asking for advice for someone looking to get into vinyl. After hearing about a few turntables they were considering, I advised that those were very basic entry-level models. They might quickly lose interest and feel the need to upgrade. I suggested increasing their budget slightly to purchase a more “advanced entry-level” option. The TD 204 perfectly fits this description. It boasts a plinth with more mass than typical plastic turntables, a better-quality tonearm, and improved vibration isolation feet. Essentially, every aspect is a step up from basic entry-level models, ensuring the TD 204 offers greater long-term enjoyment.

Regardless of the reason that sparks your interest in vinyl, I would always recommend aiming for a turntable of at least the TD 204’s caliber. Budget plastic turntables under $300 USD, due to material limitations, are often very light. This lack of mass inevitably impacts the sonic weight and authority. Furthermore, they usually offer very limited adjustability, making it difficult to fully experience the magic of vinyl playback. They might end up as mere decorations before long.

However, with turntables like the TD 204, manufacturers can utilize MDF (Medium Density Fiberboard) for the plinth. This material offers significantly higher mass and better resistance to vibration, resulting in an overall improvement in sound performance and a more engaging vinyl experience.

Adjustment-Free Setup for Beginners

The TD 204 presents a very appealing aesthetic. The piano black gloss finish exudes sophistication, and you can also opt for a walnut version for a more classic, furniture-like appearance. When it comes to turntable design, the TD 204 is undeniably classic and timeless, radiating a strong “vinyl vibe.”

For those new to turntables, the biggest fear is often the setup and adjustment process. Rest assured, Thorens has thoughtfully addressed this. Upon unboxing, assembly is straightforward. Simply attach the platter and belt. The tonearm comes pre-set; you only need to mount the headshell. Next, slide the counterweight onto the rear of the tonearm. The only adjustment you might need to make is setting the stylus pressure. While a stylus pressure gauge is recommended, Thorens’ manufacturing precision is high enough that even relying on the counterweight markings will result in a reasonably accurate tracking force. However, it’s always best to have a stylus pressure gauge and double-check before lowering the needle to avoid excessive pressure that could damage your records.

Tool-Free Assembly and Thoughtful Design

The TD 204’s platter is a lightweight zinc alloy design. Don’t underestimate it; even the legendary Linn Sondek LP-12 utilizes a similar traditional platter. The engineering ingenuity lies in the grooves on the underside of the platter, enhancing rigidity and reducing resonance interference. The exact shape and dimensions are the result of years of accumulated know-how by audio manufacturers.

Furthermore, the platter incorporates a rubber damping ring adhered to its outer circumference to further suppress resonances.

The TD 204 features a J-shaped tonearm, the Thorens TP-120, designed in-house and equipped with a detachable headshell. This is a boon for those who enjoy experimenting with different cartridges. However, for beginners, the headshell simplifies things considerably. The factory-installed Audio Technica AT95E MM cartridge comes pre-mounted on the headshell. This means you don’t have to worry about mounting the cartridge to the headshell or connecting the four delicate signal wires. Thorens has taken care of all this at the factory. You simply need to attach the headshell to the TP120 tonearm using the rear screw – completely tool-free, just your hands are needed.

Built-in Phono Stage: Quality MM Performance

Another hurdle for vinyl newcomers is the phono preamplifier. Higher-end turntables often omit a built-in phono stage. However, the TD 204 considers the needs of beginners and includes a built-in MM phono preamp. This allows direct connection to an amplifier’s line-level input or even directly to active speakers, and the TD 204 will happily play music.

The belt-drive TD 204 requires you to place the belt around the motor pulley when installing the platter. The process isn’t difficult, but pay attention. The TD 204 uses a flat belt. When placing it on the motor pulley, ensure it’s seated smoothly and flat. If the belt isn’t properly installed, the speed can be too fast. When I first listened to the TD 204, I was surprised by the fast speed. It turned out to be my mistake. Lifting the rubber mat, I saw the belt was misaligned. Reinstalling it correctly resolved the issue.

Controlling the 33/45 RPM speeds is also simple, using a lever on the plinth for switching. Another lever controls start/stop – very intuitive to use.

Simple Adjustments: Stylus Pressure and Anti-Skate

Regarding adjustments for the TD 204, essentially, beyond stylus pressure, Thorens has preset almost everything, requiring minimal additional adjustments. On the base of the TP120 tonearm, there is an anti-skate adjustment. You can experiment with this. Typically, the anti-skate setting is roughly equal to the stylus pressure value. Before setting it, first ensure the anti-skate is set to zero. A small indicator on the base serves as a reference point for the anti-skate value.

As an advanced entry-level turntable, the only adjustment feature lacking on the TD 204 is VTA (Vertical Tracking Angle), the tonearm height and level. Thorens has preset this. The absence of VTA adjustment means that after changing cartridges, advanced adjustments are limited. However, for TD 204 users, the likelihood of upgrading to a more expensive MC cartridge is probably low, as a quality MC cartridge could cost more than the TD 204 itself. It might be more rewarding to upgrade the entire turntable for a more significant step up in performance.

MM Cartridge and Phono Stage Performance: Sufficient Quality

The Audio Technica AT 95E cartridge included with the Thorens is an excellent entry-level choice. It offers a full and rounded midrange and bass, with smooth highs, resulting in a very pleasant and comfortable sound.

For beginner convenience, the TD 204 features a built-in MM phono stage, eliminating the need for a separate purchase. This built-in phono stage is quite capable, with low noise. However, the output level is slightly lower. Comparing it to the phono stage in my EAR 868P preamp, the TD 204’s built-in phono stage requires turning up the volume by a couple of notches. But for an entry-level MM phono stage, the TD 204’s performance is commendable.

For listening tests of the TD 204, I used the EAR 868P preamp paired with the 509 KM II power amplifier, and Wilson Audio Alexia 2 speakers. This is the editorial department’s usual reference system. Of course, I recognize this is an almost unrealistic pairing for the TD 204. However, I must say, the TD 204 is an exceptionally worthwhile entry-level turntable, especially for rock and jazz enthusiasts. The TD 204 can deliver a rich analog flavor.

Analog Richness: Rock ‘n’ Roll Vibe

Listening to Nirvana’s iconic album “Nevermind,” “Smells Like Teen Spirit” carries a hint of underground psychedelic style. The opening guitar chords lead into heavier overdrive power chords, followed by loosely strummed arpeggiated chords. Listening on the TD 204, it has a distinct analog character that digital music lacks. Perhaps it’s a form of coloration, but vinyl enthusiasts love this characteristic.

I’m not claiming the TD 204’s sound is earth-shattering, but for listening to rock music with less-than-audiophile recordings, it’s authentic and perfectly suited. Nirvana’s recordings are admittedly not the best, with excessive compression and gain, creating the rebellious energy in the music. On top-tier audio systems, they can become fatiguing. However, the analog flavor added by the TD 204 softens the harshness of the recording, adding a touch of psychedelic atmosphere.

Jazz and Vinyl: A Perfect Pairing with Whiskey

Recordings that sound fantastic on the TD 204 and create a great atmosphere include Bill Evans’ “Waltz for Debby.” I flipped to side B and started with “My Romance.” Bill Evans’ piano floats from the left side of the soundstage. The TD 204’s presence hardly sounds like an entry-level turntable. The piano has appropriate weight, unlike entry-level plastic turntables that can sound lightweight and insubstantial. When the double bass and jazz drums join in, the soundstage on the left channel fills out, and the stereo image comes together. The TD 204 effectively creates a swinging jazz atmosphere. MM cartridges are inherently strong in the midrange and bass. Listening to jazz, you can hear the crisp jazz drums, the resonant pluck of the double bass, and the piano with a suitable sheen, the sustain carrying a touch of warmth. It’s a perfect match for a glass of strong single malt whiskey, enjoying vinyl with a touch of mellow intoxication.

Switching to David Roth’s 45 RPM record “Meet You Where You Are,” belt-drive turntables aren’t as instantaneous as direct-drive in speed changes. It takes a few seconds to accelerate to 45 RPM. The TD 204 is no exception. Listening to the title track “Meet You Where You Are,” the gentle arpeggiated chords of the steel-string guitar, the two guitars harmonizing beautifully. David Roth’s vocals are warm and sincere. The TD 204 plays with ease and smoothness. Two guitars behind the vocals play intricate embellishments, left and right, adding a touch of flourish to the simple folk singing. The TD 204, with its appropriate sonic weight, presents sufficient musical depth.

What about classical music? Switching to Du Pré and Barenboim’s recording of Haydn’s Cello Concerto No. 1, the first movement opens with a full orchestral tutti. The TD 204’s substantial sonic foundation allows the orchestra to display a composed grandeur. The overall presentation is stable and smooth. When the cello solo enters, the rich cello tone, again, is full of analog flavor, standing out in the center of the soundstage.

However, with classical music, the limitations become apparent. The high-frequency extension of the MM cartridge is not as refined as that of an MC cartridge. So, while the soundstage is expansive enough, the level of detail could be improved. However, considering the price-to-performance ratio, the TD 204 performs admirably.

A Choice You Won’t Regret

If you’re looking for an exceptional high-end turntable, I wouldn’t start by recommending the TD 204. It’s an advanced entry-level model, lacking complex adjustments, offering only simple stylus pressure and anti-skate settings for you to play with. Most other parameters are preset at the factory. So, if you’re an experienced vinyl setup expert, the TD 204 isn’t for you. It’s not a turntable for seasoned audiophiles. However, if you’re just beginning to explore vinyl and are concerned about setup complexity, the TD 204 is definitely for you. Starting with it won’t break the bank, and it includes a built-in MM phono stage. In terms of sound performance, the TD 204 is a standout performer in its price range. If your turntable budget falls within this category, be sure to include it in your audition and purchase shortlist. For vinyl beginners, the TD 204 is a choice you won’t regret.

Specifications

* Type: Belt-drive turntable
* Motor: DC motor
* Speeds: 33 1/3 RPM, 45 RPM
* Built-in Phono Stage: MM
* Platter: Aluminum die-cast platter
* Platter Diameter: 12 inches
* Tonearm Type: TP120 Static Balance J-shape arm
* Material: Aluminum tube
* Effective Length: 9″, 232.8 mm
* Stylus Pressure Range: 3.5 to 6 g
* Cartridge Weight Range: 3.5 to 6.0g
* Overhang: 17.8 mm
* Anti-skate Adjustment: Yes
* Cartridge Type: MM type (Audio-Technica AT 95 E)
* Stylus Construction: Metal and diamond separation
* Channel Separation: >20dB
* Channel Balance: 2.5dB
* VTA: 20 degrees
* Impedance: 47k ohms
* Output Voltage: 3.5mV (1kHz, 3.54cm/sec.)
* Stylus Pressure: 2.0g +/-0.5g
* Weight: 5.7g +/-0.5g
* Headshell Weight: 10 g
* Analog Output Terminals: Gold-plated RCA
* Power Supply: AC 100 to 240V, 50/60Hz
* Power Consumption: 1.5W (standby less than 0.5W)
* Dimensions: 420 x 355 x 121 mm
* Weight: 4.8 kg