CanEVER Audio ZeroUno DAC MK2 Vacuum Tube Decoder Review
CanEVER Audio ZeroUno DAC MK2 Vacuum Tube Decoder
At last year’s audio exhibition, a striking product appeared in the Madison Sound booth. Two vacuum tubes stood tall on the machine, with three upright cylinders at the back, presumably transformers.
The front panel featured two knobs, one for power and the other for volume, giving the appearance of a vacuum tube amplifier.
However, we were all mistaken.
Crafted by a Digital Electronics Expert
This is a DAC from Italy’s CanEver Audio, or as the manufacturer defines it, a digital preamplifier, model ZeroUno DAC MK2.
CanEVER is the surname of the founder and current company owner, Mario Canever, who has a background in digital electronics engineering. After obtaining his master’s degree, he pursued another in radar system maintenance engineering at Rome’s S.T.EI.E. military school.
Radar system engineering also focuses on digital electronics, underscoring Mario’s expertise in the field.
After graduation, he worked at Electrolux and Ericsson, initially in circuit design and later as a systems engineer, specializing in the integration of digital and analog circuits.
He was then sent to Hong Kong by the company and became a consultant for independent system engineering for two multinational companies.
These were jobs, a means to earn a living, but Mario’s true passion lay in audio.
Reflecting on the past, at 16, Mario wanted to buy a Vespa scooter, but his mother refused. Instead, he immersed himself in assembling audio systems, spending considerable time to finally build a system centered around Altec 19.
Not getting the scooter, he turned to audio, and that’s how Mario fell in love with it.
He later delved into the designs of La Maison de L’Audiophile and MJ Audio.
With his education in electronics and work as a systems engineer, designing audio equipment was not difficult for him.

The key question was: What sound did Mario want? The CanEVER ZeroUno MK2’s chassis is solid, and the surface coating is also noteworthy. The manufacturer states that it is a special coating that provides damping to the chassis, suppressing vibrations.
Aiming to Recreate the Emotion of a Concert Hall
“I want to recreate the emotional impact of music heard in a concert hall.”
While audio manufacturers emphasize various test data and audio jargon, Mario believes that CanEVER Audio’s philosophy on music playback is simply to return to the essence of music.
The difference between an outstanding musician and a mediocre performer lies in their ability to express timing, rhythm, tone, and dynamic nuances in music.
Without understanding these, one cannot understand what makes good audio.
His goal is to evoke emotional resonance in listeners through CanEVER Audio’s equipment, akin to the profound impact of a beautiful performance in a concert hall.
It sounds simple, but how is it achieved? The CanEVER Audio ZeroUno DAC MK2 looks like a vacuum tube amplifier.
The left knob is the power switch, and the right knob controls the volume.
The screen has four lines, with no flashy design, but the information is clear and straightforward.
The button to the right of the screen is for input selection, and the one on the left enters the menu.
The machine is designed with a three-point grounding system.
Integrated Circuit Board for the Shortest Path
Mario did something different from others.
Other DACs often divide the internal chassis into several sections to avoid interference, separating the power, digital, and analog circuits.

While this seems like isolation, Mario believes it creates more problems.
The suspended connecting wires can pick up electromagnetic waves, and DACs often handle high-frequency digital signals, which can degrade sound quality due to high-frequency electromagnetic interference.
Additionally, separating circuit boards requires addressing grounding issues, which are challenges for engineers.
To avoid these complications, Mario believes integrating everything on a single board is better.
He chose a four-layer PCB with thickened copper foil for transmission.
Transmitting signals on the same board achieves the shortest path, with digital, analog, and grounding layers separated to avoid electromagnetic interference.
The three upright cylinders at the back are transformers.
The rear terminals appear very sturdy, with analog outputs on the right, both single-ended and balanced, and four digital inputs on the left, including coaxial, USB, AES/EBU, and optical.
Mario, the head of CanEVER, believes integrating everything on a single board is better.
He chose a four-layer PCB with thickened copper foil for transmission.
Transmitting signals on the same board achieves the shortest path, with digital, analog, and grounding layers separated to avoid electromagnetic interference.
Sixty Percent of Development Effort on Power Supply
Mario believes the power supply is crucial for audio equipment, so the ZeroUno DAC MK2 (hereafter referred to as ZeroUno for convenience) has a particularly sophisticated power supply.
First, he separated the power supplies for each circuit, using four toroidal transformers in total, one each for the digital and analog circuits, and two for the left and right channels of the vacuum tube output stage.
Second, all transformers are encased in metal canisters (the three cylinders visible on the chassis are the power supplies), which shield electromagnetic waves, and are filled with damping material to suppress vibrations and hum.

Third, the power supplies for the digital and analog circuits are divided into two parts. The first part stabilizes and rectifies the power to produce clean DC, while also serving as an isolator for the rear power supply, blocking external noise.
The second part consists of 13 ultra-low-noise independent power supplies, using aluminum organic solid capacitors instead of common electrolytic capacitors.
This effort to minimize noise prevents harsh, sharp sounds.
Mario even said that during the development of ZeroUno, 60% of the time was spent on creating a good power supply, highlighting its importance as a labor of love.
The power supply of the ZeroUno DAC MK2 is particularly sophisticated.
The power supplies for each circuit are separated, using four toroidal transformers in total, one each for the digital and analog circuits, and two for the left and right channels of the vacuum tube output stage.
Custom Firmware to Maximize Chip Performance
Let’s talk about the decoding core.
ZeroUno uses the ESS SABRE32 ES9018s, an 8-channel chip.
This decoding chip is quite common and has excellent specifications.
Mario stated in the technical white paper that to fully utilize the advantages of this chip, precise and rigorous design is essential.
To achieve this, Mario wrote custom firmware, utilizing the original 8-channel chip, dividing it into two groups, with four groups per channel, to create a dual differential circuit.
Through Mario’s research, the chip’s built-in 32-bit volume control is well-designed, providing excellent channel separation and balance even at low volumes.
The chip’s built-in jitter elimination module effectively reduces DAC jitter.
Their custom firmware effectively maximizes the ES9018s chip’s performance, and this firmware is stored in independent memory, allowing for future updates to further enhance ZeroUno’s performance.

To reduce digital jitter, ZeroUno’s built-in master clock is a voltage-controlled quartz oscillator with a frequency of 100MHz, featuring ultra-low phase noise and low jitter.
Additionally, there are two oscillators responsible for the 44.1KHz and 48KHz multiples, aiming to reduce jitter.
On the digital input side, the USB interface is worth mentioning.
ZeroUno’s USB interface module is located above the DAC chip, shortening the transmission path.
The core of this module is an XMOS XU216-512 receiver chip, which has 16 built-in processors for synchronous multitasking.
CanEVER’s custom firmware also maximizes the performance of this receiver chip, achieving bit-perfect transmission.
Furthermore, the manufacturer emphasizes that they do not allow the computer to power the USB path. Instead, ZeroUno has a built-in ultra-low-noise power supply for the USB receiver module, with a “1 Farad” supercapacitor as a buffer, meaning this USB module operates almost like it’s battery-powered.
You see, with the shortest path, specialized firmware, and unique power supply, CanEVER truly pays attention to every critical detail, doing what others haven’t.
ZeroUno uses the ESS SABRE32 ES9018s, an 8-channel chip.
This decoding chip is quite common and has excellent specifications.
Mario stated in the technical white paper that to fully utilize the advantages of this chip, precise and rigorous design is essential.
To achieve this, Mario wrote custom firmware, utilizing the original 8-channel chip, dividing it into two groups, with four groups per channel, to create a dual differential circuit.
To reduce digital jitter, ZeroUno’s built-in master clock is a voltage-controlled quartz oscillator with a frequency of 100MHz, featuring ultra-low phase noise and low jitter.
Additionally, there are two oscillators responsible for the 44.1KHz and 48KHz multiples, aiming to reduce jitter.
Abandoning OP Amplifiers, Choosing Swiss Lundahl Transformers for I/V Conversion

Having covered the digital side, let’s move to the analog part.
After the digital signal is converted by the ES9018s chip, the analog signal first undergoes I/V conversion.
Most DACs use OP amplifiers for I/V conversion, often highlighting the OP amplifier chip they use.
ZeroUno is different; Mario opted for a more complex and costly method—using interstage transformers for I/V conversion.
Moreover, this interstage transformer is specified by CanEVER and made by the Swedish company Lundahl, which has 60 years of transformer manufacturing experience. It uses a non-crystalline metal sheet for the core, ensuring high sensitivity and no detail loss even at very low volumes. With special winding, this transformer can transmit extremely low frequencies without issue, offering a wide and linear frequency response.
Most DACs use OP amplifiers for I/V conversion, but ZeroUno is different, using interstage transformers for I/V conversion.
Specified by CanEVER and made by the Swedish company Lundahl, it uses a non-crystalline metal sheet for the core, ensuring high sensitivity and no detail loss even at very low volumes. With special winding, this transformer can transmit extremely low frequencies without issue, offering a wide and linear frequency response.
CV181 Vacuum Tube Output Stage
Although I previously mentioned that the ES9018S is the core of ZeroUno, that purely refers to the digital-to-analog conversion core.
According to Mario, the true core of ZeroUno is its vacuum tube output stage.
ZeroUno’s output stage adopts a no-global-feedback, full Class A cascade buffer, using two CV181 dual triodes from China’s Psvane for buffering. This tube is a high-end member of the 6SN7 family, praised as the F1 version of the 6SN7GT, with the same output curve as the 6SN7GT but requiring higher current. The CV181’s structure is also more robust, and the black screen reduces microphonic effects.
Mario also emphasized that the resistors used in the vacuum tube output stage were selected through human ear testing to achieve the best sound performance, opting for carbon composition resistors.
These resistors may not perform as well as some metal film resistors in test data, but they sound better.
The vacuum tube used for buffering is the CV181 dual triode from China’s Psvane, a high-end member of the 6SN7 family, praised as the F1 version of the 6SN7GT.
This part is the analog output circuit.

The diagram shows they also used Mundorf capacitors.
No Detail Overlooked in Chassis, Knobs, and Feet
ZeroUno doesn’t have its own remote control but can be controlled with an Apple TV remote.
Although ZeroUno uses digital volume control, the volume knob is specially selected from Swiss Elma. Mario chose this knob because it has an additional bearing at the center shaft, enhancing stability and durability.
The knob turns smoothly, with a slight rebound feel.
The chassis material is aerospace aluminum combined with stainless steel plates, offering the advantages of hardness, lightness, and vibration suppression.
The surface coating is a polypropylene synthetic paint that helps increase the chassis’s damping, suppressing vibrations.
The bottom uses three round stainless steel feet, one in the front and two in the back, with felt layers underneath. They have gaps, and shaking them produces sound, indicating these are not ordinary feet but specially designed products with shock-absorbing effects.
Although ZeroUno uses digital volume control, it is paired with a Swiss Elma knob. The reason for choosing this knob is the additional bearing at the center shaft, enhancing stability and durability.
Custom Firmware to Maximize Chip Performance
Let’s talk about the decoding core.
ZeroUno uses the ESS SABRE32 ES9018s, an 8-channel chip.
This decoding chip is quite common and has excellent specifications.
Mario stated in the technical white paper that to fully utilize the advantages of this chip, precise and rigorous design is essential.
To achieve this, Mario wrote custom firmware, utilizing the original 8-channel chip, dividing it into two groups, with four groups per channel, to create a dual differential circuit.

Through Mario’s research, the chip’s built-in 32-bit volume control is well-designed, providing excellent channel separation and balance even at low volumes.
The chip’s built-in jitter elimination module effectively reduces DAC jitter.
Their custom firmware effectively maximizes the ES9018s chip’s performance, and this firmware is stored in independent memory, allowing for future updates to further enhance ZeroUno’s performance.
To reduce digital jitter, ZeroUno’s built-in master clock is a voltage-controlled quartz oscillator with a frequency of 100MHz, featuring ultra-low phase noise and low jitter.
Additionally, there are two oscillators responsible for the 44.1KHz and 48KHz multiples, aiming to reduce jitter.
On the digital input side, the USB interface is worth mentioning.
ZeroUno’s USB interface module is located above the DAC chip, shortening the transmission path.
The core of this module is an XMOS XU216-512 receiver chip, which has 16 built-in processors for synchronous multitasking.
CanEVER’s custom firmware also maximizes the performance of this receiver chip, achieving bit-perfect transmission.
Furthermore, the manufacturer emphasizes that they do not allow the computer to power the USB path. Instead, ZeroUno has a built-in ultra-low-noise power supply for the USB receiver module, with a “1 Farad” supercapacitor as a buffer, meaning this USB module operates almost like it’s battery-powered.
You see, with the shortest path, specialized firmware, and unique power supply, CanEVER truly pays attention to every critical detail, doing what others haven’t.
ZeroUno uses the ESS SABRE32 ES9018s, an 8-channel chip.
This decoding chip is quite common and has excellent specifications.
Mario stated in the technical white paper that to fully utilize the advantages of this chip, precise and rigorous design is essential.
To achieve this, Mario wrote custom firmware, utilizing the original 8-channel chip, dividing it into two groups, with four groups per channel, to create a dual differential circuit.

To reduce digital jitter, ZeroUno’s built-in master clock is a voltage-controlled quartz oscillator with a frequency of 100MHz, featuring ultra-low phase noise and low jitter.
Additionally, there are two oscillators responsible for the 44.1KHz and 48KHz multiples, aiming to reduce jitter.
Abandoning OP Amplifiers, Choosing Swiss Lundahl Transformers for I/V Conversion
Having covered the digital side, let’s move to the analog part.
After the digital signal is converted by the ES9018s chip, the analog signal first undergoes I/V conversion.
Most DACs use OP amplifiers for I/V conversion, often highlighting the OP amplifier chip they use.
ZeroUno is different; Mario opted for a more complex and costly method—using interstage transformers for I/V conversion.
Moreover, this interstage transformer is specified by CanEVER and made by the Swedish company Lundahl, which has 60 years of transformer manufacturing experience. It uses a non-crystalline metal sheet for the core, ensuring high sensitivity and no detail loss even at very low volumes. With special winding, this transformer can transmit extremely low frequencies without issue, offering a wide and linear frequency response.
Most DACs use OP amplifiers for I/V conversion, but ZeroUno is different, using interstage transformers for I/V conversion.
Specified by CanEVER and made by the Swedish company Lundahl, it uses a non-crystalline metal sheet for the core, ensuring high sensitivity and no detail loss even at very low volumes. With special winding, this transformer can transmit extremely low frequencies without issue, offering a wide and linear frequency response.
CV181 Vacuum Tube Output Stage
Although I previously mentioned that the ES9018S is the core of ZeroUno, that purely refers to the digital-to-analog conversion core.
According to Mario, the true core of ZeroUno is its vacuum tube output stage.
ZeroUno’s output stage adopts a no-global-feedback, full Class A cascade buffer, using two CV181 dual triodes from China’s Psvane for buffering. This tube is a high-end member of the 6SN7 family, praised as the F1 version of the 6SN7GT, with the same output curve as the 6SN7GT but requiring higher current. The CV181’s structure is also more robust, and the black screen reduces microphonic effects.
Mario also emphasized that the resistors used in the vacuum tube output stage were selected through human ear testing to achieve the best sound performance, opting for carbon composition resistors.

These resistors may not perform as well as some metal film resistors in test data, but they sound better.
The vacuum tube used for buffering is the CV181 dual triode from China’s Psvane, a high-end member of the 6SN7 family, praised as the F1 version of the 6SN7GT.
This part is the analog output circuit.
The diagram shows they also used Mundorf capacitors.
No Detail Overlooked in Chassis, Knobs, and Feet
ZeroUno doesn’t have its own remote control but can be controlled with an Apple TV remote.
Although ZeroUno uses digital volume control, the volume knob is specially selected from Swiss Elma. Mario chose this knob because it has an additional bearing at the center shaft, enhancing stability and durability.
The knob turns smoothly, with a slight rebound feel.
The chassis material is aerospace aluminum combined with stainless steel plates, offering the advantages of hardness, lightness, and vibration suppression.
The surface coating is a polypropylene synthetic paint that helps increase the chassis’s damping, suppressing vibrations.
The bottom uses three round stainless steel feet, one in the front and two in the back, with felt layers underneath. They have gaps, and shaking them produces sound, indicating these are not ordinary feet but specially designed products with shock-absorbing effects.
Although ZeroUno uses digital volume control, it is paired with a Swiss Elma knob. The reason for choosing this knob is the additional bearing at the center shaft, enhancing stability and durability.
No Sharp, Oppressive Stimulation, Allowing Easy Immersion in Music
For example, the live recording of Perlman and Argerich, featuring Beethoven’s “Kreutzer” and Franck’s Violin Sonata.
“Kreutzer” is a sonata full of fantasy, even with concerto-like characteristics, offering ample space for violin virtuosity.

This live recording is very realistic, with complete dynamics, so when the violin reaches an intense point, some systems might make you feel pressured, forcing you to lower the volume.
On ZeroUno, I didn’t have this feeling. I tried turning up the volume slightly higher than usual for this piece. The high-position violin sound is naturally tense, a physical phenomenon, but the harsh stimulation that might scratch the ears with other DACs is smoothed out. The violin sound is more restrained, gentle, not as white-hot, yet feels fuller and more substantial.
Don’t believe me? Listen to the first movement, and you’ll understand why I praise its smoothness. Then listen to the second movement, and you’ll appreciate why I admire its solidity.
However, don’t misunderstand ZeroUno as lacking in detail just because of what I said.
I’m merely pointing out that its method of presenting details isn’t so deliberate, as if afraid you might miss something.
When I think of Mario’s words, hoping to lead everyone back to the emotional impact of concert halls and live performances through CanEVER’s equipment, I understand his sound aesthetics.
In his view, modern audio’s relentless pursuit of minute detail actually distorts the essence of music and erodes the original intent of listening to music.
In a concert hall, you won’t hear that many details, but you’ll hear harmonious, integrated music.
I feel that the taste I hear on ZeroUno is this—a quality that makes you focus on the music, forgetting about audio characteristics and elements.
Smooth Sound Doesn’t Compromise Liveliness and Power
To prove my point that it indeed has enough detail to present musical beauty, I use the recording of double bassist Edgar Meyer and mandolinist Chris Thile as an example.
This is a track on TIDAL, playing the MQA version, decoded by Aries Mini, with the file in its native 24bit/88.2KHz format.
Although MQA still sparks debate in the audio world, with supporters praising its better sound quality and smaller file size, while opponents argue that MQA’s compression/decoding process might cause phase distortion.
Regardless, for TIDAL users, being able to stream and hear high-resolution music with a more cohesive and clean texture is an undeniable small joy.
The mandolin is similar to a guitar but with a narrower range and smaller volume. However, it produces a sound with a tremolo texture through plucking, with a slightly short tone, adding a sense of nostalgia and folk, and a touch of playfulness and ingenuity.

This plucking needs to be lively; how can it be without detail? Ample information brings out a sense of distance and layers, with the swift movements of plucking and strumming conveying power and speed.
Thile’s performance isn’t classical but carries a modern guitar style, and ZeroUno brings this lively scene effortlessly.
The other protagonist is the double bass, with the roughness of the vibrating strings during bowing not missing.
The rich and deep resonance of the soundbox, with each beat like waves hitting the shore, is powerful.
As I listen, I think: If I had a floor-standing speaker to hear this piece, that would be truly satisfying!
Pairing with Tube Amplifiers Enhances Beauty
Changing speakers isn’t easy; I need to save money to fulfill that dream.
But changing amplifiers is feasible. I connected ZeroUno to Audiomat Adagio MK2, and with the tube amplifier, the flavor changed again.
Firstly, the tone became more beautiful, with the mandolin more vibrant and the floating quality of the sound brought out.
The double bass’s beats weren’t as full and large, but still solid and powerful, with the sound source appearing more three-dimensional, and the overall liveliness of the music improved.
Ah, this is why, even in an era where smartphones surpass computers, we still need tube amplifiers.
That sound is irreplaceable! No wonder Mario wants to make tube amplifiers, even making DACs “tube.”
Listening to Beethoven’s Fourth Piano Concerto, performed by Brendel and conducted by Rattle with the Vienna Philharmonic, the piano’s granularity is excellent. This granularity is full, rounded, substantial, yet bright, glossy, warm, and moist.
ZeroUno can make the piano sound like pearls and jade, and at that moment, I felt that perhaps the idiom “pearls and jade” was specifically meant to describe ZeroUno. The same piece, on the same system, NuPrime DAC-10H doesn’t have that fullness and granularity, and Esoteric K-03XS lacks that thickness and smooth texture.
I find pairing ZeroUno with Adagio truly delightful, with this “tube” journey not dragging or dull, but allowing the tone to shine warmly and luxuriously, while maintaining the sound image’s solidity.

I really don’t want to write too many audio terms; those terms seem too mundane at this moment.
When Brendel plays a string of crystal-clear and granular arpeggios, ascending and descending, then falling into a low reverie, the emotion isn’t from the sound, but the music.
Low Strings Especially Showcase Its Majesty
ZeroUno’s soundstage isn’t extremely expansive. If you’re looking for something that opens up the sound immediately, American equipment might have a higher chance.
However, ZeroUno isn’t petty either. In orchestral performances, the force that should surge and the sound waves that should push out aren’t compromised.
I believe the limitation isn’t in it, but in the downstream equipment. Is the amplifier powerful enough? Are the speakers too small? For example, in the third movement of the Fourth Piano Concerto, the orchestra’s strings play the theme lightly yet lively, the piano softly reiterates, and the orchestra powerfully plays the theme again.
This piece is full of such sudden rises, and I thoroughly enjoy these musical ups and downs. When the orchestra plays in unison, the music maintains a good thickness, and when the low strings emerge, you can feel this advantage; it also maintains a delicate texture, and when the music transitions to piano monologues or woodwind solos, you know its subtle side.
Excelling in Expressing the Texture of Natural Instruments
Although I’ve mostly cited classical music examples, that’s mainly because I listen to classical music the most.
In terms of sound performance, I believe classical music particularly suits its strengths, but that doesn’t mean it can’t handle other types of music.
The previous recording of Meyer and Thile’s double bass and mandolin performance isn’t considered classical music.
A good piece of equipment shouldn’t be limited to a specific type of music; rather, it may have a characteristic or direction that makes it particularly advantageous for certain types of music.
ZeroUno is like this; I believe it excels in expressing the authenticity of natural instruments.
It can also sing jazz.
Take John Harmon Trio’s live album as an example.
This Klavier recording is very lively, and the opening performance of Cole Porter’s classic “Night and Day” is particularly brilliant.
The drum sound at the beginning not only reveals the drum set’s position at the back, creating a front-to-back stage depth, but the lively atmosphere created by the drum set’s subtle sounds keeps you from being distracted from the start.
The fourth track, the classic “The Days of Wine and Roses,” features a constant cymbal agitation, and the piano playing with a bit of stickiness and elasticity, making it particularly enjoyable.
Listening to Lee Ritenour leading a group of musicians in “6 String Theory,” the first track features Ritenour and John Scofield in a duet, with the electric guitar’s sound not harsh even at intense moments, the drum sound full and rich, and the electric bass with a strong sense of granularity.
The third track features Pat Martino, who often performs by playing melodies, with the guitar sound clear and charming.
The playful organ ensemble creates a rich sense of tone.
However, when expressing music with impact and explosiveness, ZeroUno’s gentle tendency makes the music slightly less stimulating and impactful.
For those who enjoy this style, it might feel somewhat lacking.
However, if you want to enhance the stimulation, you can adjust through system pairing, such as using a fast, powerful solid-state amplifier or cables emphasizing resolution to compensate.
Directly Connecting to Power Amplifiers Sounds Good—Even with Digital Volume Control, It’s Trustworthy
The previous listening tests used ZeroUno purely as a DAC, with the volume turned up to the maximum, playing without any attenuation.
Since the manufacturer considers ZeroUno a digital preamplifier, meaning a preamp without analog inputs, should I try using it this way? I connected ZeroUno directly to the ST-10 power amp, adjusting the volume to around -27dB, and found it sounded better than using the DAC-10H as a preamp.
The DAC-10H isn’t a true preamp, more like a DAC with analog volume control, but its volume control doesn’t use traditional thin-film resistors, instead employing a stepped resistor structure, a sophisticated approach.
ZeroUno’s volume control is digital, using the ESS9018S chip’s volume control for attenuation.
Generally, audiophiles dislike digital volume control, believing it reduces detail and dynamics.

I thought the same, so I initially didn’t use it as a preamp.
However, after trying it, I found it sounded more direct as a preamp, feeling like adding the DAC-10H added NuPrime’s flavor.
At this point, the sound felt purer, with a cleaner texture, better cohesion of the sound source, and in jazz, the bass plucking felt more elastic and granular.
In terms of detail, I didn’t feel anything was missing. Listening to Tchaikovsky’s “Slavonic March,” I didn’t notice any dynamic issues.
If you want to simplify the system or have a low-level preamp, pairing with ZeroUno, try letting it connect directly to the power amp or active speakers. The sound performance won’t disappoint, and it might be the closest to Mario’s vision of CanEVER’s sound.
The only drawback when using it as a preamp is the lack of a dedicated remote control, requiring the use of an old Apple TV remote.
However, if you don’t mind walking around and manually operating it, the absence of a remote is actually not a big deal.
If You Can’t Go to the Concert Hall, Let It Take You There!
The design of CanEVER Audio ZeroUno DAC MK2, from inside to outside, from input to output, is meticulously thought out by Mario, with unique features and reasoning.
This is the hardware.
The true essence of an audio system isn’t in the hardware but in sound performance; the persuasiveness of sound is the key.
I don’t believe everyone will like ZeroUno’s sound; it carries Mario’s personal sound aesthetics, a beauty referencing concert halls and opera houses, with the sound of real instruments as the standard.
If you don’t seek this, ZeroUno is Zero for you.
Conversely, if you pursue this—ignoring audio characteristics, seeking musical emotion—then ZeroUno is Uno for you.
If you can’t go to the concert hall, let it take you there!
Specifications
- Type: Digital-to-Analog Converter
- Digital Inputs: RCA Coaxial x1; Optical x1; AES/EBU x1; USB Type B x1
- Analog Outputs: RCA x1; XLR x1
- Decoder Chip: ESS9018S
- Supported Maximum Audio Format: PCM 32bit/384KHz; DSD 128