KECES S3 DAC Headphone Amplifier Preamp Review
Many audio and headphone enthusiasts are familiar with KECES, which has entered a new era! In the past, KECES was synonymous with Zhang Guoping, and vice versa.
Now, Mr. Zhang Guoping has transitioned from the founder to a consultant role, with all design work and marketing responsibilities handed over to a new team. This, along with a more comprehensive product line, gives KECES a fresh new look.
Fully Functional, High-Performance DAC Headphone Amplifier
KECES started with DIY kits, with their initial product being a DAC. They later introduced headphone amplifiers with USB DACs and various linear power supplies.
Notably, KECES’s linear power supplies feature dual outputs and offer various voltage combinations, making them compatible with small DACs or NAS devices. This has earned them a solid and reliable brand image among computer audio and desktop listening enthusiasts.
The new generation of KECES continues the product categories and positioning of the past, not only expanding the range of power supply products but also adding amplifiers, providing consumers with a complete set of options.

We will be reviewing a series of KECES products, including DAC preamps, power amplifiers, balanced power supplies, and linear power supplies, to give everyone a glimpse of the full scope of KECES.
Everything starts with the S3.
The S3 is a multifunctional device equipped with various DAC interfaces, single-ended and balanced analog inputs, a headphone amplifier, and single-ended and balanced preamp outputs.
My first impression of it is solidity, from two aspects: the solid chassis structure and the solid internal components.
KECES’s new generation models strive to use shared chassis to reduce material costs. However, this chassis is not to be underestimated. The entire unit is made of 3mm thick aluminum plates, with the front panel and left and right side panels forming a single U-shaped aluminum plate. The top, bottom, and rear panels are all securely attached to this main board, resulting in an extremely simple and sturdy overall structure.
The LED screen in the center of the panel, though not large, provides clear and rich information, including the input name, sampling rate for digital inputs, volume, and high/low gain.

There is a toggle switch on each side of the screen. The right switch is for high/low gain selection for the headphone amplifier, allowing the S3 to accommodate the voltage needs of headphones with different impedances.
The left switch toggles between preamp and headphone amplifier output. When using the preamp output, the gain switch has no effect.
The far left of the panel offers two headphone outputs: one 6.3mm and the other a 4-pin XLR balanced output, providing rich flexibility in pairing.
128-Step Volume Control
A noteworthy feature of the S3 is its volume adjustment.
The S3 uses electronically controlled relays to switch resistor arrays. There are 24 relays on the circuit board, each with two precision resistors beside it, corresponding to the appropriate resistance values for two channels. This provides a very fine and precise 128-step volume control, which is purely analog and stepwise, not only highly linear but also with low channel imbalance, a rare design among products in its class.
Moreover, the tactile feel of the volume knob is excellent. Turning it one notch changes the volume by one step, and you can hear the crisp clicking of the relays as you turn it. Paired with the anodized aluminum knob’s delicate touch, it feels quite satisfying to turn.

The S3 has three digital input interfaces: USB, Coaxial RCA, and Optical, and also provides RCA and XLR analog inputs, making it easy to connect various types of sources.
The S3’s USB receiver uses an XMOS chip, and the digital-to-analog conversion is handled by an ESS ES9026PRO chip. When using USB input, it supports up to 32bit/384kHz PCM and DSD256 (ASIO Native) sampling rates. If using Coaxial RCA or Optical input, it supports up to 24bit/192kHz PCM and DSD64 (DoP), fully compatible with existing high-resolution music formats.
For preamp output, both RCA and XLR are available, leaving nothing lacking.
The S3’s XLR output uses one N5532 dual OP per channel for balanced amplification, while the RCA output shares one N5532 for both channels.
All internal components are SMD surface-mount devices, so DIY enthusiasts might not be able to replace the internal OPs themselves. However, I think this is a good thing. Just listen to the best settings KECES has designed without being tempted to think about whether another OP sounds better. That often leads to unnecessary trouble. It’s better to focus on getting the pairing right, which is the proper way to adjust an audio system.
In terms of power, the S3 is equipped with a high-quality large toroidal transformer, with two secondary windings providing power for digital and analog sections separately, and both sections have independent grounding to ensure no mutual interference.

Provides Great Peace of Mind
Not only is the hardware well-made and complete, but the S3’s software also comes with a full suite of support.
My computer operating system is Windows 10, and to connect the S3 via USB, a driver installation is required.
The driver can be directly downloaded from the KECES official website. The installation process is very smooth, completed in one go, giving a sense of reliability even before listening.
Additionally, the S3’s USB driver includes ASIO output. When I select the audio device in foobar2000, I can directly see the option “DSD: ASIO: KECES Audio USB Audio Device.” Just select it.
During the listening process, the S3’s playback remained very stable, never experiencing any interruptions, pauses, or distortion, even when switching between tracks of different sampling rates or formats. There were never any unusual sounds, in short, it was smooth, stable, and responsive, providing great peace of mind.
When testing the S3, I also used KECES’s BP-600 balanced power processor.

Initially, I did not use the BP-600, just connecting the S3, computer, monitor, and desk lamp to the same power strip. At this time, the S3’s sound had a faintly rough texture, the background was not very clear, the sound was somewhat floating, and the sound image outline was not very clear, making it tiring to listen to for long periods.
This listening experience, I had felt before with other headphone amplifiers, and I suspect the cause is the power supply. After all, this is an office, with many computers running on the same power circuit at the same time, along with other office appliances and network equipment, the power supply is certainly not clean.
Later, I brought out the BP-600 and plugged the S3 into it. Unexpectedly, the aforementioned issues were immediately and significantly improved, the sound became clearer and more vibrant. Once you’ve heard it, you can’t go back, so for formal listening, the S3 was powered by the BP-600, while the computer remained connected to the original power strip.
Clear Soundstage Structure and Rich Layers
After listening for a while, I found that the S3 made it difficult for me to write a review.
It’s not that it’s bad, but rather that it’s good in all aspects, which makes it lack a distinctive personality, so it’s hard for me to describe it from a specific angle.

Is equipment without personality good? I think it’s great, especially since the S3 is not only tonally neutral but also performs excellently, with rich tonal colors that can fully showcase the individual strengths of different headphones, allowing me to hear more.
Take the Philips Fidelio X1 headphones as an example. The Fidelio X1 has relatively more bass compared to other frequency bands, giving a sense of abundant bass, fluffy sound, and darker treble. However, as long as the front-end amplifier’s frequency band proportion is appropriate, with good bass control, imaging, and rich layers, you can appreciate the Fidelio X1’s broad and powerful, relaxed and atmospheric, clear structure, rich layers, and easy extension at both ends.
The S3 has this kind of strength.
For example, Chris Botti’s “Night Sessions” album, which is in a pop-jazz style, is not only pleasant to listen to but also has excellent recording performance.
The S3 clearly presents the recording direction of pop-jazz, which leans towards a heavier bass presence. The bass I hear is abundant but not excessive, being thick and full, with clear lines, solid strength, and elasticity, maintaining dynamism and vitality amidst relaxation and density.
Through the Fidelio X1, in addition to hearing the S3’s excellent bass performance, I also discovered another advantage of the S3, which is the excellent sense of layering and separation of different parts.
For instance, Christopher Tin’s classical crossover album “Calling All Dawns,” which combines elements like the Royal Philharmonic Orchestra, male and female choirs, soloists, and electronic bass, creates a grand and majestic atmosphere. Driven by the S3, each part is laid out with a rigorous structure and clear form between my ears, with no confusion between the various sounds. The frequency distribution is balanced and open, with natural extension at both ends, deep and stable bass, and a majestic momentum, making it very enjoyable to listen to. Just from this album, you can tell that the S3 has excellent quality and profound strength.

Headphones’ Strengths and Weaknesses Are Unveiled
The S3’s clear organization, balanced openness, excellent bass imaging, and well-controlled strength and density are the aspects that impressed me the most. Paired with the X1 headphones, listening to symphonies, rock, or pop music is very satisfying. However, when I switched to the newly arrived Sennheiser HD 660 S headphones for review, I had a new experience with the S3: it also has a delicate and refined side.
The HD 660 S has a noticeably different direction from the Fidelio X1, with the frequency band proportion shifted upwards, reducing the bass presence and weight, while the treble is brighter, and the midrange has better cohesion. The HD 660 S can also present richer tonal colors, textures, and details, which the S3 also possesses, showcasing different styles through different headphones.
For example, in the “Bach Trios” album, a collaboration between Yo-Yo Ma, bassist Edgar Meyer, and mandolinist Chris Thile, I can still feel the S3’s slightly thick and heavy direction. However, the subtle sandy texture of bow and string friction, the most charming rich resonance and sweet texture of the cello, and the crisp and bright sound of the mandolin strings are not missed by the S3, providing a relaxed and pleasant listening experience.
Similarly, in the Cadence Ensemble’s “Expressia: Tangos & Fantasies” album, you can feel that the S3 presents tango music in a more rational and cautious manner. Although the string tone is not of an oily and smooth texture, it still has a good sense of flow and smooth undulation, making the performance satisfying.
After spending some time with the S3, I found it quite suitable for audio reviewers or headphone enthusiasts. Not only because of its strong compatibility, supporting music of various sampling rates and formats, and its extremely stable performance, which is trustworthy, but most importantly, the S3’s neutral personality allows it to showcase the characteristics of different headphones and bring out their limits, making the strengths and weaknesses of various headphones clearly revealed.
Equipment Specifications
- KECES S3 Type: DAC Headphone Amplifier Preamp
- Inputs: USB, Coaxial, Optical
- Maximum Supported Sampling Rate: 32bit/384kHz PCM, DSD256 Native (USB input)
- Analog Inputs: RCA, XLR
- Analog Outputs: RCA, XLR
- Signal-to-Noise Ratio: >-122dB
- Total Harmonic Distortion: <0.0004%
- Headphone Output: 4 pin XLR, 6.3mm phone-jack
- Dimensions: 300×66×220 mm (W×H×D)
- Weight: 4kg