Kronos Pro Turntable Review image

Kronos Pro Turntable Review


That afternoon, at HiFiReport, I experienced an unforgettable performance of Liszt’s Hungarian Rhapsody No. 2, from the album “Rhapsody” with a black cover featuring the profile of conductor Leopold Stokowski.

The strings were rich and grand, with an overwhelming momentum and astonishing dynamics.

I also heard a lively and authentic jazz performance, as if I were in a small bar, listening to the live music.

I further understood why the piano is called the king of instruments, as its magnificent and splendid sound was fully displayed.

This time, the music was not played on a dCS system, but on the latest vinyl turntable brand introduced by HiFiReport—Kronos Audio, specifically the limited flagship model, Kronos Pro.

The listening session for the Kronos Pro took place in the spacious listening room of the distributor HiFiReport, where even the large Magico Q7 MK2 speakers did not feel cramped.

Signature Technology Solves Turntable Vibration Issues

Kronos Pro Turntable Review

Louis Desjardins, the owner of Kronos, visited Taiwan during the 2017 TAA Audio Show and was interviewed by U-Audio’s Dong Hongjun. In that interview, Louis explained why he chose to design a “soft turntable” instead of the more common hard turntable structure used by many high-end turntables. He also explained how he uses dual platters to eliminate vibrations caused by motor torque.

The designer’s explanation is, of course, the clearest. For those interested in these core technologies, please refer to the article “It’s Not Just Me Saying It, It’s Widely Recognized—Interview with Kronos Audio President.”

The complete setup of the Kronos Pro includes not only the turntable itself but also a two-piece power supply, with a battery located beneath the Kronos Pro turntable.

Kronos Audio’s signature technologies are twofold: a special 4-point suspension structure and a dual counter-rotating platter design.

The most critical aspect of vinyl turntable design is vibration handling. For audio, vibration is the enemy of sound quality. Even electronic signals are affected by vibration, let alone a vinyl system that plays music by converting kinetic energy from vibrations into electrical energy.

Therefore, all vinyl turntable designers are working to solve various vibration issues through physical means.

Kronos Audio is no exception. The two core technologies mentioned above are both used to address vibration issues.

Kronos Pro Turntable Review

Their turntables are divided into three models. The mid-range model is called Sparta, which incorporates both technologies. The flagship model, Pro, not only includes the suspension and dual platter technologies but also features more sophisticated design and materials, with superior vibration handling skills.

The manufacturer only provides 250 sets of the Pro, each with a unique serial number engraved on the body, adding to its collectible value.

Another model is the Sparta 0.5, which only has the suspension structure without the dual platter.

For discerning vinyl enthusiasts, at least a Sparta-level turntable is required to enjoy Kronos’s most advanced technology.

However, if you purchase the “half-set” Sparta 0.5, you can upgrade later by paying the difference to add the other “half-set” components, upgrading to a complete Sparta.

This is also an option.

The image shows the main structure of the Kronos Pro and the sandwich structure layer unique to the Pro turntable.

Kronos Pro Turntable Review

Four-Point Suspension Structure, Thoroughly Isolating External Vibrations

The flagship Pro turntable has three layers, supported by four legs.

The bottom layer is fixed, with four sturdy legs supporting it, while the top two layers are suspended.

At the top of the four legs, you can see thick round rubber bands hooking the legs and the layers, keeping the layers suspended.

A gentle push with a finger will cause the top two layers to sway.

This suspension structure can neutralize vibrations coming from the bottom, achieving true isolation.

Louis demonstrated the excellent vibration isolation of the Kronos Pro during an interview. He lightly tapped the bottom layer while the turntable was playing music, a risky move that most turntables cannot withstand. The vibration would transmit to the record, causing the stylus to pick up a loud noise, potentially damaging the amplifier and speakers due to the sudden loud sound.

In the early days, audiophiles playing the 1812 Overture were afraid that the massive cannon blasts would dislodge the stylus, and when it fell back, the sudden surge could instantly burn the speakers.

Kronos Pro Turntable Review

However, Louis’s tapping did not affect the playback at all, demonstrating the effectiveness of the suspension structure.

The black mechanism on the right is the Kronos’s four-point suspension vibration isolation.

There is also a level on the top layer of the turntable.

The four-point suspension system uses rubber components to suspend the top two layers, isolating them from other structures, preventing vibrations from reaching them.

The bottom layer is fixed to the legs, which can be imagined as a standard “hard turntable” structure.

Inside this bottom layer are electronic circuits, with the speed display screen and touch switches located on this layer.

The LED display shows the current speed, with the left screen showing the speed of the upper platter and the right showing the lower platter.

Kronos Pro Turntable Review

To start, lightly touch the left side of the left display screen with a finger to start the motor, and the platter will begin to rotate.

Touch it again to stop.

If you lightly touch the right side of the right display screen, you can switch the motor speed between 33 and 45 RPM.

When starting or switching speeds, the upper platter’s speed is used as a reference, first calibrating to an accurate 33 RPM or 45 RPM, and then the lower platter follows to match the speed of the upper platter.

How does the platter calibrate its speed? There is an optical sensor below the motor on the inside, and both platters have six sticker-like sensors. The optical sensor detects the speed in real-time, with three reference points per second, ensuring precise speed and synchronizing the speeds of the two motors.

According to the manufacturer’s data, the speed error per revolution is less than 0.05%.

In modern audio history, the most famous “soft turntable” (Suspended Turntable) is Linn’s LP12.

Kronos Pro Turntable Review

Similar designs to the LP12 are used by a few other companies, with these turntables using bottom spring suspension typically weighing around 5 kilograms.

However, the Kronos Pro is not like that, with the entire turntable weighing 41 kilograms, including a 16-kilogram platter. Why so heavy? Louis explains, “Sufficient weight is needed to generate rotational inertia.”

In other words, when a rigid object rotates around an axis, the object’s mass forms a force that aids rotation. The higher the mass, the greater the kinetic energy generated by rotational inertia.

However, on the other hand, the platter cannot be too heavy, as it would put pressure on the bearings.

Therefore, Louis had to find the most suitable balance.

The World’s Only Dual Counter-Rotating Platter Design

Additionally, when the motor drives the platter, it generates vibrations due to rotational torque, which Louis also needed to address.

Therefore, he came up with the dual counter-rotating platter structure: “To eliminate this vibration, it’s not about suppressing it, but rather counteracting it with opposing torque. The most effective way to counteract it is to install a platter with the same speed but in the opposite direction.”

Kronos Pro Turntable Review

He explained that this actually utilizes Newton’s second law of motion, using two opposing forces to cancel out the vibration.

This “coaxial counter-rotating” application can also be seen in aircraft.

Traditional single-propeller planes tend to veer to one side due to the inertia of the propeller’s unidirectional rotation, requiring the use of the tail and ailerons to balance the plane.

Later, coaxial counter-rotating propeller planes were invented to counteract the forces that cause the plane to tilt.

Although the forces dealt with in aircraft are different from those Louis addresses on the turntable, the principle is the same.

With the suspension system and dual platter design, both external and self-generated vibrations of the platter are well controlled, ensuring they do not affect the signal pickup of the stylus.

As a result, subtle musical signals can be presented, and the dynamics of the music are more complete.

Kronos Pro Turntable Review

Precision Bearings with Accurate Motors

In addition, Louis also uses materials to reduce vibrations.

Their layers are made of stainless steel—Teflon—stainless steel composites, which have high damping properties.

The bearings are made of aluminum brass, an alloy of aluminum and brass, known for its excellent corrosion and oxidation resistance, often used in harsh mechanical environments such as car engines, aircraft bearings, water supply equipment, and marine facilities.

Using materials typically reserved for these challenging environments in home audio is indeed “overkill.”

However, this “overkill” highlights Louis’s meticulousness in material selection.

For a turntable, the quality of the bearings is crucial, requiring smooth rotation, stable rotation, and quiet operation.

Achieving all these requirements together is not easy.

Kronos Pro Turntable Review

To ensure smooth rotation, friction must be minimized; if the gap between the bearing and the bearing sleeve is too large, the platter may not rotate stably.

Therefore, every high-end turntable manufacturer must perfect the bearings.

The gap between the bearing and the sleeve in the Kronos Pro is very small, only 1/50th of a human hair, and with a little lubrication, it can rotate stably and smoothly.

The motor is also key, as it is the source of vibration for the entire turntable. When the motor is off, there is no vibration, but once it is turned on, vibration occurs.

Belt-driven turntables separate the motor from the bearing and use a soft belt to dampen vibrations.

Louis chose a high-performance brass DC motor, which not only has extremely low vibration but also very low noise, with no audible noise even when the ear is close.

Even though the turntable has been designed according to Louis’s ideals, addressing all the physical issues a turntable might face, Louis was still not satisfied. He enlisted the help of a recording engineer for final adjustments and optimization.

Kronos Pro Turntable Review

He strives to adjust the sound of the Kronos Pro to match the effect of playing master tapes on studio monitoring equipment.

Ultimate Power Supply—Dual External Power Sources

At HiFiReport, there is a central power supply for Kronos, specifically designed for the Kronos Pro, which can be directly placed under the Kronos Pro’s bottom plate.

This power supply contains two high-capacity capacitor “reservoirs,” equivalent to batteries.

The front panel has two needle meters to display the power status.

The back has two outputs, one for each of the Kronos Pro’s motors.

However, the mains power does not directly enter this power supply. There is a separate AC to DC power supply that receives the mains power, rectifies and transforms it, and then outputs pure DC power to this central power supply.

Kronos Pro Turntable Review

Although the power supply for a vinyl turntable is mostly used for the motor, and theoretically very simple, the more meticulous the power supply, the more stable and quieter the motor operation.

Louis aims to create the best turntable, so the power supply for the Kronos Pro cannot be sloppy.

Paired with In-House “Black Beauty” Tonearm and ZYX Flagship Cartridge

The Kronos Pro can use a 10-inch or 12-inch tonearm, and they offer two tonearms for users to consider.

One is the 10-inch Helena, and the other is the 12-inch Black Beauty.

The Black Beauty tonearm uses a single-point support, hydraulic damping arm lift, and a dual-layer carbon fiber arm tube. The outer arm tube is made of 3K 50T carbon fiber of different thicknesses, while the inner arm tube uses unidirectional carbon fiber, with specially selected wood materials sandwiched between the inner and outer arm tubes.

As for the cartridge, it uses the ZYX Universe Premium X MC cartridge, which is not currently listed on ZYX’s official website, but it is highly regarded in the audio community, with some reviews stating it is the best cartridge they have ever heard.

To enjoy the beautiful sound brought by the Universe Premium X, the cost is not small, as this cartridge is priced at $15,400, which alone could assemble a decent analog system.

Kronos Pro Turntable Review

The founder of ZYX, Hisayoshi Nakatsuka, was previously an engineer at Ortofon, responsible for developing cartridges. He later started his own company, founding ZYX in 1986.

The brand name is peculiar, using the last three letters of the English alphabet in reverse order, but it has meaning.

These three letters represent the three elements of analog audio—Time (Z), Amplitude (Y), and Frequency (X). They use multiple patented technologies to eliminate time-axis distortion.

The ZYX Universe Premium X is considered Hisayoshi Nakatsuka’s highest craftsmanship achievement.

Why did Kronos pair it with the ZYX Universe Premium X? Of course, users can pair it with other tonearms and cartridges, but this is Kronos’s recommended combination.

Mr. Luo Linwei from HiFiReport Audio told me that after Louis heard the ZYX cartridge, he liked it very much, so he bought all the stock of this model from the manufacturer. Now, if you want to hear the ZYX Universe Premium X, you have to go to Kronos.

The cartridge uses the ZYX Universe Premium X MC cartridge, which is highly regarded in the audio community.

Kronos Pro Turntable Review

It is paired with Kronos’s own “Black Beauty,” designed with single-point support, using a hydraulic damping arm lift, dual-layer carbon fiber arm tube, and a carbon fiber tonearm base.

Soulution and Magico Flagship Equipment

On the day of the listening session, the phono amplifier used was the Soulution 755, featuring dual mono, discrete circuit design. Its phono amplification circuit section has a maximum gain of 80dB, capable of handling even the smallest MC cartridges.

The output stage is derived from the 725 preamp, with a bandwidth reaching up to 40MHz.

The power supply adopts separate analog and digital sections, with a total filter capacitor capacity of 500,000μF, which is truly impressive.

Interestingly, although the Soulution 755 is a phono amplifier, it has volume control.

The volume control is made of high-precision, low-noise metal film resistors, with a total of 80 steps, and each input (MCx2, MMx1) has independent volume control.

Kronos Pro Turntable Review

Why include volume control? This way, the Soulution 755 can be directly connected to the power amplifier, bypassing the preamp, eliminating one piece of equipment and one signal cable, resulting in purer sound.

There was also a dCS Vivaldi One on the side, which I used as a reference machine.

The phono amplifier is the Soulution 755, featuring dual mono, discrete circuit design. Its phono amplification circuit section has a maximum gain of 80dB, capable of handling even the smallest MC cartridges.

The analog output circuit is derived from the 725 preamp, capable of completely replacing the preamp.

The preamp is the Soulution 725.

However, this was not done on-site. The Soulution 755 was connected to the Soulution 725 preamp, then handed over to a pair of Soulution 701 power amplifiers to drive the Magico Q7 MK2.

The Soulution 725, compared to the previous generation 720 preamp, has enhanced power supply, with over 500,000μF of capacitance, enough to meet any possible dynamic demands.

The dual mono, modular circuit eliminates distortion and noise issues, achieving high separation and high bandwidth ideals. The 725 is Soulution’s flagship preamp.

Kronos Pro Turntable Review

As for the 701 power amplifier, this pair of Soulution’s flagship power amplifiers also features excessive power supply, with each 701 having four 600VA audio-grade switching power modules, and a total capacitance of 1,000,000μF, allowing it to reach a peak output current of 120 amperes.

The Soulution 701 has two modes to switch between. In Dual Mode, it is a dual mono power amplifier. In Mono Mode, it works in a bridged configuration, quadrupling the power, with a single-channel mode output power of up to 1,200W at 4 ohms, and a peak output power of up to 12,000W, making it fearless of any difficult speakers.

The Soulution 701 has an ultra-high bandwidth of 2MHz (-3dB) and a total harmonic distortion of <0.0003% (@50W, 4Ω), with a damping factor exceeding 10,000, making its specifications truly impressive.

The Magico Q7 MK2 speaker cabinet adopts a triaxial matrix frame design, composed of over 100 aluminum alloy, stainless steel, and brass components, with very high mass, damping, and strength.

The core technology of the driver is to reduce Eddy Current electromagnetic eddy currents. When the driver moves, the magnet and the moving voice coil generate chaotic eddy current magnetic fields, causing distortion.

The Magico Q7 MK2 eliminates eddy current distortion by using high-precision components and large magnets, saturating the metal around the voice coil.

The power amplifier is the Soulution 701, which can be used as a stereo power amplifier or bridged into a mono power amplifier. Each 701 has four 600VA audio-grade switching power modules, with a total capacitance of 1,000,000μF, allowing it to reach a peak output current of 120 amperes.

Kronos Pro Turntable Review

It uses IsoTek’s flagship power conditioner “Titan.”

In summary, this system has a common design principle, which is to require extremely low distortion.

Every piece of equipment is designed to eliminate known distortion issues as much as possible. Soulution is like this, Magico is like this, and the Kronos Pro system is also like this.

The speakers use Magico Q7 MK2, with a triaxial matrix frame design, composed of over 100 aluminum alloy and stainless steel components, with very high mass, damping, and strength.

Lifelike and Realistic

How does it sound? Beautiful.

When we remove the distortion issues, the beauty of the music itself can be reproduced.

I believe that the beauty of music is not something that audio equipment can add to; audio equipment cannot make music more beautiful.

Instead, what audio equipment can do is reduce all the problems that affect music playback, so that the beauty of music can be revealed.

The more advanced the audio equipment, the more sophisticated the system, the fewer the “bad elements” that affect the sound.

This HiFiReport audio system, from the ZYX Universe Premium X cartridge, Black Beauty tonearm, Kronos Pro turntable, through the Soulution 755 phono amplifier, 725 preamp, 701 power amplifier, and finally the Magico Q7 MK2 speakers, each stage of the equipment reduces distortion, allowing me to hear pure tone, realistic texture, complete dynamics, lively music, and expansive soundstage.

Only then can the music be fully presented.

Listening to Dave Brubeck’s “Time Out,” a 1959 album that is a must-have for jazz and audio enthusiasts.

This is not only because the music is enjoyable but also because it was recorded at Columbia’s 30th Street Studio, known as “the Church,” with excellent acoustics, producing many classic recordings, including the Time Out album.

Additionally, the album’s compositions are full of experimentation, especially in the use of unusual rhythms, including the rare 9/8 and 5/4 time signatures.

Kronos Pro Turntable Review

The first track on side A, “Blue Rondo á la Turk,” draws on the rhythm of Balkan music, played in 9/8, making the music intriguing and playful from the start.

The music begins with Brubeck’s piano, starting with a two-beat group, followed by three groups of two beats, and then a three-beat rhythm, forming a nine-beat piece.

After a nine-beat measure, Joe Morello’s drums and Eugene Wright’s bass join in, and by the third measure, Paul Desmond’s alto saxophone enters.

The strange yet interesting opening is accompanied by lively music, with lively and lifelike drum sounds, and the delicate sound of cymbals with a slight upward tail.

The layered, tangible drum sound is “truly real.”

Paul Desmond’s playing is distinctive, and the rich texture of the saxophone is captivating.

In the middle of the music, the tempo slows down, but if you listen closely, it’s still in 9/8 time. Here, the saxophone has a truly charming, sticky quality, with a special flavor that only vinyl playback can bring to the saxophone.

Kronos Pro Turntable Review

The second track also begins with Brubeck’s piano solo, with round and solid piano notes, the right hand’s arpeggios bringing out a brilliant glow, while the left hand’s bass sometimes gently accompanies and sometimes gives the music the weight it deserves.

After more than two minutes of piano monologue, the melody changes, and the drums, bass, and saxophone rush in, creating a joyful atmosphere.

At this point, I noticed the bass in the background, deep and massive, with each pluck having a powerful release. The Q7 MK2 is indeed impressive, as reproducing such low frequencies is not a problem at all.

However, I thought to myself, if it weren’t for the ZYX cartridge, if there were no Kronos Pro turntable, if it weren’t for Soulution, how could such a wide frequency range and dynamics be fully restored? At this point, the music transitions to the third track, after a piece in 4/4 “normal rhythm,” the famous “Take Five” is a 5/4 piece, starting with a drum set full of agitation, with the piano joining in to develop this peculiar rhythm, and Desmond joining in to bring out the melody.

Here, the saxophone is thick yet lively and agile, with excellent sound thickness.

The middle section’s drum sound is very tangible, with the kick drum deep and weighty, solid and dense, with a slightly loose texture, extremely charming.

The bass here is equally stunning, with a massive form, thick and plump plucking.

I couldn’t help but sigh: how is it that what I’m hearing this time is different from what I remember? Everything seems clearer, and the three-dimensionality of the sound image is incredible.

Kronos Pro Turntable Review

Interlude—Top Showdown: Kronos Pro vs. dCS Vivaldi One

I also brought a set of two Dave Brubeck compilation vinyl records and a compilation CD, both containing the track “Unsquare Dance.” I wanted to taste the lively flavor again and was curious about what sparks would fly when the Kronos Pro system faced off against the top-tier CD player, dCS Vivaldi One. In this track, the bass and clapping introduce the same unusual 7/4 time, with the piano leading the melody development, and the drum set creating a lively atmosphere through rim shots.

This track is full of movement and has excellent spatiality, very lively.

Through the Kronos Pro system, I heard solid and thick forms, with a very three-dimensional sound source, and the sound was smooth and rich, with a strong blues and country flavor.

Switching to CD, the player was equally outstanding, with more details and richer information in the sound, and the sound was crisp and more impactful.

Is CD better or LP better? This debate will never have an answer, as the two media store music differently, extract information differently, and replay differently. How can they be compared? Is braised fish better or steamed fish better? Both methods have their merits, but we are eating fish in both cases. As long as the fish is fresh and the cooking method is excellent, it will leave a lasting impression.

Astonishingly Huge Dynamics, Sharp Response Speed

Kronos Pro Turntable Review

After listening to Dave Brubeck, I found a rare album at HiFiReport, and I was eager to play it.

What album made me so excited? It was Beethoven’s Piano Sonata No. 23 “Appassionata,” performed by Japanese pianist Ikuyo Kamiya on the Imperial Bösendorfer, the largest piano by Bösendorfer.

This piano has a unique feature: the Imperial is currently the only concert grand piano with 97 keys, nine more than a regular piano, with a complete C0 octave.

After winning the first prize in the Japan Music Competition, Ikuyo Kamiya went to Germany for further studies. After participating in the 1972 Queen Elisabeth Competition in Belgium, she was invited to perform in various places, not only as a soloist but also frequently collaborating with chamber orchestras.

This 45 RPM record was published by RCA in the early years and is now out of print. To find a NM (near mint) condition record in the second-hand market, the starting price is at least $100.

Mr. Luo also acquired this record from an online auction, and it is in excellent condition, with a quiet background and clean sound quality.

I could hear Ikuyo Kamiya’s powerful playing, with the impact of the piano sound in the intense and strong passages having a full sense of shock, direct and strong.

Kronos Pro Turntable Review

In the gentle and slow sections, the round notes laid out Beethoven’s depth and contemplation.

When playing fast, the storm-like piano sound was like machine gun bullets, making me hold my breath to listen.

Who says vinyl must be warm and relaxed? A well-tuned vinyl system can have speed, dynamics, and impact, but without any sharpness or harshness.

The Soulution and Magico Q7 MK2 system also played a crucial role. Without their pure and clean sound base, wide and huge frequency range, and dynamic reproduction capabilities, how could I hear such a shocking “Appassionata”? Moreover, without the spacious and high-ceilinged space on the first floor of HiFiReport Audio, how could there be such an effortless sound? Audio is truly interconnected, from the front-end to the back-end equipment, to the entire space, every link is important.

Delicate, Smooth, and Three-Dimensional Violin, Extremely Charming

Listening to David Oistrakh’s performance of Beethoven’s Violin Concerto, accompanied by the French National Radio Symphony Orchestra, conducted by Andre Cluytens.

This recording was originally released in both mono and stereo versions by Columbia, and I am listening to a later reissue under EMI.

The orchestra’s energy is full and rich, with a sound that has a touch of smoothness and roundness, especially in the string section, which has an outstanding silky feel. When a strong performance is needed, the power is immediate, and the dense music rises instantly, with the orchestra’s performance showing clear and natural layers of energy.

Kronos Pro Turntable Review

Although I previously compared the Kronos Pro system with the dCS Vivaldi One and found that the CD had more detailed information, here, with only vinyl, I don’t feel any loss of detail. I can hear a lot of information, especially when David Oistrakh’s violin sound comes out, which is warm and thick, with delicate bowing details, and even the orchestra’s instruments, especially the woodwinds, always appear round and three-dimensional, quite realistic.

Without sufficient information, there would be no realism.

When Oistrakh plays in high positions, the violin sound is very stable, which is the master’s skill and the Kronos Pro’s playback ability.

The Most Exciting Rhapsody

What made my blood boil even more was Leopold Stokowski’s famous “Rhapsodies” album, listening to Liszt’s Hungarian Rhapsody No. 2. Hearing this piece that day, even if I took a taxi to HiFiReport Audio, the fare was worth it.

The orchestra is not a particularly remarkable one. The RCA Victor Symphony Orchestra was formed at the time to record for RCA Victor, gathering musicians from the New York Philharmonic, the Metropolitan Opera, the NBC Symphony Orchestra, and other orchestras, even chamber orchestras, to form a “ragtag band.”

However, despite this, this ragtag band did leave many popular recordings during the heyday of the record industry, and this album conducted by Stokowski is one of them.

Kronos Pro Turntable Review

How many brilliant moments are in this record? On this system, I believe I heard them all.

If anyone had previously reviewed this record, I believe I heard no less than any of them, perhaps even more.

The orchestra’s sound is full of energy, surging and rolling in, with the thickness and density of the strings being top-notch, and the woodwinds displaying a graceful and moist texture, with the clarinet having a slippery feel.

The strings sway with a sense of stepping out in dance, with the low strings being thick and dense, and the Magico Q7 MK2 presenting all of this nearly perfectly, or perhaps perfectly, as I can hardly imagine it being better.

I truly admire the Kronos Pro’s ability to extract information. In fact, this should be the cartridge’s ability, but if the Kronos Pro didn’t minimize all interference factors, how could it fully reproduce the information extracted in real-time? If any vibration interference was also picked up by the cartridge, I wouldn’t hear such a huge contrast or such a wide dynamic range.

What am I listening to? Whose credit is this beautiful sound I’m hearing? It’s really hard to say, but as I mentioned earlier, every link is important, and none can be missing.

Kronos Pro did what a turntable should do, and did it extremely well, giving these pieces of equipment such a large space to perform, giving them a sky.

Opening a Sky for Music

Kronos, Cronus, is a deity in Greek mythology, one of the 12 Titans, and the father of Zeus, the king of the gods.

The story goes that Gaia, the mother of the earth, gave birth to Uranus, the father of the sky. Uranus then mated with Gaia and refused to stop, with the 12 Titans conceived in Gaia’s womb but unable to be born.

Gaia instructed Cronus to castrate Uranus with a knife, driving away Uranus, who had long oppressed Gaia, releasing the Titans and completely separating the sky and the earth, allowing the earth and the sea to more richly nurture life.

This is the mythological story of Kronos.

In the 21st century, we know that the myth of Cronus and the Titans is not true, but there is a newly born Kronos that, like the mythical figure, has opened a sky for music.

This is the needle meter on the power supply under the Kronos Pro, with two meters showing the power status of the two built-in batteries.

On the top layer, below the Kronos logo, is engraved “189/250,” because the Pro turntable is a limited production, with only 250 units worldwide, and this is the 189th unit.

This is a photo of the initial unboxing and assembly record provided by the distributor.

The Kronos Pro is packed in a flight case, and when opened, the contents are taken out, clear and straightforward, at a glance.