NuPrime CDT-8 Pro CD Transport Review image

NuPrime CDT-8 Pro CD Transport Review


In the past, standalone CD transports were only seen in the high-end market. However, as the CD market has gradually shrunk, it’s become difficult to find even a CD player, let alone a CD transport.

Despite DACs being the mainstream digital source equipment now, it’s undeniable that many music collections from the 50s and 60s are still predominantly CD-based.

While ripping CDs to digital files stored on a computer or NAS is an option, it is a time-consuming task, and finding a robust CD drive is increasingly difficult.

In just a few short years, CDs have become like floppy disks, with suitable playback equipment hard to find.

However, NuPrime, known for its compact design and high cost-performance ratio, seems to have heard this demand. They have launched the standalone CDT-8 Pro CD transport, allowing those who already own a DAC to avoid the hassle of finding CD playback equipment.

Equipped with SRC Circuitry

Functionally, the CDT-8 Pro is akin to the CDP-9 without the DAC circuitry. It shares many similarities in internal components and specifications with the CDP-10.

NuPrime CDT-8 Pro CD Transport Review

Firstly, the CD reading mechanism and circuit design are the same as the CDP-9.

The laser head is controlled by the Philips SAA7824HL chip, and after the audio recorded on the CD is read by the laser head, the AMR LPC2103F handles error correction.

The CD reading mechanism itself is produced by Stream Unlimited, a company founded by former Philips Austria employees. In addition to standard Red Book CDs, it can also read CD-R and CD-RW discs, allowing users to burn various audio files onto these discs and play them through the CDT-8 Pro.

Like the CDP-9, the CDT-8 Pro also features an SRC (Sampling Rate Converter) function, allowing users to specify the sampling rate of the CDT-8’s digital audio output.

To reduce jitter, the CD audio is upsampled to 60 times the sampling rate after being read by the laser head and entering the CDT-8 Pro’s circuitry. However, through the SRC selection, users can specify the sampling rate of the CDT-8’s digital audio output.

Thus, through the CDT-8 Pro’s coaxial, I2S, and AES/EBU output terminals, it can output PCM files at 44.1 KHz, 48 KHz, and multiples of 1, 2, 4, and 8, as well as DSD64, DSD128, and DSD256 files.

The optical output supports lower sampling rates, with PCM files outputting up to 176.4 KHz/196 KHz, and DSD only in DSD64 format.

These different SRC settings can be used in various playback modes. For example, when playing Red Book CDs, 44.1KHz multiples of SRC can be selected. When playing digital audio files on CD-R or CD-RW, 48 KHz multiples of SRC can be chosen. For I2S output, DSD SRC settings can be selected.

NuPrime CDT-8 Pro CD Transport Review

This functionality allows the CDT-8 Pro to output formats with higher sampling rates than 44.1KHz/16bits, enabling the DAC to restore a more perfect analog waveform.

Provides I2S over HDMI Output Interface

In addition to the SRC function, the CDT-8 Pro has another extremely important feature: an HDMI terminal that outputs I2S signals.

The main difference between I2S and digital outputs like S/PDIF and AES/EBU is that I2S signals and clock signals travel independently, theoretically resulting in better sound quality.

However, before this review was officially published, NuPrime had not yet released a DAC capable of receiving I2S signals. The company stated that they plan to release a DAC with an HDMI input terminal, named “EVO,” capable of receiving signals from the CDT-8 Pro around October this year.

Besides waiting for NuPrime to release the EVO DAC, currently available DACs with I2S reception capabilities include PS Audio’s Directstream, Audiobyte’s Black Dragon, and Wyre 4 Sound’s DAC-2v2 and DAC-2 DSD, all using HDMI as the I2S signal reception interface. The company also stated that they have tested the CDT-8 Pro with PS Audio Directstream, and it played smoothly, indicating that the HDMI pins of the CDT-8 Pro and PS Audio Directstream are compatible.

To ensure better sound quality performance from the CDT-8 Pro, the company has put considerable effort into its power supply.

The CDT-8 Pro uses a shielded R-core transformer as a linear power supply, which is more reassuring compared to the external power supply used by the CDP-9 CD player. It also allows users to replace the power cord, which suits the preferences of audiophiles.

NuPrime CDT-8 Pro CD Transport Review

Additionally, an isolation transformer is installed at the digital coaxial output terminal to eliminate noise.

Besides the rigorous power design, the bottom of the CDT-8 Pro’s body is equipped with vibration-damping cones, preventing the slim CDT-8 Pro from being affected by ground vibrations.

Immediate Impact of SRC

For this review of the CDT-8 Pro, the company thoughtfully provided the DAC-9 preamp + DAC for pairing. Although the DAC-9 does not have an I2S HDMI interface, the combination of the two perfectly showcases the sound quality of NuPrime’s digital source.

The connection between the CDT-8 Pro and DAC-9 uses Early Bird’s digital coaxial cable.

For the power amplifier and speakers, I used the Linear Acoustic LAV 60II integrated amplifier (set to by-pass mode) and drove the Capriccio Continuo Admonitor speakers + Submonitor subwoofer combination.

Initially, I played pianist Ilse von Alpenhein’s performance of Mendelssohn’s “Spring Song” from Op. 62 (Philips 438 709-2).

Through this transport and DAC setup, I could clearly feel the pianist’s fluid and smooth performance, and the piano’s rich and rounded tonal quality was appropriately presented.

NuPrime CDT-8 Pro CD Transport Review

However, I noticed that the bass notes seemed to stick together like overheated tapioca pearls, and the transient details of the mid-high notes sounded slightly blurred, making the sound not very clean.

When I activated the transport’s SRC function and set it to 44.1 KHz, I could clearly feel the system’s sound becoming cleaner, with a more complete harmonic structure, giving the piano’s tone a more pearly luster and cleaner notes.

As the SRC sampling rate increased to 176.4 KHz, each note’s edge became clearer and more defined, and the bass notes were more distinct.

After listening to the elegant piano solo, I played “La Musica Cubana” from “Buena Vista Social Club” (World Circuit WCD-0065) to test the CDT-8 Pro with a more lively track.

Playing this track, I could feel the comfortable listening experience of the drum and double bass reproduced by the NuPrime transport and DAC combination. The sound was not only wide and elastic but also had no blurred edges, maintaining the clarity of other instruments and vocals.

As for Ibrahim Ferrer’s voice, although it was full of the richness and emotion of years, it seemed to blend with the chorus repeatedly singing “Musica, me musica cubana,” making it difficult to perceive a clear spatial distance between the two.

Additionally, the sibilant sounds at the beginning of Ibrahim Ferrer’s singing sounded a bit sharp, slightly drawing attention to the vocals.

Just as I was feeling slightly disappointed with this sound, I suddenly remembered that this CD transport also had an SRC upsampling function. Out of curiosity, I activated the SRC to see how the system’s sound would change.

NuPrime CDT-8 Pro CD Transport Review

As a result, just by setting the SRC to 44.1 KHz, I could immediately feel a significant improvement in sound quality.

The most noticeable difference was the purer background, with clearer edges, and the fuzzy, rough listening experience was instantly swept away.

Next, the spatial sense of depth and distance suddenly became clearer, especially the distance between Ibrahim Ferrer’s voice and the chorus, making the system’s sound image perspective immediately apparent.

Finally, I found that the high-frequency performance was more vivid, making instruments with rich high-frequency content sound more realistic and bright. For example, the cymbal sounds in the music, which initially sounded dull, became more lustrous and detailed after activating the SRC, yet sounded smoother and not harsh.

Exceptional Detail Reproduction

After listening to the passionate Cuban music, I moved on to the elegant and delicate Monteverdi madrigals.

I played “Con Che Soavità, Labbra Odorate” from Monteverdi’s “Fourth and Fifth Books of Madrigals” (L’Oiseau-Lyre 455 718-2), performed by Emma Kirkby.

Listening at the 44.1 KHz SRC setting, I found that Emma Kirkby’s delicate and soft voice, like a fine brush painting, was able to convey the myriad dynamic changes through NuPrime’s digital source. Whether it was the subtle vibrato in soft singing or the powerful singing at the highest note as the piece concluded, NuPrime could express these dynamic differences in great detail, demonstrating the system’s excellent ability to reproduce both large and small dynamics.

NuPrime CDT-8 Pro CD Transport Review

As for resolution, it is a strong point of this transport and DAC combination. The harpsichord and lute accompaniment exhibited clear and specific transient details at the beginning of each sound, allowing one to clearly perceive the mechanical action of the harpsichord plucking the strings and the image of the musician plucking the strings with their fingers.

Although the tail-end performance of this piece through NuPrime’s system was slightly lacking, making the sound too direct and missing the “oil painting-like” noble quality, considering the price of this combination, such clean and realistic performance is already quite remarkable.

Next, I played the title track “The Wilhelm Scream” from James Blake’s self-titled album (Atlas ATLAS02CD).

This electronic music track, rich in soundstage effects, when played through this combination, lacked depth and failed to present the carefully crafted fun by James Blake if the SRC was turned off.

However, when the SRC was set to 44.1 KHz, the music created a high arc in front, with James Blake’s voice sometimes appearing dead center and sometimes seemingly coming from all directions, such vivid changes were not as present when the SRC was off.

Additionally, with the SRC activated, not only was the bass rhythm more solid and powerful, but each sound effect was more tangible and prominent, and the soundstage was more expansive.

Finally, I played the second act of the opera “Aida” (Decca 417 416-2), where Radames returns triumphantly, and the army parades into the city.

Listening to this majestic segment through this system, the image was positioned far behind the Dynaudio Contour 60, with the soundstage width approximately the same as the two speakers. I needed to adjust the DAC-9’s volume to 50 dB to achieve the appropriate volume.

NuPrime CDT-8 Pro CD Transport Review

However, after adjusting the CDT-8 Pro’s SRC to 44.1 KHz, I could clearly perceive the space between the orchestra and the choir, making their relative positions more distinct.

Additionally, the details and contours of the vocals and choir became clearer and more defined, especially the brass instruments, which, after activating the SRC, appeared in front of the speakers, with a more brilliant luster, creating a vivid listening experience.

For Resolution, Increase SRC; For Warm Vocals, Decrease SRC

In the previous listening tests, I mentioned that setting the CDT-8 Pro’s SRC to 44.1 KHz significantly improved clarity, soundstage perspective, and the luster of metal instruments. However, does increasing the SRC frequency further enhance the listening experience? After personal testing, my answer is: not necessarily.

Regarding the impact of the CDT-8 Pro’s SRC on sound, several points can be discussed.

Firstly, when listening to CDs, SRC at 44.1 KHz multiples sounds much better than SRC at 48 KHz multiples.

The former has excellent reproduction capabilities for spatial depth and the clarity of edges, while the latter sounds slightly blurred, and the soundstage height is reduced, which is detrimental to the listening experience.

This difference is not surprising, as the CD’s sampling rate is 44.1 KHz/16 bits. Listening with SRC at 44.1KHz multiples likely results in less jitter than SRC at 48 KHz multiples.

NuPrime CDT-8 Pro CD Transport Review

Additionally, within the 44.1 KHz multiples of SRC, the higher the sampling rate, the richer the details and the more cohesive the form.

However, does this mean that the higher the SRC sampling rate, the better the sound? I found that this varies with the type of music.

For Mendelssohn’s piano solo piece at the beginning, as the sampling rate increased, each note became purer, and the sound particles more distinct.

However, when listening to vocals at 88.2 KHz or 176.4 KHz SRC, the vocal line did not sound as moist and full as at 44.1 KHz, and the texture seemed slightly dry.

Therefore, if users are unsure about choosing the SRC sampling rate, I believe 44.1 KHz is a safer and more reliable choice.

Finally, the PCM and DSD sampling rates of SRC also affect the listening experience.

When adjusting the SRC to DSD64 or DSD128, I found that regardless of the music played, the background was cleaner than with SRC at 44.1-192 KHz. However, unfortunately, the soundstage height was also slightly less than with SRC at 44.1 multiples.

Given that I2S data is transmitted at a clock frequency of 2.8224 MHz, perhaps the DSD sampling rate SRC settings play a more significant role in I2S transmission.

NuPrime CDT-8 Pro CD Transport Review

At this point, I believe readers, like me, have a question: whether the SRC is turned off or set to 44.1KHz, the CDT-8 Pro outputs a 44.1KHz digital signal. So why is there such a difference in sound quality? I asked the manufacturer, and they explained that the key lies in the “upsampling” process.

As mentioned earlier, regardless of the SRC format or sampling rate output, the digital signal undergoes a 60x upsampling process, which not only upsamples but also allows the digital audio to be controlled by the clock signal. Therefore, activating the SRC naturally enhances the sound quality.

Reliving Youthful Music is Not a Dream

The CDT-8 Pro features an I2S HDMI output interface. During the review period, NuPrime had not yet released a DAC capable of receiving I2S, and I did not have time to borrow a third-party DAC with an HDMI interface to use with the CDT-8.

However, in the short two weeks I spent with the CDT-8 Pro, it provided me with a loyal and clear listening experience and a stable and secure operation feel.

More importantly, thanks to the arrival of this CDT-8 Pro, many CDs that had been collecting dust at home were once again brought to light. The memories of selecting CDs at record stores during my student days, carefully listening to music, and reading the explanatory booklets flooded back.

A CDT-8 Pro, priced at less than $1,000 USD, allows one to relive such beautiful youthful memories and let old CDs sing again, which is priceless.

During the listening test, the NuPrime DAC-9 DAC was used.

The back of the DAC-9.

Although the DAC-9 does not have an I2S interface, it can still support DoP DSD64 format through coaxial.

Equipment Specifications

  • NuPrime CDT-8 Pro Transport Type: CD Transport
  • Outputs: Coaxial x1, Optical x1, HDMI (I2S) x1, AES/EBU x1
  • Dimensions: 235 x 55 x 281 mm
  • Weight: 2.1 kg