Oppo BDP-103D SE Blu-ray Player Review
In the past, Blu-ray players were largely viewed as ordinary consumer electronics, with sound quality that rarely impressed audiophiles. However, the introduction of Oppo changed this perception dramatically. With its powerful features and well-designed Blu-ray players, Oppo quickly overshadowed many mainstream brands. Interestingly, at the same time, the AV review website Audioholics revealed that the high-priced Lexicon BD-30 Blu-ray player had nearly identical internal circuitry to the Oppo BDP-83.

Collaboration for Transformation
Today, Oppo’s Blu-ray players are in their third generation, comprising the standard BDP-103 and BDP-105 models, along with the BDP-103D and BDP-105D featuring Darbee image processing technology. These players are considered among the best in their class, but for DIY enthusiasts, any equipment can be significantly improved with minor modifications. The BDP-103D SE is the latest model we received for testing.
The original BDP-103D features the “Altera Cyclone IV” Darbee image processing chip, which serves as an upgraded version of the BDP-103’s video processing capabilities. For audio processing, it utilizes the Cirrus Logic CS4382A DAC, which can decode 192kHz/24 bits PCM and DSD64 digital audio. It also incorporates the low-noise NE5532A operational amplifier and uses high-grade capacitors along with 7.1 channel analog output connectors. For further details on other circuit designs, the Oppo website has extensive explanations.

Concerning the Special Edition upgrade, the main areas of improvement are as follows:
- The “Altera Cyclone IV” Darbee video processing chip has been optimized to enhance image quality further.
Power Supply, Vibration Damping, and Analog Circuit Improvements
Firstly, Far East Global significantly strengthened the vibration damping capabilities of this Blu-ray player. Upon opening the unit, you’ll notice industrial-grade adhesive strips adhered to the underside of the top cover and above the disc reading mechanism, covered with aluminum foil. Pressing these strips reveals their slight elasticity, while the configuration and quantity of these strips are the results of extensive testing by Far East Global. This treatment helps suppress vibrations from the chassis and reading mechanism without overly dulling the sound, maintaining a vibrant audio profile.

Next, improvements were made to the power supply circuit. These include:
- The upgrade of connection wiring from the power input to the transformer circuit board to single-strand copper-plated silver wire.
- The use of German-made ELU fuses on the transformer circuit board, which are well-regarded in the audio community and are likely to have an immediate positive effect on sound quality.
- Replacing the original Acon capacitors on the voltage circuit board with Panasonic FC aluminum electrolytic capacitors, acknowledged in the DIY community as high-quality audio capacitors.
In the modified version, the AC connection also features single-strand copper-plated silver wire, while the fuse is upgraded to a Telos QBT-18, and the filtering capacitors are converted to Panasonic FC aluminum electrolytic capacitors.

Lastly, Far East Global made improvements in the analog audio circuit. They replaced the analog audio circuit board’s capacitors with Panasonic FC aluminum electrolytic capacitors and upgraded the operational amplifier chips for each channel from NE5532A to OPA2132. The OPA2132 is a FET structure with a wider output voltage range, likely to significantly enhance audio quality.
Outstanding Sound Quality and Musicality Rivaling Hi-End Players
The BDP-103D SE not only plays BD, CD, and SACD formats but also supports audio playback via USB ports located at the front and Ethernet ports at the rear for DLNA streaming.
I had on hand several hybrid SACDs and pure music BDs released by European labels such as BIS, MDG, Harmonia Mundi, and Divox. These hybrid SACDs provide stereo audio on the CD layer and multi-channel audio on the SACD layer. However, many high-end SACD players are prohibitively expensive and often only offer stereo analog output, limiting their ability to reproduce the full multi-channel experience.
Previously, I had used consumer-grade universal BD players to listen to hybrid SACDs and pure music BDs, but the sound quality was often disappointing. Since the BDP-103D SE’s audio circuit is inherently excellent and further refined, I decided to use these SACDs and BDs as primary test material.
The front of the unit features a Type-A USB input to play audio files from USB drives. Additionally, the rear offers an Ethernet port for DLNA playback. The two HDMI outputs can be adjusted for color space and deep color bit functionality.
The listening tests for the Oppo BDP-103D SE were divided into stereo and multi-channel modes. The stereo tests focused on the player’s audio quality and tonal characteristics, while multi-channel tests examined its surround sound performance.
In the stereo mode, I used the Oppo BDP-103D SE as an SACD/CD player, connecting it to my reference integrated amplifier, the Linear Acoustic LAV 60 II, which drove my reference speakers, the Capriccio Continuo Admonitor bookshelf speakers with Submonitor subwoofer. The cabling consisted of Crystal Cable Micro-Diamond RCA signal cables and YPL S-50 speaker cables.
Before playing the SACD, I needed to select the desired playback layer on the Blu-ray player’s menu: multi-channel for the SACD multi-channel layer, stereo for the SACD stereo layer, and CD mode for the CD layer. Furthermore, the HDMI output audio format had to be chosen; selecting PCM converts the DSD signal from the SACD layer to PCM output.
Before playback, I ensured the AV amplifier’s channel configuration matched the listening room setup, especially regarding whether to include a subwoofer; incorrect settings would mean a significant loss of bass.
I began by playing the second track “Noodle Effect” from the Hybrid SACD of “The Spirit of Turtle” (Northstar TRSA75538). After setting the Oppo BDP-103D SE to read the SACD layer, the playback revealed an expansive soundstage slightly wider than the speaker setup, with depth extending beyond the speakers. The piano sound was centered in front, while the drums were positioned behind and slightly left, and other percussion instruments were situated to the right. This demonstrated the upgraded player’s impressive spatial reproduction and localization capabilities.
In terms of audio quality, the sounds of various percussion instruments—whether metallic or wooden—were vividly realistic and specific, sounding incredibly lifelike. Additionally, listening through the Oppo BDP-103D SE allowed me to perceive various transient details generated during instrumental performances, as well as the rich reverberation in the recording space. The tonal quality was warm, with well-defined low frequencies that felt rich and full-bodied. There was no trace of the typical “AV flavor”; instead, the sound was immersive and enjoyable, free from listener fatigue.
To confirm my impressions, I compared the BDP-103D SE with our reference source, the Audiomeca Kreatura CD transport plus Elixir DAC. I discovered that, while the Audiomeca’s source showcased greater clarity in tonal presentation and wider sound textures, other attributes such as soundstage size, dynamics, and tonal warmth were surprisingly close. Moreover, some equipment encounters significant differences in sound quality and volume when switching between CD and SACD layers. However, the BDP-103D SE exhibited no such issues. If I had to describe the slight differences, I noted that this upgraded Blu-ray player presented a fluffier texture during SACD playback, creating a greater sense of air, while the CD layer offered clearer transient details, better revealing the crispness of cymbals and the mechanical intricacies of piano performances.
Though these differences exist, they are only perceptible under close scrutiny.
Multi-channel Listening Offers an Immersive Experience
With the stereo listening confirming the BDP-103D SE’s audio characteristics, I proceeded to pair it with the Integra DRX-5 surround amplifier for multi-channel listening. Although the BDP-103D SE features 7.1 analog output terminals, I lacked enough matching RCA signal cables in the listening room. Instead, I configured the BDP-103D SE as a transport, transmitting digital signals via HDMI Out 2 through an MPS HD-280 HDMI cable to the Integra DRX-5 for decoding.
For speakers, I used the Capriccio Continuo Admonitor bookshelf speakers and Submonitor subwoofer for the main channels, paired with a set of KEF LS50s for surround sound, and an AE 101 speaker placed horizontally for the center channel. Given that the main speakers were considerably larger than the others, I connected the Integra DRX-5’s main channel pre-out to the Linear Acoustic LAV 60 II in bypass mode, allowing it to drive the main speakers, while the other channels were powered directly by the Integra DRX-5.

With all settings in place, I began playing the first movement of “Concerto for Bangdi” from “The Hu Xuan Dance” (BIS-SACD 1759). During playback through the five-channel system, I clearly distinguished the dimensions and layering between the solo flute and the orchestra, with harmonious balance preventing the orchestral sound from overwhelming the flute.
In terms of percussion, the cymbals had a lingering resonance, akin to gold dust settling around the listening environment, while the drum sounds were both confident and flexible without losing impact. Importantly, the spatial perception gained in multi-channel listening contrasted starkly with stereo mode, where the soundfield felt limited to the front, and the sound images were slightly recessed. However, in surround mode, the enveloping quality improved significantly, and the spatial experience expanded, making the flute’s key presses and melody seamlessly blend with the instrumental harmonies, providing the sensation of being present in a concert hall.
Additionally, at 5:10, a captivating solo for the flute unfolded, starting from a low, soft melody and rising effortlessly. The pure and warm tone of the flute remained intact even at its highest, most powerful notes, showcasing a broad dynamic range that was delightful to listen to.
Next, I turned to Rene Jacobs’ conducting of “St. John Passion” (Harmonia Mundi 802236 37). This album features a special recording layout, with the orchestra on the left and vocals on the right. However, listening in stereo mode, the sound remained front-centric, lacking any remarkable distinction. Seizing the opportunity, I switched to surround sound mode and was astonished to find the entire orchestra filling the left side and the choir occupying the right. Meanwhile, instruments like the lute, harpsichord, and double bass, providing continuous bass lines alongside narration of the Passion, were positioned in front of me.
While the stereo mode felt akin to watching on a flat LCD screen, in surround sound mode, I felt as if I had stepped into a chapel, with the altar and choir stalls on either side hosting the orchestra and choir, delivering a profound interpretation of the Passion of Christ from the Gospel of John.
Finally, I selected the Blu-ray music disc “7 with One Stroke” from Tacet, playing the last track. This music is an arrangement of the aria “Il figlio il reo” from Vivaldi’s opera “Dido and Aeneas,” presented as a Double Bass and orchestra ensemble. Initially, I played the 2.0 channel 24bits/96kHz track, which, though warm and comfortable, lacked depth. Switching to the 5.1 channel 24 bits/96kHz track revealed an expansive soundstage, allowing me to discern the positioning of instruments like the lute and violin upfront, the harpsichord slightly left behind, and the Double Bass directly behind. The resonance of the solo Double Bass, with its rich and soft tones, felt like a gentle massage for my neck and head—a sensation unattainable in stereo mode.
Throughout the listening of these three albums, I employed the BDP-103D SE purely as a transport while leaving D/A conversion to the Integra DRX-5 surround amplifier. How much of an impact does using the Blu-ray player as a transport have on the overall sound quality? Upon comparing the BDP-103D SE to the company’s Sony XXX Blu-ray player, I found that while the Sony provided detailed clarity, it made the melodic lines feel harsh and cold, with sharper edges and a weaker bass. Overall, the comfort and musicality were markedly inferior to that of the BDP-103D SE.
I never expected such a significant difference simply by changing the transport while using the same Integra DRX-5 surround amplifier for digital conversion. Beyond its inherent high performance, the BDP-103D SE benefits from the use of high-quality capacitors, effective power supply management, and solid vibration damping measures, all contributing positively to its sound.
Finally, a Perfect Home for SACD and Music Blu-rays
For a long time, I have sought a Blu-ray player that is suitable for music playback. My encounter with the Oppo BDP-103D SE revealed its tonal performance rivaling that of high-end CD players, making it genuinely captivating. Thanks to this Blu-ray player, I can finally experience the astounding soundscapes and immersive spatial experiences of SACDs and music Blu-ray discs, all while enjoying a pleasing and emotionally rich sonic quality that is neither harsh nor jarring.
What makes this even better is that its price, including modification costs, is within reach for most salaried individuals. Although I have never listened to the original BDP-103D prior to modifications, it is evident that the enhancements made are meaningful and worthwhile investments.
Currently, Far East Global has only one sample of the Oppo BDP-103D SE, which will be sent to another display location after just two weeks here. This brief time together has made it hard to part ways. However, my colleague informed me that the higher-tier BDP-105D SE is next on the way, and I can hardly wait to listen to it.
Upgrade Options for Existing Units
For readers intrigued by the sound charm of the BDP-103D SE, there’s good news! When purchasing a new unit, you can request an upgrade. Additionally, Far East Global offers “semi-mod” and “full-mod” upgrade services for existing Oppo BDP-103 and BDP-103D players. The “semi-mod” focuses on vibration damping and power supply circuit upgrades, ideal for those using the Blu-ray player as a transport. The “full-mod” enhances the analog circuit, perfect for users relying on analog output.
All modification services are carried out by “Auku Audio,” a team comprising experienced AV enthusiasts with professional audio and video backgrounds, ensuring expertise. Moreover, the modified components come with a one-year warranty, assuring you that they will not be neglected post-modification.
Whether you are an existing user or considering purchasing a new 103D, don’t hesitate to reach out to Far East Global to design a custom upgrade plan that meets your needs!
Specifications
- Model: Oppo BDP-103D SE
- Type: Blu-ray player
- Supported Disc Formats: BD-Video, Blu-ray 3D, DVD-Video, DVD-Audio, AVCHD, SACD, CD, HDCD, Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE
- Memory: 1GB
- Output Terminals:
- Analog Audio: 7.1 channels, 5.1 channels, stereo
- Optical/Coaxial Audio: Supports 2-channel/192 kHz PCM, Dolby Digital, DTS
- HDMI Audio: Supports 7.1 channels/192 kHz PCM, 5.1 channels DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution, DTS-HD Master Audio
- HDMI Video: 480i /480p /576i /576p /720p /1080i /1080p /1080p24 /4Kx2K, 3D frame packing 720p /1080p24
- Input Terminals:
- HDMI Audio: Supports 5.1 channels/192 kHz or 7.1 channels/96 kHz PCM, Dolby Digital, Dolby Digital Plus, DTS, AAC
- HDMI Video: 480i /480p /576i /576p /720p /1080i/1080p/ 1080p24/1080p25/1080p30, 3D frame packing 720p /1080p24
- MHL Audio: Supports 5.1 channels/192 kHz PCM, Dolby Digital, Dolby Digital Plus, DTS
- MHL Video: 480i /480p /576i /576p /720p /1080i /1080p24 /1080p25 /1080p30, 3D frame packing 720p /1080p24
- Frequency Response: 20Hz – 20kHz (±0.05dB), 20Hz – 96kHz (-4.5Db ~ ±0.05dB)
- Signal-to-Noise Ratio: >115 dB (A-weighted)
- Total Harmonic Distortion + Noise: < 0.006% (1kHz at 0dBFS, 20kHz LPF)
- Power Supply: ~ 100V – 240V, 50/60Hz AC
- Power Consumption: 35W (standby), 0.5W (energy saving)
- Dimensions: 430mm x 311mm x 79mm
- Weight: 4.9kg