Stein Music Stateline Phono 2 Review
Stein Music was introduced not long ago. Initially, they seemed to focus on audio tuning peripherals, like the Pi record mat and CD mat. After receiving them for review, I kept them for personal use. Although I can’t claim to fully understand the underlying principles, the effects are noticeable, so I comfortably use them with vinyl and CDs.
They also have a unique active indoor harmonic machine, which I witnessed at an audio exhibition. Our editor, Dai Tiankai, has also written a review, noting that it enhances the liveliness of music listening.
It seemed like a company specializing in audio tuning peripherals, so how did they start making phono preamplifiers?
From Tuning Equipment to a Complete Product Line
I turned to Google and visited Stein Music’s website. To my surprise, when I last checked while writing about the Pi record mat, they only had tuning equipment. Now, they offer speakers, preamps, integrated amplifiers, phono stages, and even cartridges. The product line has expanded rapidly.
According to the website, Stein Music was founded by Holger Stein in 1982, starting with indoor resonators. Comparing their development history, these recent years have been a period of rapid growth. At the 2017 Munich Audio Show, Stein Music showcased a full system, including the flagship Topline XL speakers priced at 200,000 euros, attracting attention from European and American audio media.

Fortunately, the Stateline Phono 2 Signature hasn’t seen a price hike. I inquired about the price, and the standard version of the Stateline Phono 2 is priced at approximately $1,600 USD in Taiwan. For a two-piece phono preamplifier with separate power supply, made in Germany, this price is tempting even for me.
However, the version sent to U-Audio by the distributor is not the standard version but the Signature version. From component selection to power supply, everything is upgraded, priced at $5,120 USD, three times more than the standard version. But if you consider the “German brand, German-made” standard, the Stateline Phono 2 Signature is not particularly expensive.
“Clean Box” and “Dirty Box” Separation Design
The Stateline Phono 2 Signature is compact, with a rectangular metal box and an acrylic front panel. The separate power supply unit is the same size as the phono preamplifier itself. This design avoids high-frequency noise from the power supply affecting the phono amplification circuit. Separating the so-called “clean box” from the “dirty box” is a long-standing consensus in high-end audio. Stein Music’s design is not surprising, but it does increase costs, making it challenging to maintain competitive pricing. Therefore, they adopt a Bauhaus-style minimalist philosophy in the Stateline Phono 2 Signature, with a simple yet sturdy structure. The front panel has only a simple toggle switch for power.
The compact Stateline Phono 2 Signature uses differential paired FETs for the input stage and single-ended MOSFETs for the output stage, operating in pure Class A mode.
Rest assured, the phono preamplifier consumes very little power, so it won’t overheat even in pure Class A mode.
The circuit board uses a double-layer PCB, with SMD surface-mount components on one side and through-hole components on the other. Even though SMD microelectronic components are prevalent, many audio designers still believe that traditional-sized electronic components sound better. The design of the Stateline Phono 2 Signature clearly blends tradition with innovation.
Incorporating Various Stein Music Vibration and Tuning Techniques

Upgrading from the Stateline Phono 2 to the Signature version, Stein Music has added many new features: all electronic components and circuit boards are treated with Steinmusic Maestro Lacquer, using a special coating to control mechanical resonance. This is a unique technique that others can’t replicate! Additionally, the Signature version’s power supply includes Stein Music’s InLine Silver tuning, significantly reducing electromagnetic distortion, another unique tuning technology of theirs.
The last notable tuning feature is the four vibration-damping cones of the Stateline Phono 2 Signature, made of round wooden materials, likely a simplified version of their Super Naturals.
The Signature’s power filtering is also more refined than the standard version, incorporating four Telefunken vacuum tubes for filtering, along with 60 Os-Con capacitors. The Os-Con capacitors have a storage capacity of 22,000 pF, allowing for rapid charge and discharge to handle the delicate changes in music dynamics.
Inside the chassis, Stein Music E-Pad+ vibration-damping pads are applied to reduce the impact of power supply vibrations.
The external power supply chassis houses three sets of toroidal transformers, each equipped with Styroflex high-voltage metal film capacitors and KP capacitors, providing stable and low-noise AC power.
When the three toroidal transformers operate, they inevitably generate some vibration. Therefore, holes of varying sizes are drilled on the circuit board, and Stein Music E-Pad+ vibration-damping stickers are applied at the transformer screw mounts and power socket locations.
Indeed, the upgrade details of this Signature version are meticulous compared to the standard Stateline Phono 2 Signature.

Starting with MM Amplification
I brought the Stateline Phono 2 Signature home and paired it with the Elac Miracord 90 turntable for a listening session. The standard factory setup includes an MM cartridge, so I started with MM listening.
The phono amplifier requires switching between MM/MC modes, as well as adjustments for impedance and capacitance. The Stateline Phono 2 Signature conveniently places these switches on the bottom of the chassis. Some manufacturers place the switches inside the machine, requiring disassembly each time you change the cartridge, which is quite troublesome. However, with the Stateline Phono 2 Signature, you only need to flip the machine over. The set of eight DIP switches, along with a set of three DIP switches, allows you to switch all MM/MC cartridge gain, capacitance, and impedance settings.
Moreover, Stein Music thoughtfully prints all the corresponding values for the switches on the bottom of the chassis, knowing you might forget where the original manual is. Just follow the diagram.
The Stateline Phono 2 Signature offers a wide range of adjustable options. Most MM cartridge amplifications don’t require adjustments, but the Stateline Phono 2 Signature’s MM amplification has four adjustable capacitance values: 0pF, 82pF, 150pF, and 232pF. If you’re not familiar with adjustments, you can use 0pF. Generally, increasing the pF value adds some brightness to the high frequencies, but this also depends on the inductance value of the MM cartridge. With the Elac factory MM cartridge I used, setting it to 0pF was sufficient. I didn’t increase the capacitance, and the MM cartridge gain was 40dB.
Even MM Can Beautifully Reproduce Recording Reverberations
I just received the 2018 Kaohsiung Audio Show commemorative vinyl, featuring Chen Zhiyu’s performance of “Bach’s Goldberg Variations,” recorded at the Pingtung Performing Arts Hall. I immediately used it for testing.

The Stateline Phono 2 Signature has very low background noise. You have to get very close to the speakers to hear faint background noise. The MM amplification gain is 40dB, providing ample output power, just slightly less than CD output. You can appropriately increase the preamp volume.
I was fortunate to attend the recording session at the Pingtung Performing Arts Hall. When I heard the audio system reproduce the natural and spacious hall sound, allowing the condensed piano notes to emit exquisite and transparent key granularity, it truly felt like being back at the recording site. I didn’t expect the Stateline Phono 2 Signature to make the MM cartridge sound so good. I used the EAR 834P’s MM cartridge amplification, which had a richer tone than the Stateline Phono 2 Signature. However, the Stateline Phono 2 Signature’s sound base also had a warm hue, but its ability to present spatiality seemed even better.
After listening to a few records with the Miracord 90’s MM cartridge, the Stateline Phono 2 Signature, although a solid-state amplification circuit, had a sound thickness comparable to tube amplifiers. However, I couldn’t just listen to the MM cartridge and move on. I thought it was time to switch to the Goldring Legacy cartridge.
Although I’ve been listening to the Miracord 90 at home for a while, I hadn’t switched to the MC cartridge. This time, for the Stateline Phono 2 Signature, I couldn’t be lazy anymore.
With tools ready—tweezers, hex wrench, Clearaudio calibration ruler, and the newly purchased Rebel electronic stylus pressure gauge—it took about ten minutes to switch and set up, reconnecting the Stateline Phono 2 Signature.
MC Cartridge Shows Its True Colors
At this point, the Stateline Phono 2 Signature was actually placed “upside down,” with the bottom facing up. The reason is simple: I needed easy access to set the DIP switches.

The Legacy cartridge’s impedance is 100 ohms, and the capacitance is 100~1000pF. So, I set the Stateline Phono 2 Signature’s impedance to 100 ohms and chose 100, 500, and 1000pF for the capacitance values, adjusting while listening to see which setting sounded best. I finally settled on 500pF.
The capacitance setting is quite flexible. The extension of high frequencies and the amount of low frequencies vary slightly. You don’t need to strictly adhere to the manufacturer’s specifications. You can even exceed the recommended values. That’s the fun of analog vinyl. As long as the phono amplifier has enough flexibility for adjustments, choose the setting you like best.
Switching to the MC cartridge, the Stateline Phono 2 Signature’s mid-high frequencies became more lively. I initially thought the MM cartridge included with the Miracord 90 was already quite good, but the inherent design advantages of the MC cartridge in the mid-high frequencies still outperformed the MM. However, the Elac MM cartridge didn’t lose out, as it was a complimentary cartridge with the turntable, and the sound was already good. The Legacy, being Goldring’s highest-grade MC cartridge, naturally sounded better, as expected.
Ample Gain and Low Background Noise in MC Amplification
The Stateline Phono 2 Signature’s MC cartridge gain is 60dB, providing ample output energy, and the background noise remains low.
Sufficient gain and low background noise are the basic conditions for choosing MC cartridge amplification. You need enough gain to achieve a large dynamic range of sound. However, when the gain is increased, the background noise of the music will also increase. Therefore, the first test when selecting a phono amplifier is to play music at a normal listening volume and carefully listen for any audible noise in the music background. If there is none, it means the gain is sufficient and the noise is low.
Did the Stateline Phono 2 Signature pass the test? Of course, it did. Among the phono amplifiers I’ve heard, it’s one with relatively low noise.

I continued listening to Chen Zhiyu’s “Bach: Goldberg Variations.” The MC cartridge presented the spatial hall sound in the recording more delicately, with the piano tone radiating a bright hue while maintaining full piano note granularity.
Since switching to the MC cartridge required settings, the Stateline Phono 2 Signature was still upside down. Listening like this didn’t feel right, so I lifted the tonearm to pause, tidied up the cables, and placed the Stateline Phono 2 Signature properly. At this point, I noticed that the power connection cable between the circuit chassis and the power supply chassis was quite stiff. Stacking the two units wasn’t very convenient, a bit awkward. I thought the manufacturer had left a long power cable, so I decided to move the Stateline Phono 2 Signature’s power supply to a distant location, keeping it as far away from the phono amplifier chassis and preamp as possible. When I lowered the tonearm and Chen Zhiyu’s piano sound played, something magical happened!
The Original Power Cable Has a Deeper Meaning
I merely flipped the Stateline Phono 2 Signature over, and how did the sound become more transparent? Is it the magical effect of Stein Music’s wooden vibration-damping feet? I’ve tried many audio mats, and none have been this miraculous. No, there must be something else I haven’t considered. It must be the effect of moving the power supply further away! That’s when it dawned on me. Stein Music left the power cable so long for a reason. They don’t want users to stack the two units together. Even with separate power supply chassis, the power should be kept as far away from the phono amplification circuit as possible. By chance, I discovered a better setup method for using the Stateline Phono 2 Signature: make full use of the extended original power connection cable to place the power supply and amplification circuit chassis far apart, minimizing electromagnetic interference from the power supply.
After switching to the MC cartridge, adjusting the appropriate impedance and capacitance, and moving the power supply away from the MC amplification circuit chassis, I can now listen to the Stateline Phono 2 Signature with peace of mind!
Smooth, Gentle, and Rich in Detail
This phono preamplifier has a warm sound texture, without any harshness or irritation. The mid-high frequency extension is smooth and gentle, effortlessly conveying the flow of analog music.

Listening to the collaboration of Argerich and Perlman in “Schumann, Brahms, Bach: Violin Sonatas,” the Stateline Phono 2 Signature brings out the violin’s silky smoothness, with soft lines. Argerich’s piano notes are rounder, with less aggression, and the music flows easily and smoothly.
On the left: “Schumann, Brahms, Bach: Violin Sonatas.”
On the right: “Bach’s Unaccompanied Cello Suites” by Rostropovich. The music’s flowing lines are warm and comfortable.
When Rostropovich recorded this Bach unaccompanied suite, the location was the Basilique Sainte-Madeleine in Vezelay, Yonne, France. The recording captured the natural hall reverberation, with a spacious sense of space. The contrast with Rostropovich’s concentrated cello sound creates a refreshing and expansive musical line. On the Stateline Phono 2 Signature, you can hear the wide sense of space, with the cello’s tone clear and appropriately thick, and the lines smooth and dense.
Compared to the 834P phono preamplifier, the 834P has larger instrument shapes and a richer tone, with a hint of tube coloration. The Stateline Phono 2 Signature, however, is fresher, but the cello’s rich resonance is still comparable to tube phono preamplifiers.
Switching to “Bach Trio” by Yo-Yo Ma, Chris Thile, and Edgar Meyer, a unique trio of mandolin, cello, and double bass, recorded in folk singer James Taylor’s country barn studio. The recording space feels spacious and relaxed, while the three instruments’ shapes and textures are large and realistic. The newly released vinyl presents a fuller sound image than the CD. Listening through the Stateline Phono 2 Signature, the recording’s liveliness is more vivid than the CD. Turning up the volume, the mandolin’s plucking floats in the air, contrasting with the deep sound of the double bass, with the cello becoming the key “middle melody.” The Stateline Phono 2 Signature presents the texture of the three instruments with a gentle demeanor, weaving a comfortable and relaxed musical scene. While listening to “Bach Trio,” I couldn’t help but wonder: did these three musicians go to Nashville’s countryside barn to record an album, or was it a vacation? Otherwise, how could they create such a relaxed and carefree album?
Effortlessly Showcasing the Quality and Layers of Recordings

I searched the record shelf and found Lori Lieberman’s “A Thousand Dreams,” a favorite for testing vinyl. Starting with the first track, “Song For Asking,” Lori Lieberman’s recording emphasizes the intimacy of the voice, as if the singer is standing right in front of you. The echo effect is minimal, enhancing the sense of presence. The Stateline Phono 2 Signature faithfully reproduces the recording’s effect, with a warm expression.
Switching to the lively “One Thing,” with acoustic guitar, hand drums, bass plucking, and lively harmonica, the Stateline Phono 2 Signature has an appropriate amount of low frequency. It’s not overly abundant, but the low frequency’s vitality and bounce are excellent. The lively music carries a vibrant energy.
Time for a big test! I took out Karajan conducting the Berlin Philharmonic’s “Beethoven’s Ninth Symphony,” of course, listening to the fourth movement, the first symphony in music history to combine symphony and vocals.
The orchestra’s strong play opens with a fierce prelude, timpani rumbling, and double bass laying down a strong low frequency. The musical motifs of the first, second, and third movements appear in turn, all vetoed by the cello and double bass, welcoming the “Ode to Joy” theme. Beethoven starts with the low voices, followed by viola, violin, woodwinds, and brass, each joining in sequence. The atmosphere of “Ode to Joy” builds higher and higher. The Stateline Phono 2 Signature lays out the layers of music in the record in an orderly manner, presenting a balanced musical scene from small to large.
Yes! It’s the sense of musical layers. Even in large-scale musical scenes, the Stateline Phono 2 Signature remains orderly and maintains a comfortable flow of music.
Tempted? Want to Borrow the Standard Version for Comparison
Tempted? Honestly, very tempted. But reason tells me that the version sent by the distributor is the top-tier Stateline Phono 2 Signature. Naturally, it has an impressive sound performance. However, I want to hear the standard version of the Stateline Phono 2. If the phono amplification circuit is the same, but the power supply is more refined, along with Stein Music’s unique vibration-damping coatings and patches, making the Stateline Phono 2 Signature tempting, then how much would the standard version of the Stateline Phono 2 fall short? Perhaps it’s another “value option”? That’s the decision: borrow the standard version of the Stateline Phono 2 for comparison, and then decide.
Equipment Specifications
- Model: Stateline Phono 2 Signature
- Type: Solid-state MM/MC phono preamplifier (with added tube rectification)
- Gain: MM 40dB / MC 60dB
- Capacitance: 0/82/150/232pF adjustable
- Impedance: 25 ohms to 47k ohms, 50-step adjustable