Auralic Leo GX Master Clock Review
Sitting in the Yisheng listening room, I found myself a bit bewildered.
How could there be such a difference?
A few months ago, I auditioned Auralic’s DAC Vega G2 and the digital transport Aries G2, and I was deeply impressed by the sound performance of this combination.
A company that has been around for less than 10 years, with a young president, Wang Xuanqian, yet from him and the company’s products, you can see the strong ambition of this company.
I have always believed that the designer of audio equipment must love music. He may not play an instrument, but he must be someone who enjoys listening to music.

If not, the equipment he designs will not sound good.
Because if he doesn’t know what music is, what kind of sound it should produce, how can he develop ideal audio equipment? Audio equipment should never be purely industrial products; its job is not to reproduce sound but to replay music.
Wang Xuanqian is among the few audio brand designers who excel at playing musical instruments, and notably, he plays classical piano.
This alone makes the Auralic brand stand out, and after hearing the sound, it becomes even more convincing.
So why was I bewildered? Because the sound of the Auralic Vega G2 paired with the Aries G2 was truly excellent, with rich details, clear layers, transparent imagery, wide dynamics, and musical nuances. It was a very beautiful experience.
However, this time at Yisheng, hearing this combination with the addition of the Leo GX master clock, I was confused.
How could there be such a difference? This time, the system at Yisheng was paired with MBL 116F speakers, and the amplifier was the MBL 5011 preamp paired with the 9007 power amp in bridged mono mode.

This system had a strong MBL flavor, with high frequencies exuding a honey-like sweetness, an amber-like hue of aged whiskey, and a deep, rich, and lingering aftertaste. The midrange was richly detailed yet harmonized with the upper and lower ends to produce a non-irritating, full, and warm texture. As for the low frequencies, they were full and relaxed, stable yet not heavy, with a sense of ease in a more forward position, and the soundstage was rich and clear in layers.
However, the 360-degree radiating speakers felt very different from the usual unidirectional, directional speakers.
If Yisheng used Atohm GT3 HD, I think the difference would be even more pronounced.
Even so, the difference was already significant.
The speakers on site were MBL 116F, 360-degree radiating speakers.
Comprehensive Improvement, More Lively and Realistic Music

Where is the difference? Comprehensive improvement.
Take Diana Krall’s “Temptation” as an example. Without the Leo GX, the music’s liveliness was already excellent. The 360-degree radiating speakers indeed had their advantages, with sound naturally dispersing in the air, fully showcasing the liveliness of the tambourine.
Diana Krall’s voice was warm and deep, full of magnetism, with clear details in her vocal nuances and articulation.
MBL’s mid-high range was truly remarkable.
However, with the Leo GX connected, the sound became more cohesive, with better extension at both ends. The metallic impact was not only crisp but also more tangible, with clearer positioning.
The plucking of the bass was tighter, with better granularity; in comparison, without the Leo GX, it seemed a bit loose.

The vocals were not only clearer in form but also in detail, with richer information.
In comparison, with the Leo GX, the music became more vibrant and realistic.
This is where my confusion lies.
I once truly believed that the Auralic Vega G2 and Aries G2 had reached the realm of Hi-End. Such a HiFiReport cutting-edge, reasonably designed source combination was not priced too high, with a unit price still within an affordable range.
However, with the addition of the Leo GX, the sound rose a level, even a three-level jump.
The difference was too great.

So, was my previous listening in vain? This is the true strength of the Auralic G series! After the music starts playing, the Leo GX locks onto the file’s sampling rate.
Above is the Vega G2 DAC, below is the Aries G2 digital transport, which is already an excellent source combination. Adding the master clock Leo GX can further enhance it.
Double the Emotion
Listening to Martha Argerich play Shostakovich’s Piano Concerto No. 1.
Although this piece has a smaller ensemble, with only a four-part string orchestra, a piano, and a trumpet, the music is dramatically dynamic, showcasing the piano’s sound effects and the texture of strings and brass.
With or without the Leo GX, it’s clear at a glance.
With it, the piano’s sound is more cohesive, the notes clearer, and the power more decisively conveyed; when the bass and chords play, the vibration of the strings is more delicate and vivid.

The distribution of the orchestra’s sound is also clearer, with better contour.
The trumpet’s sound gained density, and the thickness not only didn’t decrease but became more outstanding.
The overall flow of the music and dynamic fluctuations also improved; if the emotional impact of the music without the Leo GX was 100 points, then with it, the impact was 200 points or even higher; if just the Vega G2 paired with the Aries G2 could make people applaud, adding the Leo GX could make people stand up and cheer.
I couldn’t believe there would be such a difference.
After listening, I sat on the sofa in the Yisheng listening room, pondering the reason: why such a big difference? Actually, the clock specification built into the Vega G2 was already excellent, with a built-in dual 72 femtosecond master clock, and a dedicated 3uV power supply, making the jitter of this dual femtosecond clock very low.
So, during my previous audition, I felt that the Auralic Vega G2 paired with the Aries G2 had very accurate and clear imaging, with a transparent and unobstructed musical picture, completely embodying the demeanor of a Hi-End source.

I didn’t expect to find out this time that it could perform even better.
On-site, a Melco N1ZH/2 network hard drive was used to store and transmit music files.
500 Times Better Than an 82 Femtosecond Clock
The Leo GX has a sealed clock module built-in, with two temperature-controlled rubidium atomic clocks inside, each made from a stress-compensated cut crystal oscillator to achieve thermal and mechanical elasticity, resulting in low phase noise performance.
Its signal frequency is very high, with a base signal frequency of 90.316MHz for 44.1KHz and 98.304MHz for 48KHz.
How accurate is this clock? The manufacturer states that they describe its precision based on Allan Deviation, observing phase noise at +/- 1Hz and +/- 0.1Hz frequencies. The Allan Deviation of the Leo GX is 2E-12 (1 second), equivalent to the phase noise of a 10MHz rubidium atomic clock at -110dBc/Hz at +/- 1Hz, which is 500 times smaller than the jitter of the 82 femtosecond clocks on the market.

This technical description might be hard to understand, but the last sentence is clear: the Leo GX’s jitter is 500 times less than that of an 82 femtosecond clock.
If you think an 82 femtosecond clock is impressive, the Leo GX is 500 times more impressive.
The preamp is the MBL 5011 preamp.
Abandoning PLL Phase-Locked Loop Architecture, Using External Clock Directly
Furthermore, when the entire G series is set up, the function of the master clock is different.
A typical external master clock provides an external time to the DAC through a phase-locked loop (PLL) architecture, synchronizing the DAC’s clock with the external clock.

However, Auralic believes this architecture is not good enough. Firstly, it introduces phase noise, solving the timing error but creating other noise.
Secondly, the precision and performance of this time adjustment are limited by the DAC’s internal clock circuitry, affecting not only the time frequency in the digital domain but also the analog waveform.
So how does Auralic solve this? They don’t do synchronization but instead use the external master clock directly as the DAC’s clock. In other words, when the Vega G2 is connected to the Leo GX, it bypasses the internal clock circuitry of the Vega G2, and the Vega G2 uses the Leo GX as its working clock.
Moreover, if the Vega G2 is also connected to the Aries G2 and the upcoming Sirius G2 upsampler, they all follow the Leo G2’s lead.
By not using PLL, the aforementioned limitations are avoided.
The power amp is the MBL 9007 power amp in bridged mono mode.
Optical Isolation to Avoid Interference, Dual Power Supply for Independent Power

Additionally, to avoid interference, the path from the Leo GX’s time signal output terminal to the internal clock circuit uses optical isolation design.
Through optical fiber transmission, it ensures no electrical interference.
The chassis, like other G series equipment, is made from a whole block of aluminum alloy CNC cut, effectively shielding EMI electromagnetic interference, creating a favorable working environment for the Leo GX.
Internally, there are two independent power supplies, using ultra-quiet 10uV linear power supplies, all made by Purer Power in the USA. One is for the logic processing circuit, and the other is for the clock circuit.
The Leo GX’s time signal output terminal to the internal clock circuit uses optical isolation design.
Through optical fiber transmission, it ensures no electrical interference.

Internally, there are two independent power supplies, using ultra-quiet 10uV linear power supplies, all made by Purer Power in the USA. One is for the logic processing circuit, and the other is for the clock circuit.
The Leo GX has a sealed clock module built-in, with two temperature-controlled rubidium atomic clocks inside, each made from a stress-compensated cut crystal oscillator to achieve thermal and mechanical elasticity, resulting in low phase noise performance.
Its signal frequency is very high, with a base signal frequency of 90.316MHz for 44.1KHz and 98.304MHz for 48KHz.
The Best Clock Digital Cable for Optimal Performance
Another crucial aspect is the digital cable used to transmit the time signal.
Because the Leo GX operates at a high frequency, the digital cable used must be able to transmit such signals.

They selected military-grade aviation cables, capable of effectively transmitting 60GHz signals.
However, the manufacturer later found a set of German-made clock digital cables, reportedly with even better performance.
But this is just “hearsay.” I couldn’t hear the standard version of the cables at Yisheng; they imported only the upgraded version based on the manufacturer’s recommendation, which is slightly more expensive, but the manufacturer claims the improvement is worth the price, so they simply imported the upgraded version.
This is good, as users can be sure that they are getting the best performance from the Leo GX.
When purchasing the Leo GX, a digital cable about 20 cm long is included. What is this for? This cable is used to replace the internal clock cable of the Vega G2.
The replacement method is simple: turn the Vega G2 over, remove the fixing screws, and you can open the bottom plate to see the internal cable connecting the clock terminal. Rotate the terminal fixing head to remove the cable.

It seems that the later-released Leo GX also includes a hardware upgrade for the Vega G2.
This is the interior of the Auralic Vega G2 DAC. The blue L-shaped wire seen in the picture is the internal digital cable for transmitting the time signal. After purchasing the LEO GX, this cable needs to be replaced.
Additionally, you can see the two R2R volume control modules inside, and the Class A amplification module with heat sinks on top, responsible for the analog output.
L-Link Cable Must Be Connected
Connecting the Vega G2 is also simple. The back of the Leo GX has only three terminals besides the power supply: one for the clock, one Lightning-Link HDMI terminal, and one RJ45 network terminal.
The network cable can be connected or not, as it is used for firmware updates.
The Lightning-Link HDMI cable must be connected, as it is used for communication with the Vega G2. The time goes through the clock cable, and control goes through the L-Link cable, each on its own, without interference.

The manufacturer informs that the Leo GX needs to be powered on for 1 hour before the machine reaches its optimal state. Before this, although it can be listened to, a countdown timer will appear on the screen, indicating the remaining time until the optimal state.
Once the countdown is complete, a checkmark will appear, meaning the Leo GX is ready.
It seems that users can actually keep it powered on, as the Leo GX doesn’t consume much power. When powered on, it only consumes 15W, while during the warm-up hour, it consumes 30W.
To always have good music to listen to, it can actually be kept on.
This is the back terminal of the Leo GX. Remember: the L-Link must be connected with an HDMI cable.
This is the back terminal of the Vega G2.
Vega G2 Users, Please Pay Close Attention
The above is my first encounter with the Auralic Leo GX at Yisheng Audio.
Here, I recommend all users who have already purchased the Vega G2 to arrange a listening session with Yisheng. The Leo GX is truly very, very effective.
Equipment Specifications
- Type: Auralic Vega G2 Dedicated Master Clock
- Sampling Rate: PCM 44.1KHz to 38sKHz, 32bit, DSD64 to DSD256
- Clock Frequency: 90.3168MHz (44.1KHz) | 98.3040MHz (48KHz)
- Dimensions: 340 x 320 x 80cm
- Weight: 8.1KG